225 research outputs found
Observing the Suppression of Superconductivity in RbEuFe4As4 by Correlated Magnetic Fluctuations
In this Letter, we describe quantitative magnetic imaging of superconducting vortices in RbEuFe4As4 in order to investigate the unique interplay between the magnetic and superconducting sublattices. Our scanning Hall microscopy data reveal a pronounced suppression of the superfluid density near the magnetic ordering temperature in good qualitative agreement with a recently developed model describing the suppression of superconductivity by correlated magnetic fluctuations. These results indicate a pronounced exchange interaction between the superconducting and magnetic subsystems in RbEuFe4As4, with important implications for future investigations of physical phenomena arising from the interplay between them
Correlations of structural, magnetic, and dielectric properties of undoped and doped CaCu3Ti4O12
The present work reports synthesis, as well as a detailed and careful
characterization of structural, magnetic, and dielectric properties of
differently tempered undoped and doped CaCu3Ti4O12 (CCTO) ceramics. For this
purpose, neutron and x-ray powder diffraction, SQUID measurements, and
dielectric spectroscopy have been performed. Mn-, Fe-, and Ni-doped CCTO
ceramics were investigated in great detail to document the influence of
low-level doping with 3d metals on the antiferromagnetic structure and
dielectric properties. In the light of possible magnetoelectric coupling in
these doped ceramics, the dielectric measurements were also carried out in
external magnetic fields up to 7 T, showing a minor but significant dependence
of the dielectric constant on the applied magnetic field. Undoped CCTO is
well-known for its colossal dielectric constant in a broad frequency and
temperature range. With the present extended characterization of doped as well
as undoped CCTO, we want to address the question why doping with only 1% Mn or
0.5% Fe decreases the room-temperature dielectric constant of CCTO by a factor
of ~100 with a concomitant reduction of the conductivity, whereas 0.5% Ni
doping changes the dielectric properties only slightly. In addition,
diffraction experiments and magnetic investigations were undertaken to check
for possible correlations of the magnitude of the colossal dielectric constants
with structural details or with magnetic properties like the magnetic ordering,
the Curie-Weiss temperatures, or the paramagnetic moment. It is revealed, that
while the magnetic ordering temperature and the effective moment of all
investigated CCTO ceramics are rather similar, there is a dramatic influence of
doping and tempering time on the Curie-Weiss constant.Comment: 10 pages, 11 figure
Characterisation of the muon beams for the Muon Ionisation Cooling Experiment
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.2â2.3 Ïâmm-rad horizontally and 0.6â1.0 Ïâmm-rad vertically, a horizontal dispersion of 90â190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE
First demonstration of ionization cooling by the Muon Ionization Cooling Experiment
High-brightness muon beams of energy comparable to those produced by
state-of-the-art electron, proton and ion accelerators have yet to be realised.
Such beams have the potential to carry the search for new phenomena in
lepton-antilepton collisions to extremely high energy and also to provide
uniquely well-characterised neutrino beams. A muon beam may be created through
the decay of pions produced in the interaction of a proton beam with a target.
To produce a high-brightness beam from such a source requires that the phase
space volume occupied by the muons be reduced (cooled). Ionization cooling is
the novel technique by which it is proposed to cool the beam. The Muon
Ionization Cooling Experiment collaboration has constructed a section of an
ionization cooling cell and used it to provide the first demonstration of
ionization cooling. We present these ground-breaking measurements.Comment: 19 pages and 6 figure
Transverse Emittance Reduction in Muon Beams by Ionization Cooling
Accelerated muon beams have been considered for next-generation studies of
high-energy lepton-antilepton collisions and neutrino oscillations. However,
high-brightness muon beams have not yet been produced. The main challenge for
muon acceleration and storage stems from the large phase-space volume occupied
by the beam, derived from the muon production mechanism through the decay of
pions from proton collisions. Ionization cooling is the technique proposed to
decrease the muon beam phase-space volume. Here we demonstrate a clear signal
of ionization cooling through the observation of transverse emittance reduction
in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon
Ionization Cooling Experiment (MICE). The measurement is well reproduced by the
simulation of the experiment and the theoretical model. The results shown here
represent a substantial advance towards the realization of muon-based
facilities that could operate at the energy and intensity frontiers.Comment: 23 pages and 5 figure
Demonstration of cooling by the Muon Ionization Cooling Experiment
The use of accelerated beams of electrons, protons or ions has furthered the development of nearly every scientific discipline. However, high-energy muon beams of equivalent quality have not yet been delivered. Muon beams can be created through the decay of pions produced by the interaction of a proton beam with a target. Such âtertiaryâ beams have much lower brightness than those created by accelerating electrons, protons or ions. High-brightness muon beams comparable to those produced by state-of-the-art electron, proton and ion accelerators could facilitate the study of leptonâantilepton collisions at extremely high energies and provide well characterized neutrino beams1,2,3,4,5,6. Such muon beams could be realized using ionization cooling, which has been proposed to increase muon-beam brightness7,8. Here we report the realization of ionization cooling, which was confirmed by the observation of an increased number of low-amplitude muons after passage of the muon beam through an absorber, as well as an increase in the corresponding phase-space density. The simulated performance of the ionization cooling system is consistent with the measured data, validating designs of the ionization cooling channel in which the cooling process is repeated to produce a substantial cooling effect9,10,11. The results presented here are an important step towards achieving the muon-beam quality required to search for phenomena at energy scales beyond the reach of the Large Hadron Collider at a facility of equivalent or reduced footprint6
Electron-muon ranger: performance in the MICE muon beam
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100â280 MeV/c
Electron-muon ranger: performance in the MICE muon beam
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100â280 MeV/c
- âŠ