150 research outputs found
On modeling and measuring viscoelasticity with dynamic Atomic Force Microscopy
The interaction between a rapidly oscillating atomic force microscope tip and
a soft material surface is described using both elastic and viscous forces with
a moving surface model. We derive the simplest form of this model, motivating
it as a way to capture the impact dynamics of the tip and sample with an
interaction consisting of two components: interfacial or surface force, and
bulk or volumetric force. Analytic solutions to the piece-wise linear model
identify characteristic time constants, providing a physical explanation of the
hysteresis observed in the measured dynamic force quadrature curves. Numerical
simulation is used to fit the model to experimental data and excellent
agreement is found with a variety of different samples. The model parameters
form a dimensionless impact-rheology factor, giving a quantitative physical
number to characterize a viscoelastic surface that does not depend on the tip
shape or cantilever frequency.Comment: 13 pages, 7 figure
Microstructure of chemically modified wood using X-ray computed tomography in relation to wetting properties
X-ray computed tomography (XCT) was utilized to visualize and quantify the 2D and 3D microstructure of acetylated southern yellow pine (pine) and maple, as well as furfurylated pine samples. The total porosity and the porosity of different cell types, as well as cell wall thickness and maximum opening of tracheid lumens were evaluated. The wetting properties (swelling and capillary uptake) were related to these microstructural characteristics. The data show significant changes in the wood structure for furfurylated pine sapwood samples, including a change in tracheid shape and filling of tracheids by furan polymer. In contrast, no such changes were noted for the acetylated pine samples at the high resolution of 0.8 mu m. The XCT images obtained for the furfurylated maple samples demonstrated that all ray cells and some vessel elements were filled with furan polymer while the fibers largely remained unchanged. Furfurylation significantly decreased the total porosity of both the maple and pine samples. Furthermore, this was observed in both earlywood (EW) and latewood (LW) regions in the pine samples. In contrast, the total porosity of pine samples was hardly affected by acetylation. These findings are in line with wetting results demonstrating that furfurylation reduces both swelling and capillary uptake in contrast to acetylation which reduces mostly swelling. Furfurylation significantly increased the cell wall thickness of both the maple and pine samples, especially at higher levels of furfurylation
Effect of solvent quality and chain density on normal and frictional forces between electrostatically anchored thermoresponsive diblock copolymer layers
Equilibration in adsorbing polymer systems can be very slow, leading to different physical properties at a given condition depending on the pathway that was used to reach this state. Here we explore this phenomenon using a diblock copolymer consisting of a cationic anchor block and a thermoresponsive block of poly(2-isopropyl-2-oxazoline), PIPOZ. We find that at a given temperature different polymer chain densities at the silica surface are achieved depending on the previous temperature history. We explore how this affects surface and friction forces between such layers using the atomic force microscope colloidal probe technique. The surface forces are purely repulsive at temperaturesPeer reviewe
Thermoresponsive Pentablock Copolymer on Silica : Temperature Effects on Adsorption, Surface Forces, and Friction
The adsorption of hydrophilic or amphiphilic multiblock copolymers provides a powerful means to produce well-defined "smart" surfaces, especially if one or several blocks are sensitive to external stimuli. We focus here on an A-B-A-B-A copolymer, where A is a cationic poly((3acrylamido-propyl)-trimethylammonium chloride) (PAMPTMA) block containing 15 (end blocks) or 30 (middle block) repeat units and B is a neutral thermosensitive water-soluble poly(2-isopropyl-2-oxazoline) (PIPOZ) block with 50 repeat units. X-ray reflectivity and quartz crystal microbalance with dissipation monitoring were employed to study the adsorption of PAMPTMA(15)-PAMPTMA(30)-PIPOZ(50)-PAMPTMA(15) on silica surfaces. The latter technique was employed at different temperatures up to 50 degrees C. Surface forces and friction between the two silica surfaces across aqueous pentablock copolymer solutions at different temperatures were determined with the atomic force microscopy colloidal probe force and friction measurements. The cationic pentablock copolymer was found to have a high affinity to the negatively charged silica surface, leading to a thin (2 nm) and rigid adsorbed layer. A steric force was encountered at a separation of around 3 nm from hard wall contact. A capillary condensation of a polymer-rich phase was observed at the cloud point of the solution. The friction forces were evaluated using Amontons' rule modified with an adhesion term.Peer reviewe
Polymersomes at the solid-liquid interface:Dynamic morphological transformation and lubrication
Polymersomes are hollow spheres self-assembled from amphiphilic block copolymers of certain molecular architecture. Whilst they have been widely studied for biomedical applications, relatively few studies have reported their interfacial properties. In particular, lubrication by polymersomes has not been previously reported. Here, interfacial properties of polymersomes self-assembled from poly(butadiene)-poly(ethylene oxide) (PBD-PEO; molecular weight 10,400 g mol−1) have been studied at both hydrophilic and hydrophobic surfaces. Their morphology at silica and mica surfaces was imaged with quantitative nanomechanical property mapping atomic force microscopy (QNM AFM), and friction and surface forces they mediate under confinement between two surfaces were studied using colloidal probe AFM (CP-AFM). We find that the polymersomes remained intact but adopted flattened conformation once adsorbed to mica, with a relatively low coverage. However, on silica these polymersomes were unstable, rupturing to form donut shaped residues or patchy bilayers. On a silica surface hydrophobized with a 19 nm polystyrene (PS) film, the polymer vesicles formed a more stable layer with a higher surface coverage as compared to the hydrophilic surface, and the interfacial structure also evolved over time. Moreover, friction was greatly reduced on hydrophobized silica surfaces in the presence of polymersomes, suggesting their potential as effective aqueous lubricants.</p
