1,469 research outputs found
Exploring the kinetics of switchable polymer surfaces with dynamic tensiometry
Switchable polymer multilayer coatings consisting of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) were prepared via Layer-by-Layer (LbL) assembly and post-functionalized with poly(ethylene glycol methyl ether) (PEG). This resulted in a soft polar coating that reversibly and repeatedly rearranges from hydrophobic to hydrophilic (or vice versa) when contacted with water (or air). Goniometry is used to quantify the forward surface rearrangement in the form of transient measurements of the water contact angle. By examining the time evolution of the water contact angle at various temperatures, the apparent activation energy for the forward surface rearrangement (E[subscript a,f]) can be determined. Further insight can be gained into the kinetics of this surface reconstruction process by utilizing dynamic tensiometry to measure the evolution in the contact angle of a liquid meniscus at several rates and temperatures as it advances or recedes over the multilayer films. A simple first-order thermally-activated rate process is shown to describe the forward and reverse surface reconstruction and enables the shape of the measured tensiometric force curves during repeated immersion and emersion to be predicted quantitatively. Using this model we show that the character of this switchable surface coating can appear to be hydrophobic or hydrophilic depending on a single dimensionless parameter which incorporates the characteristic time-scale for temperature-dependent surface rearrangement, the speed of immersion and the capillary length of the liquid meniscus.Air Force Research Laboratory (Wright-Patterson Air Force Base, Ohio). Propulsion DirectorateUnited States. Air Force Office of Scientific ResearchUnited States. Army Research Office (Contract W911NF-07-D-0004)National Science Foundation (U.S.). Materials Research Science and Engineering Centers (Program) (Award DMR-0819762
Utilizing Dynamic Tensiometry to Quantify Contact Angle Hysteresis and Wetting State Transitions on Nonwetting Surfaces
Goniometric techniques traditionally quantify two parameters, the advancing and receding contact angles, that are useful for characterizing the wetting properties of a solid surface; however, dynamic tensiometry, which measures changes in the net force on a surface during the repeated immersion and emersion of a solid into a probe liquid, can provide further insight into the wetting properties of a surface. We detail a framework for analyzing tensiometric results that allows for the determination of wetting hysteresis, wetting state transitions, and characteristic topographical length scales on textured, nonwetting surfaces, in addition to the more traditional measurement of apparent advancing and receding contact angles. Fluorodecyl POSS, a low-surface-energy material, was blended with commercially available poly(methyl methacrylate) (PMMA) and then dip- or spray-coated onto glass substrates. These surfaces were probed with a variety of liquids to illustrate the effects of probe liquid surface tension, solid surface chemistry, and surface texture on the apparent contact angles and wetting hysteresis of nonwetting surfaces. Woven meshes were then used as model structured substrates to add a second, larger length scale for the surface texture. When immersed into a probe liquid, these spray-coated mesh surfaces can form a metastable, solid–liquid–air interface on the largest length scale of surface texture. The increasing hydrostatic pressure associated with progressively greater immersion depths disrupts this metastable, composite interface and forces penetration of the probe liquid into the mesh structure. This transition is marked by a sudden change in the wetting hysteresis, which can be systematically probed using spray-coated, woven meshes of varying wire radius and spacing. We also show that dynamic tensiometry can accurately and quantitatively characterize topographical length scales that are present on microtextured surfaces.United States. Air Force Office of Scientific Research (W 911NF-07-D-0004
Designing Robust Hierarchically Textured Oleophobic Fabrics
