2,278 research outputs found
Sn and Ti influences on intermetallic phases damage in hot dip galvanizing
Protection against metallic materials corrosion is one of the most important means to reduce both maintenance costs and environmental impact. In the last years new studies on chemical baths compositions and fluxes have been performed in order to improve processes, corrosion resistance and mechanical behavior of Zn based coatings. Chemical bath composition is often improved by the Sn addition which increases the fluidity ofthe melt. Ti addition makes the coatings to change color under appropriate heat treatment. In this work a comparative microstructural analysis, in Zn-Sn and Zn-Ti coatings, is performed to evaluate intermetallic phases formation kinetics and the influence of intermetallic microstructure on coating damage under constant bending deformation
pearlitic ductile cast iron fatigue crack paths and damaging micromechanisms
Abstract The influence of the graphite nodules morphology (shape, dimension and distribution) on ductile cast irons (DCIs) mechanical properties is experimentally confirmed both in static, quasi static and cyclic loading conditions. According to the most recent results, these graphite elements cannot be merely considered as "microvoids embedded in a metal matrix", but their presence implies a modification of the damaging micromechanisms and this modification I s influenced by the metal matrix microstructure. In this works, the different damaging mechanisms that are active in the graphite nodules in a pearlitic DCI are semi-quantitatively analyzed using light optical microscope observations of the fracture surface profiles
Inferring DNA sequences from mechanical unzipping data: the large-bandwidth case
The complementary strands of DNA molecules can be separated when stretched
apart by a force; the unzipping signal is correlated to the base content of the
sequence but is affected by thermal and instrumental noise. We consider here
the ideal case where opening events are known to a very good time resolution
(very large bandwidth), and study how the sequence can be reconstructed from
the unzipping data. Our approach relies on the use of statistical Bayesian
inference and of Viterbi decoding algorithm. Performances are studied
numerically on Monte Carlo generated data, and analytically. We show how
multiple unzippings of the same molecule may be exploited to improve the
quality of the prediction, and calculate analytically the number of required
unzippings as a function of the bandwidth, the sequence content, the elasticity
parameters of the unzipped strands
Exponentially hard problems are sometimes polynomial, a large deviation analysis of search algorithms for the random Satisfiability problem, and its application to stop-and-restart resolutions
A large deviation analysis of the solving complexity of random
3-Satisfiability instances slightly below threshold is presented. While finding
a solution for such instances demands an exponential effort with high
probability, we show that an exponentially small fraction of resolutions
require a computation scaling linearly in the size of the instance only. This
exponentially small probability of easy resolutions is analytically calculated,
and the corresponding exponent shown to be smaller (in absolute value) than the
growth exponent of the typical resolution time. Our study therefore gives some
theoretical basis to heuristic stop-and-restart solving procedures, and
suggests a natural cut-off (the size of the instance) for the restart.Comment: Revtex file, 4 figure
Probing Low Energy Neutrino Backgrounds with Neutrino Capture on Beta Decaying Nuclei
We study the interaction of low energy neutrinos on nuclei that spontaneously
undergo beta decay showing that the product of the cross section times neutrino
velocity takes values as high as 10^{-42} cm^2 c for some specific nuclei that
decay via allowed transitions. The absence of energy threshold and the value of
the cross section single out these processes as a promising though very
demanding approach for future experiments aimed at a direct detection of low
energy neutrino backgrounds such as the cosmological relic neutrinos.Comment: Includes a discussion of local relic neutrino density effect on
neutrino capture rate. Accepted for publication in JCA
Structural transitions in a NiTi alloy: a multistage loading-unload cycle
NiTi shape memory alloys (SMAs) are increasingly used in many engineering and medical applications, because they combine special functional properties, such as shape memory effect and pseudoelasticity, with good mechanical strength and biocompatibility. However, the microstructural changes associated with these functional properties are not yet completely known. In this work a NiTi pseudo-elastic alloy was investigated by means of X-ray diffraction in order to assess micro-structural transformations under mechanical uniaxial deformation. The structure after complete shape recovery have been compared with initial state
GRB Observed by IBIS/PICsIT in the MeV Energy Range
We present the preliminary results of a systematic search for GRB and other
transients in the publicly available data for the IBIS/PICsIT (0.2-10 MeV)
detector on board INTEGRAL. Lightcurves in 2-8 energy bands with time
resolution from 1 to 62.5 ms have been collected and an analysis of spectral
and temporal characteristics has been performed. This is the nucleus of a
forthcoming first catalog of GRB observed by PICsIT.Comment: 6 pages, 3 figures. Poster presented at COSPAR 2008. Advaces in Space
Research, accepted for publicatio
Integranular corrosion susceptibility analysis in austeno-ferritic (duplex) stainless steels
Abstract: Austenitic-ferritic stainless steels combine the favorable properties of ferrite and austenite, showing both high mechanical properties and very good corrosion resistance. These steels are characterized by the precipitation of many secondary phases, carbides and nitrides for tempering temperatures between 200 and 1050°C. This phenomenon implies a high susceptibility to localized corrosion, however better than austenitic and ferritic grades. In this work, the susceptibility to intergranular corrosion in of two duplex stainless steel characterized by analogous ferrite/austenite volume fraction was investigated. A "standard" duplex stainless steel SAF 2205 and a "super" duplex stainless steel SAF 2507 were investigated by means of potentiostatic reactivations tests. In addition, chronoamperometric tests and light optical microscope observations of the specimens surfaces were performed in order to analyze the evolution of the corrosion morphologies
Overload effects on fatigue cracks in ferritic-pearlitic ductile cast irons
Abstract Matrix microstructure (e.g., phases volume fraction, grains size and grain distribution) and graphite nodules morphology peculiarities (e.g., nodularity level, dimension, distribution etc.) strongly affect the mechanical behavior and damaging micromechanisms in Ductile Cast Irons (DCIs). Concerning the influence of the graphite nodules, it depends both on the matrix microstructure and the loading conditions (e.g., static, quasi-static or cyclic loadings). The influence of graphite nodules on the damaging micromechanisms is not univocally identified. Some authors proposed to consider the graphite nodules as voids embedded in a more or less ductile matrix; other authors recently proposed a more complex contribution of the graphite nodules, suggesting a mechanical properties gradient inside the graphite nodules, with the graphite elements – matrix debonding as only one of the possible damaging micromechanisms. In this work, three different ferritic-pearlitic DCIs were investigated, focusing the damaging micromechanisms due to overloads applied on fatigue cracked Compact Type specimens. Scanning Electron Microscope (SEM) and Digital Microscope (DM) observations were performed on the lateral surfaces of the overloaded specimens following a step by step procedure: SEM observations were mainly focused on the damaging mechanisms in graphite nodules; DM observations were mainly focused on the damaging mechanisms in the ferritic-pearlitic matrix
- …