New camera tube improves ultrasonic inspection system

Electron multiplier, incorporated into the camera tube of an ultrasonic imaging system, improves resolution, effectively shields low level circuits, and provides a high level signal input to the television camera. It is effective for inspection of metallic materials for bonds, voids, and homogeneity

Material growth and characterization directed toward improving III-V heterojunction solar cells

In addition to the existing materials growth laboratory, the photolithographic facility and the device testing facility were completed. The majority of equipment for data acquisition, solar cell testing, materials growth and device characterization were received and are being put into operation. In the research part of the program, GaAs and GaA1As layers were grown reproducibly on GaAs substrates. These grown layers were characterized as to surface morphology, thickness and thickness uniformity. The liquid phase epitaxial growth process was used to fabricate p-n junctions in Ga(1-x)A1(x)As. Sequential deposition of two alloy layers was accomplished and detailed analysis of the effect of substrate quality and dopant on the GaA1As layer quality is presented. Finally, solar cell structures were formed by growing a thin p-GaA1As layer upon an epitaxial n-GaA1As layer. The energy gap corresponding to the long wavelength cutoff of the spectral response characteristic was 1.51-1.63 eV. Theoretical calculations of the spectral response were matched to the measured response

Material growth and characterization for solid state devices

Manganese was used as the dopant for p-type InGaAs layers grown on semi-insulating (Fe-doped) and n-type (Sn-doped) InP substrates. Optical, electrical (Hall) and SIMS measurements were used to characterize the layers. Mn-diffusion into the substrate (during the growth of In GaAs) was observed only when Fe-doped substrates were used. Quaternary layers of two compositions corresponding to wavelengths (energy gaps) of approximated 1.52 micrometers were successfully grown at a constant temperature of 640 C and InP was grown in the temperature range of 640 C to 655 C. A study of the effect of pulses on the growth velocity of InP indicated no significant change as long as the average applied current was kept constant. A system for depositing films of Al2O3 by the pyrolysis of aluminum isopropoxide was designed and built. Deposited layers on Si were characterized with an ellipsometer and exhibited indices of refraction between 1.582 and 1.622 for films on the order of 3000 A thick. Undoped and p-type (Mn-doped) InGaAs epitaxial layers were also grown on Fe-doped InP substrates through windows in sputtered SiO2 (3200 A thick) layers

Review of aquaculture and fish consumption in Bangladesh

Fish play a crucial role in the Bangladeshi diet, providing more than 60% of animal source food, representing a crucial source of micro-nutrients, and possessing an extremely strong cultural attachment. Fish (including shrimp and prawn) is the second most valuable agricultural crop, and its production contributes to the livelihoods and employment of millions. The culture and consumption of fish therefore has important implications for national food and nutrition security, poverty and growth. This review examines the current state of knowledge on the aquaculture sector and fish consumption in Bangladesh, based on extensive analysis of secondary sources (including unpublished data unavailable elsewhere), consultation with various experts and specially conducted surveys. The review is comprised of three sections. Section 1 describes the main systems of aquaculture production in terms of their technical and social characteristics and outputs. Section 2 addresses issues relating to seed and feed. The final section analyses fish consumption patterns and demand, and attempts to estimate the volumes of fish produced from a range of sources.Food fish, Aquaculture, Food consumption, Fish consumption, Pond culture, Rice field aquaculture, Bangladesh,

Effective equations governing an active poroelastic medium

In this work we consider the spatial homogenization of a coupled transport and fluid-structure interaction model, to the end of deriving a system of effective equations describing the flow, elastic deformation, and transport in an active poroelastic medium. The `active' nature of the material results from a morphoelastic response to a chemical stimulant, in which the growth timescale is strongly separated from other elastic timescales. The resulting effective model is broadly relevant to the study of biological tissue growth, geophysical flows (e.g. swelling in coals and clays) and a wide range of industrial applications (e.g. absorbant hygiene products). The key contribution of this work is the derivation of a system of homogenized partial differential equations describing macroscale growth, coupled to transport of solute, that explicitly incorporates details of the structure and dynamics of the microscopic system, and, moreover, admits finite growth and deformation at the pore-scale. The resulting macroscale model comprises a Biot-type system, augmented with additional terms pertaining to growth, coupled to an advection-reaction-diffusion equation. The resultant system of effective equations is then compared to other recent models under a selection of appropriate simplifying asymptotic limits

Solar Cell Enhancement from Supercritical CO 2 Dye Surface Modification of Mesoporous TiO 2 Photoanodes

In recent years, in an effort to reach Net Zero Emissions, there has been growing interest by various academic and industry communities to develop chemicals and industrial processes that are circular, sustainable and green. We report the rapid, simple and effective surface modification of a porous metal oxide with organic dyes using supercritical carbon dioxide (scCO2). Titanium dioxide (TiO2) photoanodes were coated in very short times, under mild conditions and the excess dye recovered afterwards for reuse. The process obviates the need for conventional toxic solvents, the generation of unwanted waste streams, and more importantly, we see an unexpected device performance enhancement of 212 and 163 % for TerCOOTMS, 2 a and TerCN/COOTBDMS, 4 dyes, respectively, when compared to the conventional solvent deposition method

The green-striped forest looper on Vancouver Island

n/

The measurement of Navier slip on individual nanoparticles in liquid

The Navier slip condition describes the motion of a liquid, relative to a neighboring solid surface, with its characteristic Navier slip length being a constitutive property of the solid-liquid interface. Measurement of this slip length is complicated by its small magnitude, expected in the nanometer range based on molecular simulations. Here, we report an experimental technique that interrogates the Navier slip length on individual nanoparticles immersed in liquid, with sub-nanometer precision. Proof-of-principle experiments on individual, citrate-stabilized, gold nanoparticles in water give a constant slip length of 2.7$\pm$0.6 nm (95% C.I.) - independent of particle size. Achieving this feature of size independence is central to any measurement of this constitutive property, which is facilitated through the use of individual particles of varying radii. This demonstration motivates studies that can now validate the wealth of existing molecular simulation data on slip.Comment: 12 pages, 4 figure

Seismo-acoustic ray model benchmarking against experimental tank data

Acoustic predictions of the recently developed TRACEO ray model, which accounts for bottom shear properties, are benchmarked against tank experimental data from the EPEE-1 and EPEE-2 (Elastic Parabolic Equation Experiment) experiments. Both experiments are representative of signal propagation in a Pekeris-like shallow-water waveguide over a non-flat isotropic elastic bottom, where significant interaction of the signal with the bottom can be expected. The benchmarks show, in particular, that the ray model can be as accurate as a parabolic approximation model benchmarked in similar conditions. The results of benchmarking are important, on one side, as a preliminary experimental validation of the model and, on the other side, demonstrates the reliability of the ray approach for seismo-acoustic applications. (C) 2012 Acoustical Society of America. [http://dx.doi.org/10.1121/1.4734236