A comparison between different optimization criteria for tuned mass dampers design

Tuned mass sampers (TMDs) are widely used strategies for vibration control in many engineering applications, so that many TMD optimization criteria have been proposed till now. However, they normally consider only TMD stiffness and damping as design variables and assume that the tuned mass is a pre-selected value. In this work a more complete approach is proposed and then also TMD mass ratio is optimized. A standard single degree of freedom system is investigated to evaluate TMD protection efficiency in case of excitation at the support. More precisely, this model is used to develop two different optimizations criteria which minimize the main system displacement or the inertial acceleration. Different environmental conditions described by various char- acterizations of the input, here modelled by a stationary filtered stochastic process, are considered. Results show that all solutions obtained considering also the mass of the TMD as design variable are more efficient if compared with those obtained without it. However, in many cases these solutions are inappropriate because the optimal TMD mass is greater than real admissible values in practical technical applications for civil and mechanical engineering. Anyway, one can deduce that there are some interesting indications for applications in some actual contexts. In fact, the results show that there are some ranges of environmental parameters ranges where results attained by the displacement criterion are compatible with real applications requiring some percent of main system mass. Finally, the present research gives promising indications for complete TMD optimization application in emerging technical contexts, as micro- mechanical devices and nano resonant beam

Experimental study of an artificial groundwater recharging process

n/

Resonant photoelectron spectroscopy on CoO

Resonant photoelectron spectroscopy data from in situ cleaved CoO single crystals are presented. Valence band data collected at photon energies corresponding to Co 2p3/2 are discussed in comparison with a cluster model calculation and quantitative estimates of the model parameters are given. No valence band resonance is observed at the O 1s absorption threshold but the similarity between the observed Auger lines and those previously observed for NiO confirm the similarity between the O valence band states in the two materials

Seismic isolation of buildings using composite foundations based on metamaterials

Metamaterials can be engineered to interact with waves in entirely new ways, finding application on the nanoscale in various fields such as optics and acoustics. In addition, acoustic metamaterials can be used in large-scale experiments for filtering and manipulating seismic waves (seismic metamaterials). Here, we propose seismic isolation based on a device that combines some properties of seismic metamaterials (e.g., periodic mass-in-mass systems) with that of a standard foundation positioned right below the building for isolation purposes. The concepts on which this solution is based are the local resonance and a dual-stiffness structure that preserves large (small) rigidity for compression (shear) effects. In other words, this paper introduces a different approach to seismic isolation by using certain principles of seismic metamaterials. The experimental demonstrator tested on the laboratory scale exhibits a spectral bandgap that begins at 4.5 Hz. Within the bandgap, it filters more than 50% of the sei..

ADVANCED DEEP LEARNING COMPARISONS FOR NON-INVASIVE TUNNEL LINING ASSESSMENT FROM GROUND PENETRATING RADAR PROFILES

Innovative, automated, and non-invasive techniques have been developed by scientific community to indirectly assess structural conditions and support the decision-making process for a worthwhile maintenance schedule. Nowadays, machine learning tools are in the spotlight because of their outstanding capabilities to deal with data coming from even heterogeneous sources and their ability to extract information from the structural systems, providing highly effective, reliable, and efficient damage classification tools. In the current study, a supervised multi-level damage classification strategy has been developed regarding Ground Penetrating Radar (GPR) profiles for the assessment of tunnel lining conditions. In previous research, the authors firstly considered a convolutional neural network (CNN), adopting the quite popular ResNet-50, initialized through transfer learning. In the present work, further enhancements have been attempted by adopting two configurations of the newest state-of-art advanced neural architectures: the neural transformers. The foremost is the original Vision Transformer (ViT), whose core is an encoder entirely based on the innovative self-attention mechanism and does not rely on convolution at all. The second is an improvement of ViT which merges convolution and self-attention, the Compact Convolution Transformer (CCT). In conclusion, a critical discussion of the different pros and cons of adopting the above-mentioned different architectures is finally provided, highlighting the actual powerfulness of these technologies in the future civil engineering paradigm nevertheless

numerical modelling of breaker depth index

The breaker depth index, γb, is commonly used to determine the wave height to water depth ratio where the wave will break (Horikawa, 1988). In the present study, γb has been calculated using a fully nonlinear Boussinesq Type Equations (BTE) wave model with implemented BCI (Breaking Celerity Index). The BCI is a phase-resolving type breaking criterion for calculating the incipient wave breaking conditions (D’Alessandro and Tomasicchio, 2008). The model suitability in predicting γb has been verified against physical data from an experimental investigation conducted with incident regular waves propagating along uniform 1:20 and 1:50 slope beaches (G.V. dos Reis, 1992), and estimates of γb from five existing empirical formulae (Battjes, 1974; Ostendorf and Madsen, 1979; Singamsetti and Wind, 1980; Smith and Kraus, 1990; Goda, 2010). The comparisons showed that BCI presents a better agreement with the physical data with respect to the other investigated formulae in determining the value of γb, independently from the breaker type. In addition, the verification of the BCI in determining γb has been extended to the observed data from a large-scale laboratory experiment on wave hydrodynamics performed over a fixed-bed barred beach (Tomasicchio and Sancho, 2002)

Voltage control of nuclear spin in ferromagnetic Schottky diodes

We employ optical pump-probe spectroscopy to investigate the voltage dependence of spontaneous electron and nuclear spin polarizations in hybrid MnAs/n-GaAs and Fe/n-GaAs Schottky diodes. Through the hyperfine interaction, nuclear spin polarization that is imprinted by the ferromagnet acts on conduction electron spins as an effective magnetic field. We demonstrate tuning of this nuclear field from <0.05 to 2.4 kG by varying a small bias voltage across the MnAs device. In addition, a connection is observed between the diode turn-on and the onset of imprinted nuclear polarization, while traditional dynamic nuclear polarization exhibits relatively little voltage dependence.Comment: Submitted to Physical Review B Rapid Communications. 15 pages, 3 figure

Electronic structure investigation of CeB6 by means of soft X-ray scattering

The electronic structure of the heavy fermion compound CeB6 is probed by resonant inelastic soft X-ray scattering using photon energies across the Ce 3d and 4d absorption edges. The hybridization between the localized 4f orbitals and the delocalized valence-band states is studied by identifying the different spectral contributions from inelastic Raman scattering and normal fluorescence. Pronounced energy-loss structures are observed below the elastic peak at both the 3d and 4d thresholds. The origin and character of the inelastic scattering structures are discussed in terms of charge-transfer excitations in connection to the dipole allowed transitions with 4f character. Calculations within the single impurity Anderson model with full multiplet effects are found to yield consistent spectral functions to the experimental data.Comment: 9 pages, 4 figures, 1 table, http://link.aps.org/doi/10.1103/PhysRevB.63.07510