212 research outputs found
MULTI OPTICAL TRANSITION RADIATION SYSTEM FOR ATF2 ∗
In this paper we describe the design, installation and first calibration tests of a Multi Optical Transition Radiation System in the beam diagnostic section of the Extraction (EXT) line of ATF2, close to the multi wire scanner system. This system will be a valuable tool for measuring beam sizes and emittances coming from the ATF Damping Ring. With an optical resolution of about 2μm an original OTR design (OTR1X) located after the septum at the entrance of the EXT line demonstrated the ability to measure a5.5μm beam size in one beam pulse and to take many fast measurements. This gives the OTR the ability to measure the beam emittance with high statistics, giving a low error and a good understanding of emittance jitter. Furthermore the nearby wire scanners will be a definitive test of the OTR as a beam emittance diagnostic device. The multi-OTR system design proposed here is based on the existing OTR1X
Twisted One-Dimensional Charge Transfer and Related Y-Shaped Chromophores with a 4 H-Pyranylidene Donor: Synthesis and Optical Properties
Three series of push-pull derivatives bearing 4H-pyranylidene as electron donor group and a variety of acceptors were designed. On one hand, one-dimensional chromophores with a thiophene ring (series 1H) or 5-dimethylaminothiophene moiety (series 1N) as an auxiliary donor, non-coplanar with the p-conjugated system, were synthesized. On the other hand, related two-dimensional (2D) Y-shaped chromophores (series 2) were also prepared to compare how the diverse architectures affect the electrochemical, linear, and second-order nonlinear optical (NLO) properties. The presence of the 5-dimethylaminothiophene moiety in the exocyclic C= C bond of the pyranylidene unit gives rise to oxidation potentials rarely low, and the protonation (with an excess of trifluoroacetic acid) of its derivatives results in the apparition of a new blue-shifted band in the UV-visible spectra. The analysis of the properties of derivatives with and without the additional thiophene ring shows that this auxiliary donor leads to a higher NLO response, accompanied by an enhanced transparency. Y-shaped chromophores of series 2 present a blue-shifted absorption, higher molar extinction coefficients, and higher Eox values compared to their linear twisted counterparts. As concerns NLO properties, 2D Y-shaped architecture gives rise to somewhat lower µß values (except for thiobarbiturate derivatives)
ATLAS silicon module assembly and qualification tests at IFIC Valencia
ATLAS experiment, designed to probe the interactions of particles emerging
out of proton proton collisions at energies of up to 14 TeV, will assume
operation at the Large Hadron Collider (LHC) at CERN in 2007. This paper
discusses the assembly and the quality control tests of forward detector
modules for the ATLAS silicon microstrip detector assembled at the Instituto de
Fisica Corpuscular (IFIC) in Valencia. The construction and testing procedures
are outlined and the laboratory equipment is briefly described. Emphasis is
given on the module quality achieved in terms of mechanical and electrical
stability.Comment: 23 pages, 38 EPS figures, uses JINST LaTeX clas
Forward SCT Module Assembly and Quality Control at IFIC Valencia
This note discusses the assembly and the quality control tests of 282 forward detector modules for the ATLAS Semiconductor Tracker assembled at the Instituto de Fisica Corpuscular (IFIC) in Valencia. The construction and testing procedures are outlined and the laboratory equipment is briefly described. Emphasis is given on the module quality achieved in terms of mechanical and electrical stability
The ATLAS SCT grounding and shielding concept and implementation
This paper presents a complete description of Virgo, the French-Italian gravitational wave detector. The detector, built at Cascina, near Pisa (Italy), is a very large Michelson interferometer, with 3 km-long arms. In this paper, following a presentation of the physics requirements, leading to the specifications for the construction of the detector, a detailed description of all its different elements is given. These include civil engineering infrastructures, a huge ultra-high vacuum (UHV) chamber (about 6000 cubic metres), all of the optical components, including high quality mirrors and their seismic isolating suspensions, all of the electronics required to control the interferometer and for signal detection. The expected performances of these different elements are given, leading to an overall sensitivity curve as a function of the incoming gravitational wave frequency. This description represents the detector as built and used in the first data-taking runs. Improvements in different parts have been and continue to be performed, leading to better sensitivities. These will be detailed in a forthcoming paper
A double-sided, shield-less stave prototype for the ATLAS upgrade strip tracker for the high luminosity LHC
A detailed description of the integration structures for the barrel region of the silicon strips tracker of the ATLAS Phase-II upgrade for the upgrade of the Large Hadron Collider, the so-called High Luminosity LHC (HL-LHC), is presented. This paper focuses on one of the latest demonstrator prototypes recently assembled, with numerous unique features. It consists of a shortened, shield-less, and double sided stave, with two candidate power distributions implemented. Thermal and electrical performances of the prototype are presented, as well as a description of the assembly procedures and tools
A double-sided silicon micro-strip super-module for the ATLAS inner detector upgrade in the high-luminosity LHC
The ATLAS experiment is a general purpose detector aiming to fully exploit the discovery potential of the Large Hadron Collider (LHC) at CERN. It is foreseen that after several years of successful data-taking, the LHC physics programme will be extended in the so-called High-Luminosity LHC, where the instantaneous luminosity will be increased up to 5 × 1034 cm−2 s−1. For ATLAS, an upgrade scenario will imply the complete replacement of its internal tracker, as the existing detector will not provide the required performance due to the cumulated radiation damage and the increase in the detector occupancy. The current baseline layout for the new ATLAS tracker is an all-silicon-based detector, with pixel sensors in the inner layers and silicon micro-strip detectors at intermediate and outer radii. The super-module is an integration concept proposed for the strip region of the future ATLAS tracker, where double-sided stereo silicon micro-strip modules are assembled into a low-mass local support structure. An electrical super-module prototype for eight double-sided strip modules has been constructed. The aim is to exercise the multi-module readout chain and to investigate the noise performance of such a system. In this paper, the main components of the current super-module prototype are described and its electrical performance is presented in detail
- …