7 research outputs found

    Effect of matrix plant, season and minigarden on Pinus radiata minicutting

    Get PDF
    A estaquia de genótipos superiores de Pinus radiata é uma prática comum na silvicultura. Para sua utilização no Brasil, protocolos de propagação precisam ser estabelecidos. Este trabalho avaliou a miniestaquia aplicada à produção de mudas da espécie, estudando a posição de coleta de broto na planta matriz, a estação do ano e o minijardim. Plantas matrizes seminais, com 1 m de altura e 1,5 anos de idade, foram utilizadas para a produção de miniestacas. Três ensaios consecutivos foram feitos: (i) o enraizamento das miniestacas coletadas de três posições nas matrizes (topo, intermediário e basal), (ii) a influência do minijardim (vaso, canaletão e campo) no desenvolvimento de minicepas e (iii) o efeito da estação do ano (inverno, primavera e verão) sobre o desenvolvimento de miniestacas coletadas de minicepas no canaletão, no vaso e em campo. As miniestacas coletadas da região intermediária das matrizes, com 1,5 anos de idade, apresentaram maior enraizamento do que as coletadas no topo e na região basal. As melhores estações para o desenvolvimento dos brotos foram inverno e primavera, em ambientes de vaso e campo. O verão promoveu melhor desenvolvimento das miniestacas em casa de vegetação, a partir de matrizes cultivadas em canaletão.Palavras-chave: Clonagem; conífera; produção de muda; propagação vegetativa. AbstractEffect of matrix plant, season and minigarden on Pinus radiata minicutting. Cutting of superior genotypes of Pinus radiata is current in forestry. For such practice in Brazil, protocols of propagation need to be established. We evaluated the mini-cutting applied to seedling production, focusing the collection point in matrix plant, season, and minigarden. We used seminal matrix 1 m height and 1.5 years old for mini-cutting production. Three consecutive trials were made: (i) the rooting of mini-cuttings collected from three points in the matrix (top, intermediate and basal), (ii) the influence of minigarden (pot, gutters and field) in development of rooted, and (iii) the effect of season (winter, spring and summer) on the development of rooted cuttings collected in pot, gutters and field. The mini-cuttings collected from the intermediate region of the 1.5 years old seedlings matrices had higher rooting than those collected from the top and basal region. The best time for the development of buds was winter and spring in pots as well as field environments. Summer promoted the best development of mini-cuttings, in greenhouse, from matrix plant grown in gutters.Keywords: Cloning; conifer; seedling production, vegetative propagation.AbstractCutting of superior genotypes of Pinus radiata is current in forestry. For such practice in Brazil, protocols of propagation need to be established. We evaluated the mini-cutting applied to seedling production, focusing the collection point in matrix plant, season, and minigarden. We used seminal matrix 1 m height and 1.5 years old for mini-cutting production. Three consecutive trials were made: (i) the rooting of mini-cuttings collected from three points in the matrix (top, intermediate and basal), (ii) the influence of minigarden (pot, gutters and field) in development of rooted, and (iii) the effect of season (winter, spring and summer) on the development of rooted cuttings collected in pot, gutters and field. The mini-cuttings collected from the intermediate region of the 1.5 years old seedlings matrices had higher rooting than those collected from the top and basal region. The best time for the development of buds was winter and spring in pots as well as field environments. Summer promoted the best development of mini-cuttings, in greenhouse, from matrix plant grown in gutters.Keywords: Cloning; conifer; seedling production, vegetative propagation

    Evaluation methodology of the aggressiveness of isolated of Sphaeropsis sapinea on Pinus taeda

