Analysis of potential benefits of integrated-gasifier combined cycles for a utility system

Potential benefits of integrated gasifier combined cycle (IGCC) units were evaluated for a reference utility system by comparing long range expansion plans using IGCC units and gas turbine peakers with a plan using only state of the art steam turbine units and gas turbine peakers. Also evaluated was the importance of the benefits of individual IGCC unit characteristics, particularly unit efficiency, unit equivalent forced outage rate, and unit size. A range of IGCC units was analyzed, including cases achievable with state of the art gas turbines and cases assuming advanced gas turbine technology. All utility system expansion plans that used IGCC units showed substantial savings compared with the base expansion plan using the steam turbine units

New features and applications of PRESTO, a computer code for the performance of regenerative, superheated steam turbine cycles

The code was designed to analyze performance at valves-wide-open design flow. The code can model conventional steam cycles as well as cycles that include such special features as process steam extraction and induction and feedwater heating by external heat sources. Convenience features and extensions to the special features were incorporated into the PRESTO code. The features are described, and detailed examples illustrating the use of both the original and the special features are given

Three-dimensional inviscid analysis of radial turbine flow and a limited comparison with experimental data

The three-dimensional inviscid DENTON code is used to analyze flow through a radial-inflow turbine rotor. Experimental data from the rotor are compared with analytical results obtained by using the code. The experimental data available for comparison are the radial distributions of circumferentially averaged values of absolute flow angle and total pressure downstream of the rotor exit. The computed rotor-exit flow angles are generally underturned relative to the experimental values, which reflect the boundary-layer separation at the trailing edge and the development of wakes downstream of the rotor. The experimental rotor is designed for a higher-than-optimum work factor of 1.126 resulting in a nonoptimum positive incidence and causing a region of rapid flow adjustment and large velocity gradients. For this experimental rotor, the computed radial distribution of rotor-exit to turbine-inlet total pressure ratios are underpredicted due to the errors in the finite-difference approximations in the regions of rapid flow adjustment, and due to using the relatively coarser grids in the middle of the blade region where the flow passage is highly three-dimensional. Additional results obtained from the three-dimensional inviscid computation are also presented, but without comparison due to the lack of experimental data. These include quasi-secondary velocity vectors on cross-channel surfaces, velocity components on the meridional and blade-to-blade surfaces, and blade surface loading diagrams. Computed results show the evolution of a passage vortex and large streamline deviations from the computational streamwise grid lines. Experience gained from applying the code to a radial turbine geometry is also discussed

Generation of a composite grid for turbine flows and consideration of a numerical scheme

A composite grid was generated for flows in turbines. It consisted of the C-grid (or O-grid) in the immediate vicinity of the blade and the H-grid in the middle of the blade passage between the C-grids and in the upstream region. This new composite grid provides better smoothness, resolution, and orthogonality than any single grid for a typical turbine blade with a large camber and rounded leading and trailing edges. The C-H (or O-H) composite grid has an unusual grid point that is connected to more than four neighboring nodes in two dimensions (more than six neighboring nodes in three dimensions). A finite-volume lower-upper (LU) implicit scheme to be used on this grid poses no problem and requires no special treatment because each interior cell of this composite grid has only four neighboring cells in two dimensions (six cells in three dimensions). The LU implicit scheme was demonstrated to be efficient and robust for external flows in a broad flow regime and can be easily applied to internal flows and extended from two to three dimensions

Economic Fundamentals and Managed Floating Exchange Rate Regime in Singapore

¡°Pegging the Singapore dollar to a basket of currencies instead of a fixed rate to the US dollar and having a transparent system were claimed by the government of Singapore to have enabled the country to weather the Asian financial crisis better. This empirical paper reviews the claim by testing the consistency of observed Singapore dollar real exchange rate against the country¡¯s key real economic fundamentals. Employing the concept of Natural Real Equilibrium Exchange Rate (NATREX), our study finds that the real effective exchange rate has floated around the NATREX rate in 1990¡¯s. Hence, our test results support the official statement.

Developing Technology Applications for Improving the Problem-Solving Skills of Middle School Students with Learning Disabilities

The achievement gap in mathematics education continues to be a concern in the United States. Students with disabilities (SWD) are often excluded from the general education curriculum or the least restrictive environment due to their low performance in mathematics and disability-related deficits. Legislative and professional reports have addressed the needs of SWD by promoting evidence-based math interventions using instructional technology. However, the focus of many math interventions with instructional technology has been limited to basic facts instruction or drill-and-practice routines. In this study, I developed a curriculum-based technology tool called Anchored Instruction with Technology Applications (AITA) based on pedagogical concepts of Enhanced Anchored Instruction (EAI). For more than a decade, research has shown EAI to be effective in improving the math achievement of SWD. EAI is based on situated cognition learning theory and combines multimedia-based instruction with hands-on problems in real world contexts. AITA integrates technology applications such as 3D printers with EAI curriculum for improving problem-solving skills of SWD. The study examined differential effects of AITA in resource rooms and inclusive classrooms. Results showed significant improvement in favor of AITA for SWD in both problem-solving and computation performance

