5,980 research outputs found
Pathway of phytate dephosphorylation by β-propeller phytases of different origins
Using a combination of high-performance ion chromatography analysis and kinetic studies, the pathway of myo-inositol hexakisphosphate dephosphorylation by the P-propeller phytase of Shewanella oneidensis was established, which was then compared with that of Bacillus subtilis 168, Bacillus amyloliquefaciens ATCC 15841, and B. amyloliquefaciens 45 β-propeller phytases. The data demonstrate that all of these β-propeller phytases dephosphorylate myo-inositol hexakisphosphate in a stereospecific way by sequential removal of phosphate groups via D-Ins(1,2,4,5,6)P 5, Ins(2,4,5,6)P 4 to finally Ins(2,4,6)P 3. Thus, the β-propeller phytases prefer the hydrolysis of every second phosphate over that of adjacent ones. This finding does not support previous phytate degradation models proposed by J. Kerovuo, J. Rouvinen, and F. Hatzack (2000. Biochem. J. 352: 623-628) and R. Greiner, A. Farouk, M. Larsson Alminger, and N.G. Carlsson (2002. Can. J. Microbiol. 48: 986-994), but seems to fit with the structural model given by S. Shin, N.C. Ha, B.C. Oh, T.K. Oh, and B.H. Oh (2001. Structure, 9: 851-858). © 2007 NRC.published_or_final_versio
Restoration of Liquid Effluent from Oil Palm Agroindustry in Malaysia using UV/TiO2 and UV/ZnO Photocatalytic Systems: A Comparative Study
In this study, we have employed a photocatalytic method to restore the liquid effluent from a palm oil mill in Malaysia. Specifically, the performance of both TiO2 and ZnO was compared for the photocatalytic polishing of palm oil mill effluent (POME). The ZnO photocatalyst has irregular shape, bigger in particle size but smaller BET specific surface area (9.71 m2/g) compared to the spherical TiO2 photocatalysts (11.34 m2/g). Both scavenging study and post-reaction FTIR analysis suggest that the degradation of organic pollutant in the TiO2 system has occurred in the bulk solution. In contrast, it is necessary for organic pollutant to adsorb onto the surface of ZnO photocatalyst, before the degradation took place. In addition, the reactivity of both photocatalysts differed in terms of mechanisms, photocatalyst loading and also the density of photocatalysts. From the stability test, TiO2 was found to offer higher stability, as no significant deterioration in activity was observed after three consecutive cycles. On the other hand, ZnO lost around 30% of its activity after the 1st-cycle of photoreaction. The pH studies showed that acidic environment did not improve the photocatalytic degradation of the POME, whilst in the basic environment, the reaction media became cloudy. In addition, longevity study also showed that the TiO2 was a better photocatalyst compared to the ZnO (74.12%), with more than 80.0% organic removal after 22 h of UV irradiation
Structural Color 3D Printing By Shrinking Photonic Crystals
The rings, spots and stripes found on some butterflies, Pachyrhynchus
weevils, and many chameleons are notable examples of natural organisms
employing photonic crystals to produce colorful patterns. Despite advances in
nanotechnology, we still lack the ability to print arbitrary colors and shapes
in all three dimensions at this microscopic length scale. Commercial nanoscale
3D printers based on two-photon polymerization are incapable of patterning
photonic crystal structures with the requisite ~300 nm lattice constant to
achieve photonic stopbands/ bandgaps in the visible spectrum and generate
colors. Here, we introduce a means to produce 3D-printed photonic crystals with
a 5x reduction in lattice constants (periodicity as small as 280 nm), achieving
sub-100-nm features with a full range of colors. The reliability of this
process enables us to engineer the bandstructures of woodpile photonic crystals
that match experiments, showing that observed colors can be attributed to
either slow light modes or stopbands. With these lattice structures as 3D color
volumetric elements (voxels), we printed 3D microscopic scale objects,
including the first multi-color microscopic model of the Eiffel Tower measuring
only 39-microns tall with a color pixel size of 1.45 microns. The technology to
print 3D structures in color at the microscopic scale promises the direct
patterning and integration of spectrally selective devices, such as photonic
crystal-based color filters, onto free-form optical elements and curved
surfaces
Anti-tumor efficacy of recombinant human arginase in combination with chemotherapeutic agents in human hepatocellular carcinoma
Poster Session 1: Translational & Clinical: no.41published_or_final_versionThe 16th Annual Research Conference of the Department of Medicine, The University of Hong Kong, Hong Kong, 22 January 2011. In Hong Kong Medical Journal, 2011, v. 17, suppl. 1, p. 23, abstract no. 2
Image similarity in medical images
