11,637 research outputs found
Bipolar current driver for memory circuits
Circuit which logically determines the state of a flip-flop and amplifies the current from a clock pulse provides a bipolar driving current to a memory circuit, the polarity of which is determined by the state of a flip-flop. This principle may be applied to various memory driving circuits where power dissipation must be minimized
Flipflop interrogator and bi-polar current driver Patent
Interrogator and current driver circuit for combination with transistor flip-flop circui
Temperature effect on space charge dynamics in XLPE insulation
This paper reports on space charge evolution in crosslinked polyethylene (XLPE) planar samples approximately 1.20 mm thick subjected to electric stress level of 30 kVdc/mm under four temperature 25 oC, 50 oC, 70 oC and 90 oC for 24 hours. Space charge profiles in both as-received and degassed samples were measured using the laser induced pressure pulse (LIPP) technique. The dc threshold stresses at which space charge initiates are greatly affected by testing temperatures. The results suggest that testing temperature has numerous effects on space charge dynamics such as enhancement of ionic dissociation of polar crosslinked by-products, charge injection, charge mobility and electrical conductivity. Space charge distributions of very different nature were seen at lower temperatures when comparing the results of as-received samples with degassed samples. However at higher temperature, the space charge distribution took the same form, although of lower concentration in degassed samples. Space charge distributions are dominated by positive charge when tested at high temperatures regardless of sample treatment and positive charge propagation enhances as testing temperature increases. This can be a major cause of concern as positive charge propagation has been reported to be related to insulation breakdown
An experimental study of airfoil instability tonal noise with trailing edge serrations
This paper presents an experimental study of the effect of trailing edge serrations on airfoil instability noise. Detailed aeroacoustic measurements are presented of the noise radiated by an NACA-0012 airfoil with trailing edge serrations in a low to moderate speed flow under acoustical free field conditions. The existence of a separated boundary layer near the trailing edge of the airfoil at an angle of attack of 4.2 degree has been experimentally identified by a surface mounted hot-film arrays technique. Hot-wire results have shown that the saw-tooth surface can trigger a bypass transition and prevent the boundary layer from becoming separated. Without the separated boundary layer to act as an amplifier for the incoming Tollmien-Schlichting waves, the intensity and spectral characteristic of the radiated tonal noise can be affected depending upon the serration geometry. Particle Imaging Velocimetry (PIV) measurements of the airfoil wakes for a straight and serrated trailing edge are also reported in this paper. These measurements show that localized normal-component velocity fluctuations that are present in a small region of the wake from the laminar airfoil become weakened once serrations are introduced. Owing to the above unique characteristics of the serrated trailing edges, we are able to further investigate the mechanisms of airfoil instability tonal noise with special emphasis on the assessment of the wake and non-wake based aeroacoustic feedback model. It has been shown that the instability tonal noise generated at an angle of attack below approximately one degree could involve several complex mechanisms. On the other hand, the non-wake based aeroacoustic feedback mechanism alone is sufficient to predict all discrete tone frequencies accurately when the airfoil is at a moderate angle of attack
The effect of degassing on morphology and space charge
It is believed that space charge buildup in cross-linked polyethylene (XLPE) insulation is the main cause for premature failure of underground power cables. The space charge activities in XLPE depend on many factors such as additives, material treatment, ambient temperature, insulator/electrode interface, etc. Degassing is one of the material treatment process commonly employ in cable manufacturing to improve insulation performance. In this paper, investigation on the effect of degassing period has on the morphology and space charge was carried out. Planar XLPE samples of the same composite were subjected to different degassing time. It is discovered that apart from removing volatile by-products, degassing also anneal XLPE material; changing the morphology as a result
Structural relaxation in a supercooled molecular liquid
We perform molecular-dynamics simulations of a molecular system in
supercooled states for different values of inertia parameters to provide
evidence that the long-time dynamics depends only on the equilibrium structure.
This observation is consistent with the prediction of the mode-coupling theory
for the glass transition and with the hypothesis that the potential
energy-landscape controls the slow dynamics. We also find that dynamical
properties at intermediate wavenumber depend on the spatial correlation of the
molecule's geometrical center.Comment: 7 pages, 4 figures, Europhys. Lett. in pres
Cavitation induced starvation for piston-ring/liner tribological conjunction
The study investigates the mechanism of ring-liner lubrication in the vicinity of the top and bottom dead centres of an internal combustion engine. Predicting lubricant transient behaviour is critical when the inlet reversal leads to thin films and inherent metal-to-metal interaction. It was found that the cavitation, which is located at the trailing edge of the contact before reversal, briefly survives after reversal as a confined bubble at the leading edge. This depletes the film promoting starvation. Several algorithms were compared. It is concluded that the lubricant film is thinner than initially thought
Isovector channel of quark-meson-coupling model and its effect on symmetry energy
The non-relativistic approximation of the quark-meson-coupling model has been
discussed and compared with the Skyrme-Hartree-Fock model which includes spin
exchanges. Calculations show that the spin-exchange interaction has important
effect on the descriptions of finite nuclei and nuclear matter through the Fock
exchange. Also in the quark-meson-coupling model, it is the Fock exchange that
leads to a nonlinear density-dependent isovector channel and changes the
density-dependent behavior of the symmetry energy.Comment: 20 pages, 9 figures and 1 table, accepted for publication in Nuclear
Physics
A cognitive hierarchy model of games
Players in a game are “in equilibrium” if they are rational, and accurately predict other players' strategies. In many experiments, however, players are not in equilibrium. An alternative is “cognitive hierarchy” (CH) theory, where each player assumes that his strategy is the most sophisticated. The CH model has inductively defined strategic categories: step 0 players randomize; and step k thinkers best-respond, assuming that other players are distributed over step 0 through step k − 1. This model fits empirical data, and explains why equilibrium theory predicts behavior well in some games and poorly in others. An average of 1.5 steps fits data from many games
Laser Mode Bifurcations Induced by -Breaking Exceptional Points
A laser consisting of two independently-pumped resonators can exhibit mode
bifurcations that evolve out of the exceptional points (EPs) of the linear
system at threshold. The EPs are non-Hermitian degeneracies occurring at the
parity/time-reversal () symmetry breaking points of the threshold
system. Above threshold, the EPs become bifurcations of the nonlinear
zero-detuned laser modes, which can be most easily observed by making the gain
saturation intensities in the two resonators substantially different. Small
pump variations can then switch abruptly between different laser behaviors,
e.g. between below-threshold and -broken single-mode operation.Comment: 4 pages, 3 figure
- …