Mesoporous silica nanoparticles as carriers of active agents for smart anticorrosive organic coatings: a critical review

Mesoporous silica nanoparticles with properly designed textural properties and tailored release of corrosion inhibitors are highly efficient smart carriers for advanced anticorrosive nanocomposite coatings

Effects of biodegradable-based microplastics in Paracentrotus lividus Lmk embryos: Morphological and gene expression analysis

: Plastic pollution is a remarkable environmental issue. In fact, plastic is widespread in the lifetime and serious environmental problems are caused by the improper management of plastic end of life, being plastic litter detected in any environment. Efforts are put to implement the development of sustainable and circular materials. In this scenario, biodegradable polymers, BPs, are promising materials if correctly applied and managed at the end of life to minimize environmental problems. However, a lack of data on BPs fate and toxicity on marine organisms, limits their applicability. In this research, the impact of microplastics obtained from BPs, BMPs, were analyzed on Paracentrotus lividus. Microplastics were produced from five biodegradable polyesters at laboratory scale by milling the pristine polymers, under cryogenic conditions. Morphological analysis of P. lividus embryos exposed to polycaprolactone (PCL), polyhydroxy butyrate (PHB) and polylactic acid (PLA) showed their delay and malformations, which at molecular level are due to variation in expression levels of eighty-seven genes involved in various cellular processes, such as skeletogenesis, differentiation and development, stress, and detoxification response. Exposure to poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA) microplastics showed no detectable effects on P. lividus embryos. These findings contribute with important data on the effect of BPs on the physiology of marine invertebrates

Synthesis and characterization of nanocomposites based on PANI and carbon nanostructures prepared by electropolymerization

Nanocomposites based on polyaniline (PANI) and carbon nanostructures (CNSs) (graphene (G) and multiwall carbon nanotubes (MWCNTs)) were prepared by in situ electrochemical polymerization. CNSs were inserted into the PANI matrix by dispersing them into the electrolyte before the electropolymerization. Electrochemical characterization by means of cyclic voltammetry and steady state polarization were performed in order to determine conditions for electro- polymerization. Electro-polymerization of the PANI based nanocomposites was carried out at 0.75 V vs. saturated calomel electrode (SCE) for 40 and 60 minutes. The morphology and structural characteristics of the obtained nanocomposites were studied by scanning electron microscopy (SEM) and Raman spectroscopy, while thermal stability was determined using thermal gravimetric analysis (TGA). According to the morphological and structural study, fibrous and porous structure of PANI based nanocomposites was detected well embedding both G and MWCNTs. Also, strong interaction between quinoidal structure of PANI with carbon nanostructures via π–π stacking was detected by Raman spectroscopy. TGA showed the increased thermal stability of composites reinforced with CNSs, especially those reinforced with graphene

COST Action PRIORITY: An EU Perspective on Micro- and Nanoplastics as Global Issues

Plastic fragments, weathered into or released in the form of micro- and nanoplastics, are persistent and widespread in the environment, and it is anticipated that they have negative environmental impacts. This necessitates immediate efforts for management strategies throughout the entire plastics lifecycle. This opinion paper was initiated by the EU COST Action CA20101 PRIORITY, which focuses on the need to develop an effective global networking platform dealing with research, implementation, and consolidation of ways to address the worldwide challenges associated with micro- and nanoplastics pollution in the environment

Occurrence of potential plastic microfibers in mussels and anchovies sold for human consumption: Preliminary results

There is a global concern over the impact of microplastics on marine species and trophic webs. Microfibers commonly represent the greater portion of microplastics in the aquatic environment, but little is known about fiber uptake and accumulation by marine biota. The aim of the study was to investigate the potential plastic microfiber contamination in mussels (Mytilus galloprovincialis) and anchovies (Engraulis encrasicolus) from the Tyrrhenian Sea sold for human consumption. Anthropogenic debris was extracted from the digestive tracts of fish and the whole shellfish using a 10% KOH solution and quantified under a light microscope. The preliminary results showed the occurrence of potential plastic and natural microfibers in 73% of the samples. On average mussels contained 1.33 microfibers/g w.w. and 7.66 items/individual, while anchovies contained 9.06 microfibers/individual. Considering that mussels are consumed as a whole, and small pelagic fish, such as anchovy, may be eaten without removing the gastrointestinal tract, microfiber contamination may lead to human exposure. More research is required to adequately assess the risk that microplastics, including microfibers, may pose for food safety and human health

Effect of Microfibrillated Cellulose on Microstructure and Properties of Poly(vinyl alcohol) Foams