Recent experiments have indicated a strong influence of the substrate grain orientation on the self-ordering in anodic porous alumina. Anodic porous alumina with straight pore channels grown in a stable, self-ordered manner is formed on (001) oriented Al grain, while disordered porous pattern is formed on (101) oriented Al grain with tilted pore channels growing in an unstable manner. In this work, numerical simulation of the pore growth process is carried out to understand this phenomenon. The rate-determining step of the oxide growth is assumed to be the Cabrera-Mott barrier at the oxide/electrolyte (o/e) interface, while the substrate is assumed to determine the ratio β between the ionization and oxidation reactions at the metal/oxide (m/o) interface. By numerically solving the electric field inside a growing porous alumina during anodization, the migration rates of the ions and hence the evolution of the o/e and m/o interfaces are computed. The simulated results show that pore growth is more stable when β is higher. A higher β corresponds to more Al ionized and migrating away from the m/o interface rather than being oxidized, and hence a higher retained O:Al ratio in the oxide. Experimentally measured oxygen content in the self-ordered porous alumina on (001) Al is indeed found to be about 3% higher than that in the disordered alumina on (101) Al, in agreement with the theoretical prediction. The results, therefore, suggest that ionization on (001) Al substrate is relatively easier than on (101) Al, and this leads to the more stable growth of the pore channels on (001) Al
Experimental evaluation and empirical modelling of palm oil mill effluent steam reforming
The current work describes a novel application of steam reforming process to treat palm oilmill effluent (POME), whilst co-generating H2-rich syngas from the treatment itself. The effects of reaction temperature, partial pressure of POME and gas-hourly-space-velocity (GHSV) were determined. High crystallinity 20 wt%Ni/80 wt%Al2O3 catalyst with smooth surface was prepared via impregnation method. Baseline runs revealed that the prepared catalyst was highly effective in destructing organic compounds, with a two-fold enhancement observed in the presence of 20 wt% Ni/80 wt%Al2O3 catalyst, despite its low specific surface area (2.09 m2 g−1). In addition, both the temperature and partial pressure of POME abet the COD reduction. Consequently, the highest COD reduction of 99.7% was achieved, with a final COD level of 73 ± 5 ppm from 27,500 ppm, at GHSV of 40,000 mL/h.gcat and partial pressure of POME equivalent to 95 kPa at 1173 K. In terms of gaseous products, H2 was found to be the major component, with selectivity ranged 51.0%–70.9%, followed by CO2(17.7%–34.1%), CO (7.7%–18.4%) and some CH4 (0.6%–3.3%). Furthermore, quadratic models with high R2-values were developed
Fusion with stem cell makes the hepatocellular carcinoma cells similar to liver tumor-initiating cells
published_or_final_versio
Novel design of a soft lightweight pneumatic continuum robot arm with decoupled variable stiffness and positioning
Soft robot arms possess unique capabilities when it comes to adaptability, flexibility and dexterity. In addition, soft systems that are pneumatically actuated can claim high power to weight ratio. One of the main drawbacks of pneumatically actuated soft arms is that their stiffness cannot be varied independently from their end-effector position in space. The novel robot arm physical design presented in this paper successfully decouples its end-effector positioning from its stiffness. An experimental characterisation of this ability is coupled with a mathematical analysis. The arm combines the light weight, high payload to weight ratio and robustness of pneumatic actuation with the adaptability and versatility of variable stiffness. Light weight is a vital component of the inherent safety approach to physical human-robot interaction. In order to characterise the arm, a neural network analysis of the curvature of the arm for different input pressures is performed. The curvature-pressure relationship is also characterised experimentally
Asymptomatic members with SOD1 mutation in a large kindred with familial amyotrophic lateral sclerosis have abnormal water diffusion characterisitcs
DTI was carried out in FALS/SALS patients and familial members with SOD1 mutation (AFALS) who may be in a pre-symptomatic phase of ALS. The
changes in FA and TT were investigated in CBT/CST and in whole brain. In FALS/SALS, diffusion pattern changes were found in cerebral peduncle,
internal capsule, sub-cortical white matter, cerebellum and frontal lobe while in AFALS, abnormal pattern could also be detected in the cerebral peduncle,
cerebellum and frontal lobe but with a smaller extent. Our study indicates that DTI can show early diffusion changes in members with SOD1 mutation in
FALS prior to symptom-onset.published_or_final_versio
- …