Cytoxicity and cytostatic drug removal in a membrane bioreactor from wastewater

The growing use of antineoplastic drugs in cancer therapy is an emerging issue in environmental research. The presence of the anticancer drug cyclophosphamide (CP) in municipal wastewater raises several environmental problems. Besides its cytotoxic effects, CP possesses teratogenic and mutagenic properties and is a known human carcinogen. The application of membrane bioreactor (MBR) technology was investigated with the aim of evaluating its potential for cytostatic drug bioremoval. The toxicity removal was assessed from biomarkers tests and related to the choice of the reactor operating conditions. The influence of sludge retention times (SRT) on CP removal was suited but not significant effects were found for variation of SRT from 50 days to 70 days. CP removal up to 80% was achieved under studied operating conditions. In front of such pollution, evidence has been made about the use of MBR. Our study proofed that advances wastewater treatment using a MBR provides a suitable process for lowering CP concentrations before discharge into the aqueous environment. However, a tertiary treatment is necessary for the complete elimination of toxicity

Cyclophosphamide removal from water by nanofiltration and reverse osmosis membrane

The rejection of cyclophosphamide (CP) by nanofiltration (NF) and reverse osmosis (RO) membranes from ultrapure (Milli-Q) water and membrane bioreactor (MBR) effluent was investigated. Lyophilization–extraction and detection methods were first developed for CP analysis in different water matrices. Experimental results showed that the RO membrane provided excellent rejection (>90%) under all operating conditions. Conversely, efficiency of CP rejection by NF membrane was poor: in the range of 20–40% from Milli-Q water and around 60% from MBR effluent. Trans-membrane pressure, initial CP concentration and ionic strength of the feed solution had almost no effect on CP retention by NF. On the other hand, the water matrix proved to have a great influence: CP rejection rate by NF was clearly enhanced when MBR effluent was used as the background solution. Membrane fouling and interactions between the CP and water matrix appeared to contribute to the higher rejection of CP

Cyclophosphamide removal by nanofiltration and reverse osmosis membranes - effect of water matrix properties

The rejection of cyclophosphamide (CP) by nanofiltration (NF) and reverse osmosis (RO) membranes from ultrapure (Milli-Q) water and membrane bioreactor (MBR) effluent was investigated. Experimental results showed that the RO membrane provided excellent rejection (>90%) under all operating conditions. Conversely, efficiency of CP rejection by NF membrane was poor: in the range of 20-40% from Milli-Q water and around 60% from MBR effluent. Trans-membrane pressure, initial CP concentration and ionic strength of the feed solution had almost no effect on CP retention by NF. On the other hand, the water matrix proved to have a great influence: CP rejection rate by NF was clearly enhanced when MBR effluent was used as the background solution. Membrane fouling and interactions between the CP molecule and water matrix appeared to contribute to the higher rejection of CP

Cytotoxicity micropollutant removal in a crossflow membrane bioreactor

The application of membrane bioreactor (MBR) technology was investigated with the aim of evaluating its potential for cytostatic drug and cytotoxicity bioremoval. The toxicity removal was assessed from biomarker test. CP removal of up to 80% was achieved under the operating conditions studied (HRT of 48 h and a SRT of 50 days). The increase of TMP was associated with an increase of supernatant toxicity as if fouling led to retention of the toxicity. Peaks of supernatant cytotoxicity were correlated with peaks in supernatant humic acid contents. It may suggest that molecules with a toxic effect may be adsorbed or entrapped in humic acids substances. Our study then points out that advances in wastewater treatment using an MBR can provide a suitable process for lowering CP concentrations before discharge into the aqueous environment. However, a tertiary treatment is necessary if complete elimination of toxicity is targeted

Formulation, physicochemical characterization and stability study of lithium-loaded microemulsion system

International audienceLithium biocompatible microemulsion based on Peceol(®), lecithin, ethanol and water was studied in attempt to identify the optimal compositions in term of drug content, physicochemical properties and stability. Lithium solubilization in microemulsion was found to be compatible with a drug-surfactant binding model. Lithium ions were predominantly solubilized within lecithin head group altering significantly the interfacial properties of the system. Pseudo-ternary phase diagrams of drug free and drug loaded microemulsions were built at constant ethanol/lecithin weight ratio (40/60). Lithium loaded microemulsion has totally disappeared in the Peceol(®) rich part of phase diagram; critical fractions of lecithin and ethanol were required for the formation of stable microemulsion. The effect of lithium concentration on the properties and physical stability of microemulsions were studied using microscopy, Karl Fischer titrations, rheology analyses, conductivity measurements and centrifugation tests. The investigated microemulsions were found to be stable under accelerated storage conditions. The systems exhibited low viscosity and behaved as Newtonian fluid and no structural transition was shown

