4,268 research outputs found

    Landing gear energy absorption system

    Get PDF
    A landing pad system is described for absorbing horizontal and vertical impact forces upon engagement with a landing surface where circumferentially arranged landing struts respectively have a clevis which receives a slidable rod member and where the upper portion of a slidable rod member is coupled to the clevis by friction washers which are force fit onto the rod member to provide for controlled constant force energy absorption when the rod member moves relative to the clevis. The lower end of the friction rod is pivotally attached by a ball and socket to a support plate where the support plate is arranged to slide in a transverse direction relative to a housing which contains an energy absorption material for absorbing energy in a transverse direction

    Vacuum-Assisted, Constant-Force Exercise Device

    Get PDF
    The vacuum-assisted, constant-force exercise device (VAC-FED) has been proposed to fill a need for a safe, reliable exercise machine that would provide constant loads that could range from 20 to 250 lb (0.09 to 1.12 kN) with strokes that could range from 6 to 36 in. (0.15 to 0.91 m). The VAC-FED was originally intended to enable astronauts in microgravity to simulate the lifting of free weights, but it could just as well be used on Earth for simulated weight lifting and other constant-force exercises. Because the VAC-FED would utilize atmospheric/vacuum differential pressure instead of weights to generate force, it could weigh considerably less than either a set of free weights or a typical conventional exercise machine based on weights. Also, the use of atmospheric/ vacuum differential pressure to generate force would render the VAC-FED inherently safer, relative to free weights and to conventional exercise machines that utilize springs to generate forces. The overall function of the VAC-FED would be to generate a constant tensile force in an output cable, which would be attached to a bar, handle, or other exercise interface. The primary force generator in the VAC-FED would be a piston in a cylinder. The piston would separate a volume vented to atmosphere at one end of the cylinder from an evacuated volume at the other end of the cylinder (see figure). Hence, neglecting friction at the piston seals, the force generated would be nearly constant equal to the area of the piston multiplied by the atmospheric/vacuum differential pressure. In the vented volume in the cylinder, a direct-force cable would be looped around a pulley on the piston, doubling the stroke and halving the tension. One end of the direct-force cable would be anchored to a cylinder cap; the other end of the direct-force cable would be wrapped around a variable-ratio pulley that would couple tension to the output cable. As its name suggests, the variable-ratio pulley would contain a mechanism that could be used to vary the ratio between the tension in the direct-force cable and the tension in the output cable. This mechanism could contain gears, pulleys, and/or levers, for example

    Two-dimensional colloidal fluids exhibiting pattern formation

    Get PDF
    Fluids with competing short range attraction and long range repulsive interactions between the particles can exhibit a variety of microphase separated structures. We develop a lattice-gas (generalised Ising) model and analyse the phase diagram using Monte Carlo computer simulations and also with density functional theory (DFT). The DFT predictions for the structures formed are in good agreement with the results from the simulations, which occur in the portion of the phase diagram where the theory predicts the uniform fluid to be linearly unstable. However, the mean-field DFT does not correctly describe the transitions between the different morphologies, which the simulations show to be analogous to micelle formation. We determine how the heat capacity varies as the model parameters are changed. There are peaks in the heat capacity at state points where the morphology changes occur. We also map the lattice model onto a continuum DFT that facilitates a simplification of the stability analysis of the uniform fluid.Comment: 13 pages, 15 figure

