Generation of a composite grid for turbine flows and consideration of a numerical scheme

A composite grid was generated for flows in turbines. It consisted of the C-grid (or O-grid) in the immediate vicinity of the blade and the H-grid in the middle of the blade passage between the C-grids and in the upstream region. This new composite grid provides better smoothness, resolution, and orthogonality than any single grid for a typical turbine blade with a large camber and rounded leading and trailing edges. The C-H (or O-H) composite grid has an unusual grid point that is connected to more than four neighboring nodes in two dimensions (more than six neighboring nodes in three dimensions). A finite-volume lower-upper (LU) implicit scheme to be used on this grid poses no problem and requires no special treatment because each interior cell of this composite grid has only four neighboring cells in two dimensions (six cells in three dimensions). The LU implicit scheme was demonstrated to be efficient and robust for external flows in a broad flow regime and can be easily applied to internal flows and extended from two to three dimensions

Patient-Related Barriers to Timely Dialysis Access Preparation: A Qualitative Study of the Perspectives of Patients, Family Members, and Health Care Providers

Rational & Objective A key aspect of smooth transition to dialysis is the timely creation of a permanent access. Despite early referral to kidney care, initiation onto dialysis is still suboptimal for many patients, which has clinical and cost implications. This study aimed to explore perspectives of various stakeholders on barriers to timely access creation. Study Design Qualitative study. Setting & Participants Semi-structured interviews with 96 participants (response rate, 67%), including patients with stage 4 chronic kidney disease (n = 30), new hemodialysis patients with (n = 18) and without (n = 20) permanent access (arteriovenous fistula), family members (n = 19), and kidney health care providers (n = 9). Analytical Approach Thematic analysis. Results Patients reported differential levels of behavioral activation toward access creation: avoidance/denial, wait and see, or active intention. 6 core themes were identified: (1) lack of symptoms, (2) dialysis fear and practical concerns (exaggerated fear, pain, cost, lifestyle disruptions, work-related concerns, burdening their families), (3) evaluating value against costs/risks of access creation (benefits, threat of operation, viability, prompt for early initiation), (4) preference for alternatives, (5) social influences (hearsay, family involvement, experiences of others), and (6) health care provider interactions (mistrust, interpersonal tension, lack of clarity on information). Themes were common to all groups, whereas nuanced perspectives of family members and health care providers were noted in some subthemes. Limitations Response bias. Conclusions Individual, interpersonal, and psychosocial factors compromise dialysis preparation and contribute to suboptimal dialysis initiation. Our findings support the need for interventions to improve patient and family engagement and address emotional concerns and misperceptions about preparing for dialysis

Influence of Deformed Metal Decking Composite Floors to Beam-column Connections

A series of tests designed to investigate the interaction of a variety of different steel beam to column connection details with a composite metal deck floor is described. The main emphasis is on assessing the connections\u27 moment capacity, rotational stiffness and rotation capacity. The full details of the experimental behaviour of the flush end plate and partial depth end plate connections will be described in this paper. A simple method for moment capacity calculation based on the test results is proposed herein

Laser-based three-dimensional manufacturing technologies for rechargeable batteries.

Laser three-dimensional (3D) manufacturing technologies have gained substantial attention to fabricate 3D structured electrochemical rechargeable batteries. Laser 3D manufacturing techniques offer excellent 3D microstructure controllability, good design flexibility, process simplicity, and high energy and cost efficiencies, which are beneficial for rechargeable battery cell manufacturing. In this review, notable progress in development of the rechargeable battery cells via laser 3D manufacturing techniques is introduced and discussed. The basic concepts and remarkable achievements of four representative laser 3D manufacturing techniques such as selective laser sintering (or melting) techniques, direct laser writing for graphene-based electrodes, laser-induced forward transfer technique and laser ablation subtractive manufacturing are highlighted. Finally, major challenges and prospects of the laser 3D manufacturing technologies for battery cell manufacturing will be provided

RANS and DES Computations for a Wing with Ice Accretion

A computational investigation was performed to assess the effectiveness of Detached Eddy Simulation (DES) as a tool for predicting icing effects. The AVUS code, a public domain flow solver, was employed to compute solutions for an iced wing configuration using DES and steady Reynolds Averaged Navier-Stokes (RANS) equation methodologies. The wing section considered here was a business jet airfoil (GLC305) with a 22.5-minute glaze ice accretion (944-ice shape). The section was extruded to form a rectangular planform. The model was mounted between two walls so no tip effects were considered. The numerical results were validated by comparison with experimental data for the same configuration. The time-averaged DES computations showed some improvement in lift and drag results near stall when compared to steady RANS results. However, comparisons of the flow field details did not show the level of agreement suggested by the integrated quantities. More validation is needed to determine what role DES can play as part of an overall icing effects prediction strategy

