A comparative study of experimental configurations in synchrotron pair distribution function

The identification and quantification of amorphous components and nanocrystalline phases with very small crystal sizes, smaller than ~3 nm, within samples containing crystalline phases is very challenging. However, this is important as there are several types of systems that contain these matrices: building materials, glass-ceramics, some alloys, etc. The total scattering synchrotron pair distribution function (PDF) can be used to characterize the local atomic order of the nanocrystalline components and to carry out quantitative analyses in complex mixtures. Although the resolution in momentum transfer space has been widely discussed, the resolution in the interatomic distance space has not been discussed to the best of our knowledge. Here, we report synchrotron PDF data collected at three beamlines in different experimental configurations and X-ray detectors. We not only discuss the effect of the resolution in Q-space, Qmax ins of the recorded data and Qmax of the processed data, but we also discuss the resolution in the interatomic distance (real) space. A thorough study of single-phase crystalline nickel used as standard was carried out. Then, selected cement-related samples including anhydrous tricalcium and dicalcium silicates, and pastes derived from the hydration of tricalcium silicate and ye’elimite with bassanite were analyzed.This work is part of the PhD of Mr. Jesus D. Zea-Garcia. This work was supported by Spanish MINECO and FEDER [BIA2017-82391-R research project and I3 [IEDI-2016-0079] program]

Experimental Findings On Minor Actinide And Lanthanide Separations Using Ion Exchange

This project seeks to determine if inorganic or hybrid inorganic ion-exchange materials can be exploited to provide effective americium and curium separations. Specifically, we seek to understand the fundamental structural and chemical factors responsible for the selectivity of the tested ion-exchange materials for actinide and lanthanide ions. During FY13, experimental work focused in the following areas: (1) investigating methods to oxidize americium in dilute nitric acid with subsequent ion-exchange performance measurements of ion exchangers with the oxidized americium and (2) synthesis, characterization and testing of ion-exchange materials. Ion-exchange materials tested included alkali titanates, alkali titanosilicates, carbon nanotubes and group(IV) metal phosphonates. Americium oxidation testing sought to determine the influence that other redox active components may have on the oxidation of Am(III). Experimental findings indicated that Pu(IV) is oxidized to Pu(VI) by peroxydisulfate, but there are no indications that the presence of plutonium affects the rate or extent of americium oxidation at the concentrations of peroxydisulfate being used. Tests also explored the influence of nitrite on the oxidation of Am(III). Given the formation of Am(V) and Am(VI) in the presence of nitrite, it appears that nitrite is not a strong deterrent to the oxidation of Am(III), but may be limiting Am(VI) by quickly reducing Am(VI) to Am(V). Interestingly, additional absorbance peaks were observed in the UV-Vis spectra at 524 and 544 nm in both nitric acid and perchloric acid solutions when the peroxydisulfate was added as a solution. These peaks have not been previously observed and do not correspond to the expected peak locations for oxidized americium in solution. Additional studies are in progress to identify these unknown peaks. Three titanosilicate ion exchangers were synthesized using a microwave-accelerated reaction system (MARS�) and determined to have high affinities for lanthanide ions in dilute nitric acid. The K-TSP ion exchanger exhibited the highest affinity for lanthanides in dilute nitric acid solutions. The Ge-TSP ion exchanger shows promise as a material with high affinity, but additional tests are needed to confirm the preliminary results. On the other hand, carbon nanotubes and nitrogen-doped carbon nanotubes exhibited low, but measureable affinities for lanthanide ions in dilute nitric acid solutions (pH 3 and 6). The MWCNT exhibited much lower affinities than the K-TSP in dilute nitric acid solutions. However, the MWCNT are much more chemically stable in concentrated nitric acid solutions and, therefore, may be candidates for ion exchange in more concentrated nitric acid solutions

A Bow Shock Nebula Around a Compact X-Ray Source in the Supernova Remnant IC443

We present spectra and high resolution images of the hard X-ray feature along the southern edge of the supernova remnant IC443. Data from the Chandra X-ray Observatory reveal a comet-shaped nebula of hard emission, which contains a softer point source at its apex. We also present 20cm, 6cm, and 3.5cm images from the Very Large Array that clearly show the cometary nebula. Based on the radio and X-ray morphology and spectrum, and the radio polarization properties, we argue that this object is a synchrotron nebula powered by the compact source that is physically associated with IC443. The spectrum of the soft point source is adequately but not uniquely fit by a black body model (kT=0.71 +/- 0.08 keV, L=(6.5 +/- 0.9) * 10^31 erg/s). The cometary morphology of the nebula is the result of the supersonic motion of the neutron star (V_NS=250 +/- 50 km/s), which causes the relativistic wind of the pulsar to terminate in a bow shock and trail behind as a synchrotron tail. This velocity is consistent with an age of 30,000 years for the SNR and its associated neutron star.Comment: 9 pages, 5 figures, accepted for publication in the ApJ Letter

Strategic Design and Optimization of Inorganic Sorbents For Cesium, Strontium and Actinides

The basic science goal in this project identifies structure/affinity relationships for selected radionuclides and existing sorbents. The task will apply this knowledge to the design and synthesis of new sorbents that will exhibit increased affinity for cesium, strontium and actinide separations. The target problem focuses on the treatment of high-level nuclear wastes. The general approach can likewise be applied to nonradioactive separations