Commercially available woven fabrics (e.g., nylon- or PET-based fabrics) possess inherently re-entrant textures in the form of cylindrical yarns and fibers. We analyze the liquid repellency of woven and nanotextured oleophobic fabrics using a nested model with n levels of hierarchy that is constructed from modular units of cylindrical and spherical building blocks. At each level of hierarchy, the density of the topographical features is captured using a dimensionless textural parameter D[subscript n][superscript *]. For a plain-woven mesh comprised of chemically treated fiber bundles (n = 2), the tight packing of individual fibers in each bundle (D[subscript 2][superscript *] ≈ 1) imposes a geometric constraint on the maximum oleophobicity that can be achieved solely by modifying the surface energy of the coating. For liquid droplets contacting such tightly bundled fabrics with modified surface energies, we show that this model predicts a lower bound on the equilibrium contact angle of θE ≈ 57° below which the Cassie–Baxter to Wenzel wetting transition occurs spontaneously, and this is validated experimentally. We demonstrate how the introduction of an additional higher order micro-/nanotexture onto the fibers (n = 3) is necessary to overcome this limit and create more robustly nonwetting fabrics. Finally, we show a simple experimental realization of the enhanced oleophobicity of fabrics by depositing spherical microbeads of poly(methyl methacrylate)/fluorodecyl polyhedral oligomeric silsesquioxane (fluorodecyl POSS) onto the fibers of a commercial woven nylon fabric.United States. Army Research Office (W911NF-13-D-0001
Sustainable Drag Reduction in Turbulent Taylor-Couette Flows by Depositing Sprayable Superhydrophobic Surfaces
We demonstrate a reduction in the measured inner wall shear stress in moderately turbulent Taylor-Couette flows by depositing sprayable superhydrophobic microstructures on the inner rotor surface. The magnitude of reduction becomes progressively larger as the Reynolds number increases up to a value of 22% at Re=8.0×10[superscript 4]. We show that the mean skin friction coefficient C[subscript f] in the presence of the superhydrophobic coating can be fitted to a modified Prandtl–von Karman–type relationship of the form (C[subscript f]/2)[[superscript -1/2] = Mln (Re(C[subscript f]/2)[[superscript 1/2]) + N + (b/Δr)Re(C[subscript f]/2)[superscript 1/2] from which we extract an effective slip length of b ≈ 19  μm. The dimensionless effective slip length b[superscript +] = b/δ[subscript ν], where δ[subscript ν] is the viscous length scale, is the key parameter that governs the drag reduction and is shown to scale as b[[superscript +] ~ Re[superscript 1/2] in the limit of high Re.United States. Office of Naval Research (Contract 3002453814
CALHM1-Mediated ATP Release and Ciliary Beat Frequency Modulation in Nasal Epithelial Cells
Mechanical stimulation of airway epithelial cells causes apical release of ATP, which increases ciliary beat frequency (CBF) and speeds up mucociliary clearance. The mechanisms responsible for this ATP release are poorly understood. CALHM1, a transmembrane protein with shared structural features to connexins and pannexins, has been implicated in ATP release from taste buds, but it has not been evaluated for a functional role in the airway. In the present study, Calhm1 knockout, Panx1 knockout, and wild-type mouse nasal septal epithelial cells were grown at an air-liquid interface (ALI) and subjected to light mechanical stimulation from an air puff. Apical ATP release was attenuated in Calhm1 knockout cultures following mechanical stimulation at a pressure of 55 mmHg for 50 milliseconds (p \u3c 0.05). Addition of carbenoxolone, a PANX1 channel blocker, completely abolished ATP release in Calhm1 knockout cultures but not in wild type or Panx1 knockout cultures. An increase in CBF was observed in wild-type ALIs following mechanical stimulation, and this increase was significantly lower (p \u3c 0.01) in Calhm1 knockout cultures. These results demonstrate that CALHM1 plays a newly defined role, complementary to PANX1, in ATP release and downstream CBF modulation following a mechanical stimulus in airway epithelial cells. © 2017 The Author(s)
Three equivalent ordinal notation systems in cubical Agda
We present three ordinal notation systems representing ordinals below epsilon zero in type theory, using recent type-theoretical innovations such as mutual inductive-inductive definitions and higher inductive types. We show how ordinal arithmetic can be developed for these systems, and how they admit a transfinite induction principle. We prove that all three notation systems are equivalent, so that we can transport results between them using the univalence principle. All our constructions have been implemented in cubical Agda
Pediatric And Adult Lung Transplantation For Cystic Fibrosis