Diffusion and migration in polymer electrolytes

Mixtures of neutral polymers and lithium salts have the potential to serve as electrolytes in next-generation rechargeable Li-ion batteries. The purpose of this review is to expose the delicate interplay between polymer-salt interactions at the segmental level and macroscopic ion transport at the battery level. Since complete characterization of this interplay has only been completed in one system: mixtures of poly(ethylene oxide) and lithium bis(trifluoromethanesulfonyl)imide (PEO/LiTFSI), we focus on data obtained from this system. We begin with a discussion of the activity coefficient, followed by a discussion of six different diffusion coefficients: the Rouse motion of polymer segments is quantified by Dseg, the self-diffusion of cations and anions is quantified by Dself,+ and Dself,−, and the build-up of concentration gradients in electrolytes under an applied potential is quantified by Stefan-Maxwell diffusion coefficients, D0+, D0-, and D+-. The Stefan-Maxwell diffusion coefficients can be used to predict the velocities of the ions at very early times after an electric field is applied across the electrolyte. The surprising result is that D0- is negative in certain concentration windows. A consequence of this finding is that at these concentrations, both cations and anions are predicted to migrate toward the positive electrode at early times. We describe the controversies that surround this result. Knowledge of the Stefan-Maxwell diffusion coefficients enable prediction of the limiting current. We argue that the limiting current is the most important characteristic of an electrolyte. Excellent agreement between theoretical and experimental limiting current is seen in PEO/LiTFSI mixtures. What sequence of monomers that, when polymerized, will lead to the highest limiting current remains an important unanswered question. It is our hope that the approach presented in this review will guide the development of such polymers

MAG3D and its application to internal flowfield analysis

MAG3D (multiblock adaptive grid, 3D) is a 3D solution-adaptive grid generation code which redistributes grid points to improve the accuracy of a flow solution without increasing the number of grid points. The code is applicable to structured grids with a multiblock topology. It is independent of the original grid generator and the flow solver. The code uses the coordinates of an initial grid and the flow solution interpolated onto the new grid. MAG3D uses a numerical mapping and potential theory to modify the grid distribution based on properties of the flow solution on the initial grid. The adaptation technique is discussed, and the capability of MAG3D is demonstrated with several internal flow examples. Advantages of using solution-adaptive grids are also shown by comparing flow solutions on adaptive grids with those on initial grids

Patient-Related Barriers to Timely Dialysis Access Preparation: A Qualitative Study of the Perspectives of Patients, Family Members, and Health Care Providers

Rational & Objective A key aspect of smooth transition to dialysis is the timely creation of a permanent access. Despite early referral to kidney care, initiation onto dialysis is still suboptimal for many patients, which has clinical and cost implications. This study aimed to explore perspectives of various stakeholders on barriers to timely access creation. Study Design Qualitative study. Setting & Participants Semi-structured interviews with 96 participants (response rate, 67%), including patients with stage 4 chronic kidney disease (n = 30), new hemodialysis patients with (n = 18) and without (n = 20) permanent access (arteriovenous fistula), family members (n = 19), and kidney health care providers (n = 9). Analytical Approach Thematic analysis. Results Patients reported differential levels of behavioral activation toward access creation: avoidance/denial, wait and see, or active intention. 6 core themes were identified: (1) lack of symptoms, (2) dialysis fear and practical concerns (exaggerated fear, pain, cost, lifestyle disruptions, work-related concerns, burdening their families), (3) evaluating value against costs/risks of access creation (benefits, threat of operation, viability, prompt for early initiation), (4) preference for alternatives, (5) social influences (hearsay, family involvement, experiences of others), and (6) health care provider interactions (mistrust, interpersonal tension, lack of clarity on information). Themes were common to all groups, whereas nuanced perspectives of family members and health care providers were noted in some subthemes. Limitations Response bias. Conclusions Individual, interpersonal, and psychosocial factors compromise dialysis preparation and contribute to suboptimal dialysis initiation. Our findings support the need for interventions to improve patient and family engagement and address emotional concerns and misperceptions about preparing for dialysis

CloudMe forensics : a case of big-data investigation

The significant increase in the volume, variety and velocity of data complicates cloud forensic efforts, as such big data will, at some point, become computationally expensive to be fully extracted and analyzed in a timely manner. Thus, it is important for a digital forensic practitioner to have a well-rounded knowledge about the most relevant data artefacts that could be forensically recovered from the cloud product under investigation. In this paper, CloudMe, a popular cloud storage service, is studied. The types and locations of the artefacts relating to the installation and uninstallation of the client application, logging in and out, and file synchronization events from the computer desktop and mobile clients are described. Findings from this research will pave the way towards the development of tools and techniques (e.g. data mining techniques) for cloud-enabled big data endpoint forensics investigation