    Get PDF
    Sphaeropsis sapinea é conhecido como importante patógeno em Pinus, causando seca de ponteiros e morte de árvores em plantios comerciais. No Brasil, o primeiro relato da ação de S. sapinea ocorreu na década de 1940, durante introdução de Pinus radiata no estado de São Paulo, dizimando totalmente os plantios. Com o objetivo de selecionar material genético resistente a essa doença no Brasil, desenvolveu-se uma metodologia para avaliar a agressividade de isolados de S. sapinea em frutos de maçã e Pinus taeda. Três ambientes (estufas com diferentes regimes de irrigação), dois métodos de inoculação (com e sem injúria) e três métodos de reisolamento do fungo (meio BDA, câmara úmida em saco plástico e em gerbox úmido) foram testados. Resultados mostraram diferenças significativas (p<0,05)na agressividade dos isolados em frutos de maçã e em mudas de P. taeda. O melhor método de reisolamento foi a câmara úmida e o melhor ambiente para a incubação de mudas de P. taeda foi em estufa coberta com lona plástica, com duas aspersões diárias de 4 minutos. Outro resultado foi que injúria é necessária para inoculação de S. sapinea. Os resultados da caracterização mostraram diferenças significativas na agressividade e diversidade genética do patógeno em todos os hospedeiros testados.Palavras-chave: Fungo; inoculação; melhoramento genético; Pinus.AbstractEvaluation methodology of the aggressiveness of isolated of Sphaeropsis sapinea on Pinus taeda. Sphaeropsis sapineais known as an important pathogen of Pinus, causing tip blight and death of trees in commercial plantings. In Brazil, the first report of this disease was done in the 1940s, during introduction of Pinus radiata in São Paulo State, when these plantations were destroyed by S sapinea. In order to select material resistant to such disease in Brazil,a methodology was developed to evaluate aggressiveness in S. sapinea isolates on apple fruits and Pinus taeda. Three environments (greenhouse with different regimes of irrigation), two inoculation methods (with and without injury) and three methods of re-isolation of fungus (PDA medium, moist chamber in plastic bags and moist gerbox) had been tested. Results pointed to significant differences (p < 0,05) on aggressiveness in apple fruit and P. taeda seedlings. The better method to re-isolate was moist chamber in plastic bags and the better environment to incubate inoculated seedlings was greenhouse with two diary aspersion of four minutes. Other result was that injury is necessary for a good inoculation of S. sapinea. The characterization results have presented significant differences in relation to aggressiveness and genetic diversity of the pathogen in all tested hosts.Keywords: Breeding; fungus; inoculation; Pinus.Sphaeropsis sapineais known as an important pathogen of Pinus, causing tip blight and death of trees in commercial plantings. In Brazil, the first report of this disease was done in the 1940s, during introduction of Pinus radiata in São Paulo State, when these plantations were destroyed by S sapinea. In order to select material resistant to such disease in Brazil,a methodology was developed to evaluate aggressiveness in S. sapinea isolates on apple fruits and Pinus taeda. Three environments (greenhouse with different regimes of irrigation), two inoculation methods (with and without injury) and three methods of re-isolation of fungus (PDA medium, moist chamber in plastic bags and moist gerbox) had been tested. Results pointed to significant differences (p < 0,05) on aggressiveness in apple fruit and P. taeda seedlings. The better method to re-isolate was moist chamber in plastic bags and the better environment to incubate inoculated seedlings was greenhouse with two diary aspersion of four minutes. Other result was that injury is necessary for a good inoculation of S. sapinea. The characterization results have presented significant differences in relation to aggressiveness and genetic diversity of the pathogen in all tested hosts

    Seleção precoce de progênies de <i>Pinus radiata </i>a <i>Sphaeropsis sapinea</i>

    Get PDF
    http://dx.doi.org/10.5902/198050985734<br /><br />Sphaeropsis sapinea é um importante patógeno para Pinus radiata, causando seca de ponteiros e morte de árvores, em plantios comerciais. Este estudo teve como objetivo selecionar progênies de Pinus radiata resistentes ao patógeno. Mudas de 16 progênies de Pinus radiata foram inoculadas com três isolados monospóricos do patógeno, em condição de casa de vegetação. Foram avaliados o comprimento das lesões e o grau de secamento dos ponteiros. Os resultados indicaram que a metodologia de seleção precoce foi adequada para selecionar progênies de Pinus radiata resistentes ao Sphaeropsis sapinea. A herdabilidade média das progênies variou de acordo com o isolado testado e o critério de seleção utilizado