Age-at-death estimation based on the study of frontosphenoidal sutures

Determination of age at the time of death based on the observation of cranial sutures has led to numerous studies with sometimes contradictory results. The initial hypothesis being that suture closure is part of an age-related physiological process, the conflicting results have been interpreted by various authors as secondary to the choice of sutures, under the co-existing influence of pathological factors or genetic factors, or even independent of age. Despite these differences, macroscopic methods remain much used in anthropology and in forensic medicine. In our work, we evaluated the value of the degree of closure of the frontosphenoidal suture in estimating age at death of mature subjects, with the secondary objective of establishing a linear regression which could be used in routine practice. The study concerned bone specimens from individuals whose age, sex and medical history were known. Macroscopic observation was carried out on the ectocranial and endocranial sides according to four stages of closure previously defined. 290 sutures were taken from a population of whom two-thirds were men. The method can be repeated and reproduced and the regression established shows the confidence range for average error to be 1.5 years. While this result is of interest in terms of precision in prediction for a group of people, the prediction range is too great ( 23 years) to be applicable to a single individual as part of a forensic procedure

Biocompatibility assessment of functionalized magnetic mesoporous silica nanoparticles in human HepaRG cells

International audienc

Biocompatibility assessment of functionalized magnetic mesoporous silica nanoparticles in human HepaRG cells

Magnetic mesoporous silica nanoparticles (M-MSNs) are a promising class of nanoparticles for drug delivery. However, a deep understanding of the toxicological mechanisms of action of these nanocarriers is essential, especially in the liver. The potential toxicity on HepaRG cells of pristine, pegylated (PEG), and lipid (DMPC) M-MSNs were compared. Based on MTT assay and real-time cell impedance, none of these NPs presented an extensive toxicity on hepatic cells. However, we observed by transmission electron microscopy (TEM) that the DMPC and pristine M-MSNs were greatly internalized. In comparison, PEG M-MSNs showed a slower cellular uptake. Whole gene expression profiling revealed the M-MSNs molecular modes of action in a time-and dose-dependent manner. The lowest dose tested (1.6 µg/cm²) induced no molecular effect and was defined as ‘No Observed Transcriptional Effect level’. The dose 16 µg/cm² revealed nascent but transient effects. At the highest dose (80 µg/cm²), adverse effects have clearly arisen and increased over time. The limit of biocompatibility for HepaRG cells could be set at 16 µg/cm² for these NPs. Thanks to a comparative pathway-driven analysis, we highlighted the sequence of events that leads to the disruption of hepatobiliary system, elicited by the three types of M-MSNs, at the highest dose. The Adverse Outcome Pathway of hepatic cholestasis was implicated. Toxicogenomics applied to cell cultures is an effective tool to characterize and compare the modes of action of many substances. We propose this strategy as an asset for upstream selection of the safest nanocarriers in the framework of regulation for nanobiosafet

Experimental separation steps influence the protein content of corona around mesoporous silica nanoparticles

International audienc

A Novel Approach to the Facile Growth and Organization of Photothermal Prussian Blue Nanocrystals on Different Surfaces

International audienceWe report here a novel "one-pot" approach for the controlled growth and organization of Prussian blue nanostructures on three different surfaces: pure Au 0 , cysteamine-functionalized Au 0 , and SiO2-supported lipid bilayers with different natures of lipids. We demonstrate that fine control over the size, morphology, and the degree and homogeneity of the surface coverage by Prussian Blue (PB) nanostructures may be achieved by manipulating different parameters, which are the precursor concentration, the nature of the functional groups or the nature of lipids on the surfaces. This allows the growth of isolated PB nanopyramids and nanocubes or the design of thin dense films over centimeter square surfaces. The formation of unusual Prussian blue nanopyramids is discussed. Finally, we demonstrate, by using experimental techniques and theoretical modeling, that PB nanoparticles deposited on the gold surface exhibit strong photothermal properties, permitting a rapid temperature increase up to 90 °C with a conversion of the laser power of almost 50% for power source heat