    HST Images and Spectra of the Remnant of SN 1885 in M31

    Get PDF
    Near UV HST images of the remnant of SN 1885 (S And) in M31 show a 0"70 +- 0"05 diameter absorption disk silhouetted against M31's central bulge, at SN 1885's historically reported position. The disk's size corresponds to a linear diameter of 2.5 +- 0.4 pc at a distance of 725 +- 70 kpc, implying an average expansion velocity of 11000 +- 2000 km/s over 110 years. Low-dispersion FOS spectra over 3200-4800 A; reveal that the absorption arises principally from Ca II H & K (equivalent width ~215 A;) with weaker absorption features of Ca I 4227 A; and Fe I 3720 A;. The flux at Ca II line center indicates a foreground starlight fraction of 0.21, which places SNR 1885 some 64 pc to the near side of the midpoint of the M31 bulge, comparable to its projected 55 pc distance from the nucleus. The absorption line profiles suggest an approximately spherically symmetric, bell-shaped density distribution of supernova ejecta freely expanding at up to 13100 +- 1500 km/s. We estimate Ca I, Ca II, and Fe I masses of 2.9(+2.4,-0.6) x 10^-4 M_o, 0.005(+0.016,-0.002) M_o, and 0.013(+0.010,-0.005) M_o respectively. If the ionization state of iron is similar to the observed ionization state of calcium, M_CaII/M_CaI = 16(+42,-5), then the mass of Fe II is 0.21(+0.74,-0.08) M_o, consistent with that expected for either normal or subluminous SN Ia.Comment: 8 pages, including 4 embedded EPS figures, emulateapj.sty style file. Color image at http://casa.colorado.edu/~mcl/sand.shtml . Submitted to Ap

    Management of Groundwater Recharge Areas in the Mouth of Weber Canyon

    Get PDF
    Proper management of surface and groundwater resources is important for their prolonged and a beneficial use. Within the Weber Delta area there has existed a continual decline in the piezometric surface of the deep confined aquifer over the last 40 years. This decline ranges from approximately 20 feet along the eastern shore of the Great Salt Lake to 50 feet along in the vicinity of Hill Air Force Base. Declines in the piezometric surface are undesirable because of the increased well installation costs, increased pumping costs, decreased aquifer storage, increased risk of salt water intrusion, and the possibility of land subsidence. Declines in the piezometric surface can be prevented or reduced by utilizing artificial groundwater recharge. The purpose of this study was to develop and operate a basin groundwater model with stochastic recharge inputs to determine the feasibility of utilizing available Weber River water for the improvement of the groundwater availability. This was accomplished by preparing auxiliary computer models which generated statistically similar river flows from which river water rights were subtracted. The feasibility of utilizing this type of recharge input was examined by comparing the economic benefit gained by reducing area wide pumping lifts through artificial recharge with the costs of the recharge operations. Institutions for implementing a recharge program were examined. Through this process a greater understanding of the geohydrologic conditions of the area was obtained. Piezometric surface contour maps, geologic profiles, calibrated values for geologic and hydrologic variables, as well as system response to change were quantified

    A New Test of the Statistical Nature of the Brightest Cluster Galaxies

    Full text link
    A novel statistic is proposed to examine the hypothesis that all cluster galaxies are drawn from the same luminosity distribution (LD). In such a "statistical model" of galaxy LD, the brightest cluster galaxies (BCGs) are simply the statistical extreme of the galaxy population. Using a large sample of nearby clusters, we show that BCGs in high luminosity clusters (e.g., L_tot > 4x10^11 L_sun) are unlikely (probability <3x10^-4) to be drawn from the LD defined by all red cluster galaxies more luminous than M_r=-20. On the other hand, BCGs in less luminous clusters are consistent with being the statistical extreme. Applying our method to the second brightest galaxies, we show that they are consistent with being the statistical extreme, which implies that the BCGs are also distinct from non-BCG luminous, red, cluster galaxies. We point out some issues with the interpretation of the classical tests proposed by Tremaine & Richstone (1977) that are designed to examine the statistical nature of BCGs, investigate the robustness of both our statistical test and those of TR against difficulties in photometry of galaxies of large angular size, and discuss the implication of our findings on surveys that use the luminous red galaxies to measure the baryon acoustic oscillation features in the galaxy power spectrum.Comment: 12 pages, 8 figures, 4 tables; published in Ap

    Treatment compliance and effectiveness of a cognitive behavioural intervention for low back pain : a complier average causal effect approach to the BeST data set