    EARLY SELECTION OF Pinus radiata PROGENIES TO Sphaeropsis sapinea

    Get PDF
    Sphaeropsis sapinea é um importante patógeno para Pinus radiata , causando seca de ponteiros e morte de árvores, em plantios comerciais. Este estudo teve como objetivo selecionar progênies de Pinus radiata resistentes ao patógeno. Mudas de 16 progênies de Pinus radiata foram inoculadas com três isolados monospóricos do patógeno, em condição de casa de vegetação. Foram avaliados o comprimento das lesões e o grau de secamento dos ponteiros. Os resultados indicaram que a metodologia de seleção precoce foi adequada para selecionar progênies de Pinus radiata resistentes ao Sphaeropsis sapinea. A herdabilidade média das progênies variou de acordo com o isolado testado e o critério de seleção utilizado.Sphaeropsis sapinea is an important pathogen for some Pinus radiata causing tip blight and death of trees, in commercial plantings. This study was developed to select Pinus radiata progenies resistant to the pathogen, for new plantings in Brazil. Seedlings tips of 16 Pinus radiata progenies were inoculated with three pathogen monosporic isolates of Sphaeropsis sapinea, under greenhouse conditions. Lesions length and tip blight degree were evaluated. Responses of progenies to the pathogen varied according to tested isolate. The results indicated that early selection methodology was adequate to select Pinus radiata progenies resistant against Sphaeropsis sapinea. Average heritability of the progenies varied according to tested isolate and the selection criterion used

    Methodology for sporulation and production of monoconidial isolates of Sphaeropsis sapinea Metodologia para esporulação e produção de culturas monospóricas de Sphaeropsis sapinea

    No full text
    Sphaeropsis sapinea is one of main pathogens that causes losses in commercial plantations of Pinus&lt;br /&gt;spp. Studies for control based on genetic resistance can be done by inoculating different monosporic isolates on&lt;br /&gt;pine populations and selectioning the resistant individuals. This work describes a methodology for pycnidia production in vitro and S. sapinea monoconidial cultures, using an agar-water medium with sterile pine needles. Four S. sapinea isolates were tested e pycnidia and mature conidia were observed after 14 days of incubation, under continuous fluorescent light, in BOD, at 25 °C. Pycnidia were triturated in sterile water and conidia germinated after two hours of incubation in water-agar, in BOD, at 25 °C. Germinated conidia formed colonies which were purified in malt extract-agar and maintained in test tubes with the same medium, covered with sterile mineral oil for preservation. This methodology revealed to be  adequated for production of monoconidial colonies&lt;br /&gt;of S. sapineaSphaeropsis sapinea é um dos principais patógenos causadores de perdas em plantios comerciais de Pinus spp. Estudos de controle por resistência genética podem ser feitos pela inoculação de vários isolados monospóricos em populações de pínus e selecionando-se os indivíduos resistentes. Este trabalho descreve uma metodologia de produção de picnídios in vitro e culturas monospóricas de S. sapinea, usando um meio ágarágua (AA) com fragmentos de acículas de Pinus taeda esterilizadas. Quatro isolados de S. sapinea foram testados e os picnídios e conídios maduros foram observados após 14 dias de incubação, sob luz fria em BOD, a 25 °C. Os picnídios foram triturados em água e os conídios germinaram após duas horas de incubação em meio AA, em BOD, a 25 ºC. Os conídios germinados formaram  colônias que foram purificadas em meio extrato de malteágar e mantidas em tubos de ensaio com o mesmo meio e imersas em óleo mineral estéril para preservação. A metodologia revelou ser adequada para a produção de colônias monospóricas do fungo S. sapinea
    corecore