24 research outputs found
On a Method For Reconstructing Computed Tomography Datasets from an Unstable Source
As work continues in neutron computed tomography, at Los Alamos Neutron Science Center (LANSCE) and other locations, source reliability over the long imaging times is an issue of increasing importance. Moreover, given the time commitment involved in a single neutron image, it is impractical to simply discard a scan and restart in the event of beam instability. In order to mitigate the cost and time associated with these options, strategies are presented in the current work to produce a successful reconstruction of computed tomography data from an unstable source. The present work uses a high energy neutron tomography dataset from a simulated munition collected at LANSCE to demonstrate the method, which is general enough to be of use in conjunction with unstable X-ray computed tomography sources as well
Short-Pulse Laser-Driven Moderated Neutron Source
Neutron production with laser-driven neutron sources was demonstrated. We outline the basics of laser-driven neutron sources, highlight some fundamental advantages, and quantitatively compare the neutron production at the TRIDENT laser sources with the well-established LANSCE pulsed neutron spallation source. Ongoing efforts by our team to continue development of these sources, in particular the LANSCE-ina-box instrument, are described. The promise of ultra-intense lasers as drivers for brilliant, compact, and highly efficient particle accelerators portends driving next-generation neutron sources, potentially replacing in some cases much larger conventional accelerators
Monte carlo study of imaging plate response to laser-driven aluminum ion beams
We measured the response of BAS-TR imaging plate (IP) to energetic aluminum ions up to 222 MeV, and compared it with predictions from a Monte Carlo simulation code using two different IP response models. Energetic aluminum ions were produced with an intense laser pulse, and the response was evaluated from cross-calibration between CR-39 track detector and IP energy spectrometer. For the first time, we obtained the response function of jthe BAS-TR IP for aluminum ions with a kinetic energy as high as 222 MeV. On close examination of the two IP response models, we confirm that the exponential model fits our experimental data better. Moreover, we find that the IP sensitivity in the exponential model is nearly constant in this energy range, suggesting that the response function can be determined even with little experimental data.11Nsciescopu
Short-Pulse Laser-Driven Moderated Neutron Source
Neutron production with laser-driven neutron sources was demonstrated. We outline the basics of laser-driven neutron sources, highlight some fundamental advantages, and quantitatively compare the neutron production at the TRIDENT laser sources with the well-established LANSCE pulsed neutron spallation source. Ongoing efforts by our team to continue development of these sources, in particular the LANSCE-ina-box instrument, are described. The promise of ultra-intense lasers as drivers for brilliant, compact, and highly efficient particle accelerators portends driving next-generation neutron sources, potentially replacing in some cases much larger conventional accelerators
Recommended from our members
Development of the SCRF Power Coupler for the APT Accelerator
The team responsible for the design of the Accelerator Production of Tritium (APT) superconducting (SC) radio frequency (RF) power coupler has developed two 700-MHz, helium gas-cooled power couplers. One has a fixed inner conductor and the other has an adjustable inner conductor (gamma prototype and alpha prototype). The power couplers will be performance tested in the near future. This paper discusses the mechanical design and fabrication techniques employed in the development of each power coupler. This includes material selection, copper coating, assembly sequences, and metal joining procedures, as well as the engineering analyses performed to determine the dynamic response of the inner conductors due to environmental excitations. A bellows is used in both prototype inner conductors in the area near the ceramic RF window, to compensate for thermal expansion and mechanical tolerance build-up. In addition, a bellows is used near the tip of the inner conductor of the alpha prototype for running the power coupler after it is installed on the accelerator. Extensive analytical work has been performed to determine the static loads transmitted by the bellows due to thermally induced expansion on the inner conductor and on the RF window. This paper also discusses this analysis, as well as the mechanical analysis performed to determine the final geometric shape of the bellows. Finally, a discussion of the electromagnetic analysis used to optimize the performance of the power couplers is included
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
International audienceSince two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~4.10^7 neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
International audienceSince two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~4.10^7 neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
International audienceSince two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~4.10^7 neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
International audienceSince two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~4.10^7 neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
International audienceSince two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~4.10^7 neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography