Evolution of iron carbides during tempering of low-alloy tool steel studied with polarized small angle neutron scattering, electron microscopy and atom probe

The magnetic scattering of iron carbides in low-alloy tool steel was investigated ex-situ by polarized small angle neutron scattering measurements after tempering the steel at 550 \ub0C and 600 \ub0C. Magnetic features could be detected in the as-quenched sample resulting in a negative interference term, believed to be either θ-Fe3C, η-Fe2C, or ε-Fe2-3C. During tempering the evolution of cementite could be studied by the variation of the interference term and in γ-ratio, which is the ratio of the magnetic to nuclear scattering length density contrast. From scanning transmission electron microscopy (STEM) and atom probe tomography, it is evident that cementite (θ-Fe3C) is present directly when reaching the tempering temperature of either 550 \ub0C or 600 \ub0C. At longer tempering times, cementite gets enriched with substitutional elements like chromium and manganese, forming an enriched shell on the cementite particles. STEM and energy dispersive x-ray spectrometry show that the chemical composition of small cementite particles approaches that of Cr-rich M7C3 carbides after 24 h at 600 \ub0C. It is also seen that small non-magnetic particles precipitate during tempering and these correspond well with molybdenum and vanadium-rich carbides

Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe

Two industrially processed low-alloyed martensitic tool steel alloys with compositions Fe-0.3C-1.1Si-0.81Mn-1.5Cr-1.4Ni-1.1Mo-0.13V and Fe-0.3C-1.1Si-0.81Mn-1.4Cr-0.7Ni-0.8Mo-0.14V (wt.%) were characterized using small-angle neutron scattering (SANS), scanning electron microscopy (SEM), Scanning transmission electron microscopy (STEM), and atom probe tomography (APT). The combination of methods enables an understanding of the complex precipitation sequences that occur in these materials during the processing. Nb-rich primary carbides form at hot working, while Fe-rich auto-tempering carbides precipitate upon quenching, and cementite carbides grow during tempering when Mo-rich secondary carbides also nucleate and grow. The number density of Mo-rich carbides increases with tempering time, and after 24 h, it is two to three orders of magnitude higher than the Fe-rich carbides. A high number density of Mo-rich carbides is important to strengthen these low-alloyed tool steels through precipitation hardening. The results indicate that the Mo-rich secondary carbide precipitates are initially of MC character, whilst later they start to appear as M2C. This change of the secondary carbides is diffusion driven and is therefore mainly seen for longer tempering times at the higher tempering temperature of 600◦C

Modeling and simulation of temperature variation in bearings In a hydro electric power generating unit

Hydroelectric power contributes around 20% to the world electricity supply and is considered as the most important, clean, emission free and an economical renewable energy source. Hydro electric power plants operating all over the world has been built in the 20th century in many countries and running at a higher plant-factor. This is achieved by minimizing the failures and operating the plants continuously for a longer period at a higher load. However, continuous operation of old plants have constrained with the failures due to bearing overheating. The aim of this research is to model and simulate the dynamic variation of temperatures of bearing temperature of a hydro electric generating unit. Multi-input, multi-output (MIMO) system with complex nonlinear characteristics of this nature is difficult to model using conventional modeling methods. Hence, in this research neural network (NN) technique has been used for modeling the system

Pro-inflammatory flagellin proteins of prevalent motile commensal bacteria are variably abundant in the intestinal microbiome of elderly humans

Peer reviewedPublisher PD

Scandinavian clinical practice guideline on fluid and drug therapy in adults with acute respiratory distress syndrome.

To access publisher's full text version of this article, please click on the hyperlink in Additional Links field or click on the hyperlink at the top of the page marked Files. This article is open access.The objective of the Scandinavian Society of Anaesthesiology and Intensive Care Medicine (SSAI) task force on fluid and drug therapy in adults with acute respiratory distress syndrome (ARDS) was to provide clinically relevant, evidence-based treatment recommendations according to standards for trustworthy guidelines.The guideline was developed according to standards for trustworthy guidelines, including a systematic review of the literature and use of the GRADE methodology for assessment of the quality of evidence and for moving from evidence to recommendations.A total of seven ARDS interventions were assessed. We suggest fluid restriction in patients with ARDS (weak recommendation, moderate quality evidence). Also, we suggest early use of neuromuscular blocking agents (NMBAs) in patients with severe ARDS (weak recommendation, moderate quality evidence). We recommend against the routine use of other drugs, including corticosteroids, beta2 agonists, statins, and inhaled nitric oxide (iNO) or prostanoids in adults with ARDS (strong recommendations: low- to high-quality evidence). These recommendations do not preclude the use of any drug or combination of drugs targeting underlying or co-existing disorders.This guideline emphasizes the paucity of evidence of benefit - and potential for harm - of common interventions in adults with ARDS and highlights the need for prudence when considering use of non-licensed interventions in this patient population.Scandinavian Society of Anaesthesiology and Intensive Care Medicine (SSAI

Pathways and Management of Phosphorus in urban areas

Due to the finite nature of mineral phosphorus reserves, effective management of anthropogenic phosphorus flows is currently under investigation by the international research community. This article emphasizes the importance of urban phosphorus flows, which are often marginalized due to the greater magnitude of agricultural phosphorus flows. A study on phosphorus flows in Gothenburg, Sweden, points out the potential role of solid waste in nutrient management, as the amounts of phosphorus in solid waste and in wastewater were found to be equal. Importation of food commodities accounts for 50% of the total inflow of phosphorus, and food waste is a major contributor of phosphorus to solid waste. The results suggest that solid waste incineration residues represent a large underestimated sink of phosphorus. Focusing on wastewater as the sole source of recovered phosphorus is not sufficient. The Swedish national goal on phosphorus recycling, which is limited to sewage sludge, targets only a part of the total phosphorus flow that can potentially be recovered. In contrast to previous studies, agricultural flows in Gothenburg were marginal compared to flows related to the urban waste management infrastructure. We emphasize the need for debate on preferable routes for disposal of waste with a high phosphorus content. Both recovery potential and usefulness of the recovered product for agricultural purposes have to be considered. Impacts of five waste management strategies on phosphorus flows were evaluated: incineration of all the waste, comprehensive food waste separation, installation of kitchen grinders, urine diversion, and separation of blackwater and food waste

Substrate-bound outward-open structure of a Na+-coupled sialic acid symporter reveals a new Na+ site

Many pathogenic bacteria utilise sialic acids as an energy source or use them as an external coating to evade immune detection. As such, bacteria that colonise sialylated environments deploy specific transporters to mediate import of scavenged sialic acids. Here, we report a substrate-bound 1.95 Å resolution structure and subsequent characterisation of SiaT, a sialic acid transporter from Proteus mirabilis. SiaT is a secondary active transporter of the sodium solute symporter (SSS) family, which use Na+ gradients to drive the uptake of extracellular substrates. SiaT adopts the LeuT-fold and is in an outward-open conformation in complex with the sialic acid N-acetylneuraminic acid and two Na+ ions. One Na+ binds to the conserved Na2 site, while the second Na+ binds to a new position, termed Na3, which is conserved in many SSS family members. Functional and molecular dynamics studies validate the substrate-binding site and demonstrate that both Na+ sites regulate N-acetylneuraminic acid transport

Ligand-Receptor Interactions

The formation and dissociation of specific noncovalent interactions between a variety of macromolecules play a crucial role in the function of biological systems. During the last few years, three main lines of research led to a dramatic improvement of our understanding of these important phenomena. First, combination of genetic engineering and X ray cristallography made available a simultaneous knowledg of the precise structure and affinity of series or related ligand-receptor systems differing by a few well-defined atoms. Second, improvement of computer power and simulation techniques allowed extended exploration of the interaction of realistic macromolecules. Third, simultaneous development of a variety of techniques based on atomic force microscopy, hydrodynamic flow, biomembrane probes, optical tweezers, magnetic fields or flexible transducers yielded direct experimental information of the behavior of single ligand receptor bonds. At the same time, investigation of well defined cellular models raised the interest of biologists to the kinetic and mechanical properties of cell membrane receptors. The aim of this review is to give a description of these advances that benefitted from a largely multidisciplinar approach