Chemical Raman Enhancement of Organic Adsorbates on Metal Surfaces

Using a combination of first-principles theory and experiments, we provide a quantitative explanation for chemical contributions to surface-enhanced Raman spectroscopy for a well-studied organic molecule, benzene thiol, chemisorbed on planar Au(111) surfaces. With density functional theory calculations of the static Raman tensor, we demonstrate and quantify a strong mode-dependent modification of benzene thiol Raman spectra by Au substrates. Raman active modes with the largest enhancements result from stronger contributions from Au to their electron-vibron coupling, as quantified through a deformation potential, a well-defined property of each vibrational mode. A straightforward and general analysis is introduced that allows extraction of chemical enhancement from experiments for specific vibrational modes; measured values are in excellent agreement with our calculations.Comment: 5 pages, 4 figures and Supplementary material included as ancillary fil

WAX INDUCER1 (HvWIN1) transcription factor regulates free fatty acid biosynthetic genes to reinforce cuticle to resist Fusarium head blight in barley spikelets

Fusarium head blight (FHB), caused by Fusarium graminearum, is one of the most devastating diseases of wheat and barley. Resistance to FHB is highly complex and quantitative in nature, and is most often classified as resistance to spikelet infection and resistance to spread of pathogen through the rachis. In the present study, a resistant (CI9831) and a susceptible (H106-371) two-row barley genotypes, with contrasting levels of spikelet resistance to FHB, pathogen or mock-inoculated, were profiled for metabolites based on liquid chromatography and high resolution mass spectrometry. The key resistance-related (RR) metabolites belonging to fatty acids, phenylpropanoids, flavonoids and terpenoid biosynthetic pathways were identified. The free fatty acids (FFAs) linoleic and palmitic acids were among the highest fold change RR induced (RRI) metabolites. These FFAs are deposited as cutin monomers and oligomers to reinforce the cuticle, which acts as a barrier to pathogen entry. Quantitative real-time PCR studies revealed higher expressions of KAS2, CYP86A2, CYP89A2, LACS2 and WAX INDUCER1 (HvWIN1) transcription factor in the pathogen-inoculated resistant genotype than in the susceptible genotype. Knockdown of HvWIN1 by virus-induced genes silencing (VIGS) in resistant genotype upon pathogen inoculation increased the disease severity and fungal biomass, and decreased the abundance of FFAs like linoleic and palmitic acids. Notably, the expression of CYP86A2, CYP89A2 and LAC2 genes was also suppressed, proving the link of HvWIN1 in regulating these genes in cuticle biosynthesis as a defense response.Arun Kumar; Kalenahalli N. Yogendra. Shailesh Karre, Ajjamada C. Kushalappa, Yves Dion, Thin M. Cho

Effect of worksheet scaffolds on student learning in problem-based learning

The purpose of this study was to investigate the effect of worksheets as a scaffolding tool on students’ learning achievement in a problem-based learning (PBL) environment. Seventeen PBL classes (N = 241) were randomly assigned to two experimental groups—one with a worksheet provided and the other without. Students’ learning of the topic at hand was evaluated by comparing results from pre- and post-lesson concept recall tests. We also obtained information about students’ perceptions of factors impacting their learning using a Learning Impact Questionnaire. The data was analyzed by means of analyses of variance. Results of the study indicated that there was no statistically significant difference between the levels of understanding for both groups of students. In addition, survey results revealed that the strongest factor perceived by students to impact their learning in a PBL context is the tutor followed by team and class dynamics, while the influence of the worksheet was rated lowest. These findings suggest that scaffolds such as worksheets may not play a significant role in enhancing students’ learning within the social constructivist framework of problem-based learning. On the other hand, the importance of the role of tutor and collaborative small group learning which are key features of PBL is reinforced

A performance comparison of the contiguous allocation strategies in 3D mesh connected multicomputers

The performance of contiguous allocation strategies can be significantly affected by the distribution of job execution times. In this paper, the performance of the existing contiguous allocation strategies for 3D mesh multicomputers is re-visited in the context of heavy-tailed distributions (e.g., a Bounded Pareto distribution). The strategies are evaluated and compared using simulation experiments for both First-Come-First-Served (FCFS) and Shortest-Service-Demand (SSD) scheduling strategies under a variety of system loads and system sizes. The results show that the performance of the allocation strategies degrades considerably when job execution times follow a heavy-tailed distribution. Moreover, SSD copes much better than FCFS scheduling strategy in the presence of heavy-tailed job execution times. The results also show that the strategies that depend on a list of allocated sub-meshes for both allocation and deallocation have lower allocation overhead and deliver good system performance in terms of average turnaround time and mean system utilization