AbstractObjective: This paper was undertaken to review the experience at our institution with bilateral sequential lung transplantation for cystic fibrosis.Methods: Since 1989, 103 bilateral sequential lung transplants for cystic fibrosis have been performed (46 pediatric, 48 adult, 9 redo); the mean age was 21 ± 10 years. Cardiopulmonary bypass was used in all but one pediatric (age <18) transplant, and in 15% of adults.Results: Hospital mortality was 4.9%, with 80% of early deaths related to infection. Bronchial anastomotic complications occurred with equal frequency in the pediatric and the adult populations (7.3%). One- and 3-year actuarial survival are 84% and 61%, respectively (no significant difference between pediatric and adult age groups; average follow-up 2.1 ± 1.6 years). Mean forced expiratory volume in 1 second increased from 25% ± 9% before transplantation to 79% ± 35% 1 year after transplantation. Acute rejection occurred 1.7 times per patient-year, with most episodes taking place within the first 6 months after transplantation. The need for treatment of lower respiratory tract infections occurred 1.2 times per patient in the first year after transplantation. Actuarial freedom from bronchiolitis obliterans was 63% at 2 years and 43% at 3 years. Redo transplantation was performed only in the pediatric population and was associated with an early mortality of 33%. Eight living donor transplants (four primary transplants, four redo transplants) were performed with an early survival of 87.5%.Conclusion: Patients with end-stage cystic fibrosis can undergo bilateral lung transplantation with morbidity and mortality comparable to that seen in pulmonary transplantation for other disease entities. (J Thorac Cardiovasc Surg 1998;115:404-14
Decadal changes in summertime reactive oxidized nitrogen and surface ozone over the Southeast United States
Widespread efforts to abate ozone (O3) smog have significantly reduced emissions of nitrogen oxides (NOx) over the past 2 decades in the Southeast US, a place heavily influenced by both anthropogenic and biogenic emissions. How reactive nitrogen speciation responds to the reduction in NOx emissions in this region remains to be elucidated. Here we exploit aircraft measurements from ICARTT (July–August 2004), SENEX (June–July 2013), and SEAC4RS (August–September 2013) and long-term ground measurement networks alongside a global chemistry–climate model to examine decadal changes in summertime reactive oxidized nitrogen (RON) and ozone over the Southeast US. We show that our model can reproduce the mean vertical profiles of major RON species and the total (NOy) in both 2004 and 2013. Among the major RON species, nitric acid (HNO3) is dominant (∼ 42–45%), followed by NOx (31%), total peroxy nitrates (ΣPNs; 14%), and total alkyl nitrates (ΣANs; 9–12%) on a regional scale. We find that most RON species, including NOx, ΣPNs, and HNO3, decline proportionally with decreasing NOx emissions in this region, leading to a similar decline in NOy. This linear response might be in part due to the nearly constant summertime supply of biogenic VOC emissions in this region. Our model captures the observed relative change in RON and surface ozone from 2004 to 2013. Model sensitivity tests indicate that further reductions of NOxemissions will lead to a continued decline in surface ozone and less frequent high-ozone events
Erratum:Suppression of D'yakonov-Perel spin relaxation in InAs and InSb by n-type doping at 300 K (Applied Physics Letters (2003) 83 (5220))
The Role of Convection in Redistributing Formaldehyde to the Upper Troposphere Over North America and the North Atlantic during the Summer 2004 INTEX Campaign
Measurements of CH2O from a tunable diode laser absorption spectrometer (TDLAS) were acquired onboard the NASA DC-8 during the summer 2004 INTEX-NA (Intercontinental Chemical Transport Experiment - North America) campaign to test our understanding of convection and production mechanisms in the upper troposphere (UT, 6-12-km) over continental North America and the North Atlantic Ocean. Point-by-point comparisons with box model calculations, when MHP (CH3OOH) measurements were available for model constraint, resulted in a median CH2O measurement/model ratio of 0.91 in the UT. Multiple tracers were used to arrive at a set of UT CH2O background and perturbed air mass periods, and 46% of the TDLAS measurements fell within the latter category. At least 66% to 73% of these elevated UT observations were caused by enhanced production from CH2O precursors rather than direct transport of CH2O from the boundary layer. This distinction is important, since the effects from the former can last for over a week or more compared to one day or less in the case of convective transport of CH2O itself. In general, production of CH2O from CH4 was found to be the dominant source term, even in perturbed air masses. This was followed by production from MHP, methanol, PAN type compounds, and ketones, in descending order of their contribution. In the presence of elevated NO from lightning and potentially from the stratosphere, there was a definite trend in the CH2O discrepancy, which for the highest NO mixing ratios produced a median CH2O measurement/model ratio of 3.9 in the 10-12-km range. Discrepancies in CH2O and HO2 in the UT with NO were highly correlated and this provided further information as to the possible mechanism(s) responsible. These discrepancies with NO are consistent with additional production sources of both gases involving CH3O2 + NO reactions, most likely caused by unmeasured hydrocarbons
- …