Poly(vinyl alcohol) foams, containing different amounts of microfibrillated cellulose, were prepared through an eco-friendly procedure based on high-speed mixing and freeze-drying. The effect of filler amount on cell shape and regularity was studied by scanning electron microscopy (SEM) and the evolution of the microstructure was assessed through dynamic cryo-SEM. Fourier Transformed Infrared Analysis and Differential Scanning Calorimetry measurements revealed the presence of hydrogen bond interaction among cellulosic filler and the matrix. The modulus and compression deflection of neat PVA were significantly improved by increasing the amount of microfibrillated cellulose content with respect to foams realised with pulp cellulose fibers

Biodegradation of Plastics Induced by Marine Organisms: Future Perspectives for Bioremediation Approaches

Plastic pollution is a distinctive element of the globalized world. In fact, since the 1970s the expansion and use of plastics, particularly in the consumer and commercial sectors, has given this material a permanent place in our lives. The increasing use of plastic products and the wrong management of end-of-life plastic products have contributed to increasing environmental pollution, with negative impacts on our ecosystems and the ecological functions of natural habitats. Nowadays, plastic pollution is pervasive in all environmental compartments. As aquatic environments are the dumping points for poorly managed plastics, biofouling and biodegradation have been proposed as promising approaches for plastic bioremediation. Known for the high stability of plastics in the marine environment, this represents a very important issue to preserve marine biodiversity. In this review, we have summarized the main cases reported in the literature on the degradation of plastics by bacteria, fungi, and microalgae and the degradation mechanisms involved, to highlight the potential of bioremediation approaches to reduce macro and microplastic pollution

Effectiveness of Mesoporous Silica Nanoparticles Functionalized with Benzoyl Chloride in pH-Responsive Anticorrosion Polymer Coatings

: Smart polymer coatings embedding stimuli-responsive corrosion inhibitor nanocarriers are commonly exploited, in the literature, for the development of high-performance active coatings. In this work, high-surface-area amino-functionalized mesoporous silica nanoparticles (MSN-NH2) were developed with a one-step synthesis process and then functionalized with benzoyl chloride (MSN-BC) through a reaction with amino groups. MSN-BC are able to release benzoic acid (BA) in acid and alkaline conditions as a result of the hydrolysis of the pH-sensitive amide bond. MSN-BC were embedded in polymer coatings to exploit the pH-dependent release of corrosion-inhibiting BA. After an in-depth characterization of the developed functional nanoparticles and of their pH-dependent release kinetics of BA, MSN-BC were embedded in an acrylic matrix, realizing coatings for the corrosion protection of aluminum AA2024 alloys. Results demonstrate the effectiveness of the nanoparticles' porous structure for a high loading of the anticorrosive active agent BA and the long-lasting efficiency of the coating for the corrosion protection of aluminum alloys, as validated by morphological and electrochemical impedance spectroscopy (EIS) measurements. EIS experiments were carried out with up to 21 days of exposure to a corrosive environment, revealing the potentialities of the acrylic coatings embedding MSN-BC for the protection of aluminum alloys

Research and characterization of fibrous microplastics and natural microfibers in pelagic and benthic fish species of commercial interest

The ingestion of synthetic microfibers, the most prevalent type of microplastics in marine environments, and natural fibers was assessed in Engraulis engrasicolus and Mullus barbatus, two commercially important fish species in the Mediterranean Sea. Microfibers were isolated from the fish gastrointestinal tract using a 10% potassium hydroxide solution. For the microfiber characterization, the evaluation of specific morphological features using a light microscope, coupled with the Fourier-transform infrared (FTIR) analysis of a subsample of isolated particles, was applied. The preliminary results showed the occurrence of microfibers in 53 and 60% of European anchovy and Red mullet, respectively. A mean of 6.9 microfibers/individual was detected in anchovies, while on average Red mullet samples contained 9.2 Microfibers/individual. The most common colors of fibers in both species were black, blue, and transparent. Visual characterization of fibers allowed the classification of 40% of the items as synthetic microfibers. FTIR spectroscopy confirmed the visual classification by fiber morphology. Microfibers were made of different typologies of polymers, represented by cellulose, cotton, and polyester. These findings confirm as the wide distribution of fibrous microplastics, and natural microfibers may impact both pelagic and deep-sea trophic webs. Despite the presence of microfibers in fish species poses a potential risk to human health, the literature is scarce regarding studies on the uptake by commercial marine fish mostly due to methodological issues. The visual characterization, corroborated by spectroscopic techniques, may be useful to differentiate synthetic and natural fibers, representing a fast and easy method to assess fibrous microplastic pollution in commercially important fish species