Lubrication synergy: Mixture of hyaluronan and dipalmitoylphosphatidylcholine (DPPC) vesicles
AbstractPhospholipids and hyaluronan have been implied to fulfil important roles in synovial joint lubrication. Since both components are present in synovial fluid, self-assembly structures formed by them should also be present. We demonstrate by small angle X-ray scattering that hyaluronan associates with the outer shell of dipalmitoylphophatidylcholine (DPPC) vesicles in bulk solution. Further, we follow adsorption to silica from mixed hyaluronan/DPPC vesicle solution by Quartz Crystal Microbalance with Dissipation measurements. Atomic Force Microscope imaging visualises the adsorbed layer structure consisting of non-homogeneous phospholipid bilayer with hyaluronan/DPPC aggregates on top. The presence of these aggregates generates a long-range repulsive surface force as two such surfaces are brought together. However, the aggregates are easily deformed, partly rearranged into multilayer structures and partly removed from between the surfaces under high loads. These layers offer very low friction coefficient (<0.01), high load bearing capacity (≈23MPa), and self-healing ability. Surface bound DPPC/hyaluronan aggregates provide a means for accumulation of lubricating DPPC molecules on sliding surfaces
Comparison of Manual Cross-Sectional Measurements and Automatic Volumetry of the Corpus Callosum, and Their Clinical Impact: A Study on Type 1 Diabetes and Healthy Controls
Background and purpose: Degenerative change of the corpus callosum might serve as a clinically useful surrogate marker for net pathological cerebral impact of diabetes type 1. We compared manual and automatic measurements of the corpus callosum, as well as differences in callosal cross-sectional area between subjects with type 1 diabetes and healthy controls. Materials and methods: This is a cross-sectional study on 188 neurologically asymptomatic participants with type 1 diabetes and 30 healthy age- and sex-matched control subjects, recruited as part of the Finnish Diabetic Nephropathy Study. All participants underwent clinical work-up and brain MRI. Callosal area was manually measured and callosal volume quantified with FreeSurfer. The measures were normalized using manually measured mid-sagittal intracranial area and volumetric intracranial volume, respectively. Results: Manual and automatic measurements correlated well (callosal area vs. volume: rho = 0.83, p <0.001 and mid-sagittal area vs. intracranial volume: rho = 0.82, p <0.001). We found no significant differences in the callosal measures between cases and controls. In type 1 diabetes, the lowest quartile of normalized callosal area was associated with higher insulin doses (p = 0.029) and reduced insulin sensitivity (p = 0.033). In addition, participants with more than two cerebral microbleeds had smaller callosal area (p = 0.002). Conclusion: Manually measured callosal area and automatically segmented are interchangeable. The association seen between callosal size with cerebral microbleeds and insulin resistance is indicative of small vessel disease pathology in diabetes type 1.Peer reviewe
Albumin-hyaluronan interactions : influence of ionic composition probed by molecular dynamics
The lubrication mechanism in synovial fluid and joints is not yet fully understood. Nevertheless,
intermolecular interactions between various neutral and ionic species including large
macromolecular systems and simple inorganic ions are the key to understanding the excellent lubrication
performance. An important tool for characterizing the intermolecular forces and their
structural consequences is molecular dynamics. Albumin is one of the major components in synovial
fluid. Its electrostatic properties, including the ability to form molecular complexes, are closely
related to pH, solvation, and the presence of ions. In the context of synovial fluid, it is relevant to
describe the possible interactions between albumin and hyaluronate, taking into account solution
composition effects. In this study, the influence of Na+, Mg2+, and Ca2+ ions on human serum
albumin–hyaluronan interactions were examined using molecular dynamics tools. It was established
that the presence of divalent cations, and especially Ca2+, contributes mostly to the increase of
the affinity between hyaluronan and albumin, which is associated with charge compensation in
negatively charged hyaluronan and albumin. Furthermore, the most probable binding sites were
structurally and energetically characterized. The indicated moieties exhibit a locally positive charge
which enables hyaluronate binding (direct and water mediated)
Influence of the molecular weight and the presence of calcium ions on the molecular interaction of hyaluronan and DPPC
Hyaluronan is an essential physiological bio macromolecule with di erent functions.
One prominent area is the synovial fluid which exhibits remarkable lubrication properties. However,
the synovial fluid is a multi-component system where di erent macromolecules interact in a synergetic
fashion. Within this study we focus on the interaction of hyaluronan and phospholipids, which are
thought to play a key role for lubrication. We investigate how the interactions and the association
structures formed by hyaluronan (HA) and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)
are influenced by the molecular weight of the bio polymer and the ionic composition of the solution.
We combine techniques allowing us to investigate the phase behavior of lipids (di erential scanning
calorimetry, zeta potential and electrophoretic mobility) with structural investigation (dynamic light
scattering, small angle scattering) and theoretical simulations (molecular dynamics). The interaction
of hyaluronan and phospholipids depends on the molecular weight, where hyaluronan with lower
molecular weight has the strongest interaction. Furthermore, the interaction is increased by the
presence of calcium ions. Our simulations show that calcium ions are located close to the carboxylate
groups of HA and, by this, reduce the number of formed hydrogen bonds between HA and DPPC.
The observed change in the DPPC phase behavior can be attributed to a local charge inversion
by calcium ions binding to the carboxylate groups as the binding distribution of hyaluronan and
1,2-dipalmitoyl-sn-glycero-3-phosphocholine is not changed
- …