    Get PDF
    Background: Group cognitive behavioural intervention (CBI) is effective in reducing low-back pain and disability in comparison to advice in primary care. The aim of this analysis was to investigate the impact of compliance on estimates of treatment effect and to identify factors associated with compliance. Methods: In this multicentre trial, 701 adults with troublesome sub-acute or chronic low-back pain were recruited from 56 general practices. Participants were randomised to advice (control n = 233) or advice plus CBI (n = 468). Compliance was specified a priori as attending a minimum of three group sessions and the individual assessment. We estimated the complier average causal effect (CACE) of treatment. Results: Comparison of the CACE estimate of the mean treatment difference to the intention-to-treat (ITT) estimate at 12 months showed a greater benefit of CBI amongst participants compliant with treatment on the Roland Morris Questionnaire (CACE: 1.6 points, 95% CI 0.51 to 2.74; ITT: 1.3 points, 95% CI 0.55 to 2.07), the Modified Von Korff disability score (CACE: 12.1 points, 95% CI 6.07 to 18.17; ITT: 8.6 points, 95% CI 4.58 to 12.64) and the Modified von Korff pain score (CACE: 10.4 points, 95% CI 4.64 to 16.10; ITT: 7.0 points, 95% CI 3.26 to 10.74). People who were non-compliant were younger and had higher pain scores at randomisation. Conclusions: Treatment compliance is important in the effectiveness of group CBI. Younger people and those with more pain are at greater risk of non-compliance

    Copyright & Privacy - Through the Political Lens, 4 J. Marshall Rev. Intell. Prop. L. 306 (2005)

    Get PDF
    Veteran beltway players discuss the politics of P2P technology and Privacy. How far can or should Congress go? Can the United States export its values or its laws in this area? Are content owners in a losing Luddite struggle? What is the role of litigators, lobbyists and legislators in this war

    Towards More Precise Survey Photometry for PanSTARRS and LSST: Measuring Directly the Optical Transmission Spectrum of the Atmosphere

    Full text link
    Motivated by the recognition that variation in the optical transmission of the atmosphere is probably the main limitation to the precision of ground-based CCD measurements of celestial fluxes, we review the physical processes that attenuate the passage of light through the Earth's atmosphere. The next generation of astronomical surveys, such as PanSTARRS and LSST, will greatly benefit from dedicated apparatus to obtain atmospheric transmission data that can be associated with each survey image. We review and compare various approaches to this measurement problem, including photometry, spectroscopy, and LIDAR. In conjunction with careful measurements of instrumental throughput, atmospheric transmission measurements should allow next-generation imaging surveys to produce photometry of unprecedented precision. Our primary concerns are the real-time determination of aerosol scattering and absorption by water along the line of sight, both of which can vary over the course of a night's observations.Comment: 41 pages, 14 figures. Accepted PAS

    Aerosol Characteristics at a High Altitude Location in Central Himalayas: Optical Properties and Radiative Forcing

    Full text link
    Collocated measurements of the mass concentrations of aerosol black carbon (BC) and composite aerosols near the surface were carried out along with spectral aerosol optical depths (AODs) from a high altitude station, Manora Peak in Central Himalayas, during a comprehensive aerosol field campaign in December 2004. Despite being a pristine location in the Shivalik Ranges of Central Himalayas, and having a monthly mean AOD (at 500 nm) of 0.059 ±\pm 0.033 (typical to this site), total suspended particulate (TSP) concentration was in the range 15 - 40 micro g m^(-3) (mean value 27.1 ±\pm 8.3 micro g m^(-3)). Interestingly, aerosol BC had a mean concentration of 1.36 ±\pm 0.99 micro g m^(-3), contributed to ~5.0 ±\pm 1.3 % to the composite aerosol mass. This large abundance of BC is found to have linkages to the human activities in the adjoining valley and to the boundary layer dynamics. Consequently, the inferred single scattering albedo lies in the range of 0.87 to 0.94 (mean value 0.90 ±\pm 0.03), indicating significant aerosol absorption. The estimated aerosol radiative forcing was as low as 4.2 W m^(-2) at the surface, +0.7 W m^(-2) at the top of the atmosphere, implying an atmospheric forcing of +4.9 W m^(-2). Though absolute value of the atmospheric forcing is quite small, which arises primarily from the very low AOD (or the column abundance of aerosols), the forcing efficiency (forcing per unit optical depth) was \sim88 W m^(-2), which is attributed to the high BC mass fraction.Comment: 32 Pages, Accepted in JGR (Atmosphere
    corecore