H2O–D2O Condensation in A Supersonic Nozzle

We examined the condensation of H2O, D2O, and four intermediate mixtures (20, 40, 60, and 80 mol % D2O) in a supersonic nozzle. Because the physical and chemical properties of protonated and deuterated water are so similar, this system is ideal for studying the change in condensation behavior as a function of condensible composition. In our experiments dilute mixtures of condensible vapor in N2 are expanded from three different stagnation temperatures resulting in a broad range of onset temperatures (190–238 K) and pressures (27–787 kPa). For a fixed stagnation temperature, the partial pressure required to maintain the onset of condensation at a given location or temperature in the nozzle is consistently higher for H2O than for D2O. In contrast, the supersaturation at fixed onset temperature is usually higher for D2O than for H2O and this difference increases toward lower temperature. The partial pressure at onset for the intermediate mixtures varied linearly between the values observed for the pure components in this ideal system

Small Angle Neutron Scattering from D2O–H2O Nanodroplets and Binary Nucleation Rates in A Supersonic Nozzle

Small angle neutron scattering (SANS) experiments were used to characterize binary nanodroplets composed of D2O and H2O. The droplets were formed by expanding dilute mixtures of condensible vapor in a N2 carrier gas through a supersonic nozzle, while maintaining the onset of condensation at a fixed position in the nozzle. It is remarkable, given the small coherent scattering length density of light water, that even the pure H2O aerosol gave a scattering signal above background. The scattering spectra were analyzed assuming a log-normal distribution of droplets. On average, the geometric radius of the nanodroplets rg was rg=13 (±1) nm, the polydispersity ln σr was ln σr=0.19 (±0.07), and the number density N was N=(2±0.2)⋅1011 cm−3. The aerosol volume fractions derived from the SANS measurements are consistent with those derived from the pressure trace experiments, suggesting that the composition of the droplets was close to that of the initial condensible mixture. A quantitative analysis of the scattering spectra as a function of the isotopic composition gave further evidence that the binary droplets exhibit ideal mixing behavior. Because both the stagnation temperature T0 and the location of onset were fixed, the temperature corresponding to the maximum nucleation rate was constant at TJ max=229 (±1) K. Thus, the experiments let us estimate the isothermal peak nucleation rates as a function of the isotopic composition. The nucleation rates were found to be essentially constant with Jmax equal to (3.6±0.5)⋅1016 cm−3 s−1 at a mean supersaturation of 44 (±3)

Design and baseline characteristics of the finerenone in reducing cardiovascular mortality and morbidity in diabetic kidney disease trial

Background: Among people with diabetes, those with kidney disease have exceptionally high rates of cardiovascular (CV) morbidity and mortality and progression of their underlying kidney disease. Finerenone is a novel, nonsteroidal, selective mineralocorticoid receptor antagonist that has shown to reduce albuminuria in type 2 diabetes (T2D) patients with chronic kidney disease (CKD) while revealing only a low risk of hyperkalemia. However, the effect of finerenone on CV and renal outcomes has not yet been investigated in long-term trials. Patients and Methods: The Finerenone in Reducing CV Mortality and Morbidity in Diabetic Kidney Disease (FIGARO-DKD) trial aims to assess the efficacy and safety of finerenone compared to placebo at reducing clinically important CV and renal outcomes in T2D patients with CKD. FIGARO-DKD is a randomized, double-blind, placebo-controlled, parallel-group, event-driven trial running in 47 countries with an expected duration of approximately 6 years. FIGARO-DKD randomized 7,437 patients with an estimated glomerular filtration rate >= 25 mL/min/1.73 m(2) and albuminuria (urinary albumin-to-creatinine ratio >= 30 to <= 5,000 mg/g). The study has at least 90% power to detect a 20% reduction in the risk of the primary outcome (overall two-sided significance level alpha = 0.05), the composite of time to first occurrence of CV death, nonfatal myocardial infarction, nonfatal stroke, or hospitalization for heart failure. Conclusions: FIGARO-DKD will determine whether an optimally treated cohort of T2D patients with CKD at high risk of CV and renal events will experience cardiorenal benefits with the addition of finerenone to their treatment regimen. Trial Registration: EudraCT number: 2015-000950-39; ClinicalTrials.gov identifier: NCT02545049

Experimental Evidence for Internal Structure in Aqueous-Organic Nanodroplets

The spatial distribution of species within an aerosol droplet influences how it interacts with its environment. Despite the ubiquity of multicomponent nanodroplets in natural and technological aerosols, there are no published measurements of their internal structure. Here, we report the first experimental results for structure in aqueous organic nanodroplets based on small angle neutron scattering by high number density aerosols. For H2O-n-butanol droplets, fitting of the diffraction patterns confirms the picture of an aqueous core containing 3 mol% alcohol covered by a shell of densely packed alcohol molecules