Hydrothermal synthesis and structural characterization of ammonium ion-templated lanthanide(III) carboxylate-phosphonates

Using N (phosphonomethyl)iminodiacetic acid (H4PMIDA), as a complexing agent, two new complexes, (NH4)La(PMIDA)(H2O)•H2O, 1 and (NH4)Yb(PMIDA), 2 have been synthesized hydrothermally. In both compounds, the metal ions are trapped in a three five-membered chelate rings by the chelating PMIDA anions giving a bi-capped trigonal prism LaO8N and capped trigonal prism YbO6N geometries for 1 and 2, respectively. The structure of 1 consists of La(PMIDA)(H2O) chelating units, linked together by the phosphonate oxygen atoms O1 and O3 to form a double chain along the c-axis. The double chains are then connected together by the bridging phosphonate oxygen O2 to form a 2D layered structure with alternating 4- and 8-membered apertures.The structure of 2 consists Yb(PMIDA) chelating units, which are connected by alternating bridging carboxylate and phosphonate groups along the [010] direction forming chains with a corrugated pattern. The third phosphonate oxygen bridges the chains together along the [001] direction to build the two-dimensional layer with 4 and 6 membered apertures in the bc plane. Under excitation of 330nm, compound 2 shows a broad emission band at λmax = 460nm, This emission is essentially in the blue luminescent region, which corresponds to ligand centered fluorescence

SYNTHESIS, AB INITIO STRUCTURE DETERMINATION, AND CHARACTERIZATION OF MANGANESE(III) PHENYL PHOSPHONATES

ABSTRACT , space group P1, and Z ϭ 2. The final agreement factors were R WP ϭ 12.8%, R P ϭ 9.1%, and R F ϭ 3.2%. There are 22 non-hydrogen atoms in the asymmetric part of the unit cell, and the positional parameters were refined with the help of soft constraints. The octahedral manganese coordination spheres are distorted due to the Jahn-Teller effect. The structure of this organic-inorganic compound is layered. The thermal behavior of Mn(HO 3 PC 6 H 5 )(O 3 PC 6 H 5 )⅐H 2 O was studied and its thermal decomposition product was identified. © 1998 Elsevier Science Lt

Development of Improved Sorbents for Radiochemical Separations at the SRS

High-level nuclear waste produced from fuel reprocessing operations at the Savannah River Site (SRS) requires pretreatment to remove {sup 137}Cs, {sup 90}Sr and alpha-emitting radionuclides (i.e., actinides) prior to disposal. Separation processes planned at SRS include caustic side solvent extraction, for {sup 137}Cs removal, and ion exchange/sorption of {sup 90}Sr and alpha-emitting radionuclides with monosodium titanate (MST). The predominant alpha-emitting radionuclides in the highly alkaline waste solutions include plutonium isotopes {sup 238}Pu, {sup 239}Pu and {sup 240}Pu. This paper describes results from a project to produce sorbents that exhibit increased removal kinetics and capacity for {sup 90}Sr and alpha-emitting radionuclides versus that of the baseline MST material. Testing indicated that MST samples prepared in the presence of organic-based templating agents showed limited improvements in performance compared to the baseline MST. We observed significantly improved plutonium and neptunium removal performance with MST samples prepared upon the addition of a proprietary reagent. The modified MST offers the possibility of increased throughput and reduced solids handling in waste processing facilities at the SRS

Alkaline-earth phosphonate MOFs with reversible hydration-dependent fluorescence

A new rigid tritopic phosphonic ligand, 2,4,6-tris(4-phosphonophenyl)pyridine (H6L), was synthesized and used to assemble isostructural barium (1) and strontium (2) phosphonate metal organic frameworks that exhibit fully reversible and selective water-dependent fluorescence red-shift at room temperature

Exploration in the service of prospective control

Abstract We propose a sequential process of exploration that can account for perception-action coupling in infant locomotion. Each phase in the sequence is a process of obtaining progressively more information leading to a motor decision-exploration from a distance, exploration via direct contact, and exploration of alternative means. Quick glances and prolonged looking from afar serve to alert the perceiver to important changes in the terrain. Intentional touching and testing alternative ways to traverse an obstacle are only prompted when prior information indicates a potential threat to balance. We further propose that depth information is privileged because it can be detected from a distance more readily than other surface properties such as rigidity and friction. Studies of infants walking down slopes and across "hole/patch" transitions illustrate the important role of exploration in prospective control of locomotion

Promoting Effect of Layered Titanium Phosphate on the Electrochemical and Photovoltaic Performance of Dye-Sensitized Solar Cells

We reported a composite electrolyte prepared by incorporating layered α-titanium phosphate (α-TiP) into an iodide-based electrolyte using 1-ethyl-3-methylimidazolium tetrafluoroborate(EmimBF4) ionic liquid as solvent. The obtained composite electrolyte exhibited excellent electrochemical and photovoltaic properties compared to pure ionic liquid electrolyte. Both the diffusion coefficient of triiodide (I3−) in the electrolyte and the charge-transfer reaction at the electrode/electrolyte interface were improved markedly. The mechanism for the enhanced electrochemical properties of the composite electrolyte was discussed. The highest conversion efficiency of dye-sensitized solar cell (DSSC) was obtained for the composite electrolyte containing 1wt% α-TiP, with an improvement of 58% in the conversion efficiency than the blank one, which offered a broad prospect for the fabrication of stable DSSCs with a high conversion efficiency