D2O-H2O Condensation in Supersonic Nozzles: I. Experiments

Pressure trace measurements and small angle neutron scattering (SANS) were used to probe the binary condensation of D2O-H2O mixtures in a supersonic nozzle. Each expansion started from the same initial pressure (carrier gas and condensible vapor) and temperature. The partial pressures of D2O and H2O were adjusted so that the onset of condensation always occurred at the same position in the nozzle. Under these conditions, the total pressure of condensible at onset varied linearly between the pressures of the pure components. Furthermore, the partial pressure at onset for pure H2O was 29–34% higher than that for pure D2O. The SANS scattering signals also varied systematically with the mixture composition. As the mixtures became progressively richer in H2O, the scattering intensity dropped rapidly because the scattering length of H2O is much smaller in magnitude and of opposite sign to that of D2O. Further analysis of the scattering spectra showed that the particle size of the aerosol was increasing as the mixtures became more water rich. The increase in particle size was consistent with the increase in condensible molar flowrate needed to maintain onset at a fixed position in the nozzle as the mixture becomes richer in H2O

DNA Cholesteric Pitch as a Function of Density and Ionic Strength

The nature of chiral interactions among chiral biopolymers, such as DNA, protein α-helices, and rodlike virus particles, remains elusive. In particular, a satisfactory model connecting molecular chiral interactions and the pitch of the resulting chiral mesophases is lacking. We report the measurement of short-fragment (146-bp) DNA cholesteric spherulite pitch as a function of osmotic pressure, average DNA interaxial spacing, and salt concentration. We determined cholesteric pitch and interaxial spacing by polarizing optical microscopy and x-ray scattering, respectively, from which the twist-angle between DNA molecules can be calculated. Surprisingly, we found that decreasing ionic strength resulted in weaker chiral interactions between DNA chains, as evidenced by the decrease in the twist-angle, and consequent increase in the cholesteric pitch, for a fixed interaxial spacing. We propose that this behavior can be explained by increased smearing-out of the helical charge pattern along DNA as the Debye screening length is increased

Osmotically Induced Helix-Coil Transition in Poly(Glutamic Acid)

Protein folding and conformational changes are influenced by protein-water interactions and, as such, the energetics of protein function are necessarily linked to water activity. Here, we have chosen the helix-coil transition in poly(glutamic acid) as a model system to investigate the importance of hydration to protein structure by using the osmotic stress method combined with circular dichroism spectroscopy. Osmotic stress is applied using poly(ethylene glycol), molecular weight of 400, as the osmolyte. The energetics of the helix-coil transition under applied osmotic stress allows us to calculate the change in the number of preferentially included water molecules per residue accompanying the thermally induced conformational change. We find that osmotic stress raises the helix-coil transition temperature by favoring the more compact α-helical state over the more hydrated coil state. The contribution of other forces to α-helix stability also are explored by varying pH and studying a random copolymer, poly(glutamic acid-r-alanine). In this article, we clearly show the influence of osmotic pressure on the peptide folding equilibrium. Our results suggest that to study protein folding in vitro, the osmotic pressure, in addition to pH and salt concentration, should be controlled to better approximate the crowded environment inside cells

Impact of Surface Active Compounds on Iron Catalyzed Oxidation of Methyl Linolenate in AOT-Water-Hexadecane Systems

Edible oils contain minor surface active components that form micro-heterogeneous environments, such as reverse micelles, which can alter the rate and direction of chemical reactions. However, little is known about the role of these micro-heterogeneous environments on lipid oxidation of bulk oil. Our objective was to evaluate the ability of water, cumene hydroperoxide, oleic acid, and phosphatidylcholine to influence the structure of reverse micelles in a model oil system: sodium bis(2-ethylhexyl) sulfosuccinate (aerosol-OT; AOT) in n-hexadecane. The influence of reverse micelle structure on iron catalyzed lipid oxidation was determined using methyl linolenate as an oxidizable substrate. The size and shape of the reverse micelle were investigated by small-angle x-ray scattering, and water contents was determined by Karl Fischer titrations. Lipid hydroperoxides and thiobarbituric acid reactive substances were used to follow lipid oxidation. Our results showed that AOT formed spherical reverse micelles in hexadecane. The size of the reverse micelles increased with increased water or phosphatidylcholine concentration, but decreased upon addition of cumene hydroperoxide or oleic acid. Iron catalyzed oxidation of methyl linolenate in the reverse micelle system decreased with increasing water concentration. Addition of phosphatidylcholine into the reverse micelle systems decreased methyl linolenate oxidation compared to control and reverse micelles with added oleic acid. These results indicate that water, cumene hydroperoxide, oleic acid, and phosphatidylcholine can alter reverse micelle size and lipid oxidation rates. Understanding how these compounds influence reverse micelle structure and lipid oxidation rates could provide information on how to modify bulk oil systems to increase oxidative stability