The particle carriers of field-aligned currents in the Earth's magnetotail during a substorm

Although the particle carriers of field-aligned currents (FACs) in the Earth's magnetotail play an important role in the transfer of momentum and energy between the solar wind, magnetosphere, and ionosphere, the characteristics of the FAC carriers have been poorly understood. Taking advantage of multiinstrument magnetic field and plasma data collected by the four spacecraft of the Cluster constellation as they traversed the northern plasma sheet boundary layer in the magnetotail on 14 September 2004, we identified the species type and energy range of the FAC carriers for the first time. The results indicate that part of tailward FACs is carried by energetic keV ions, which are probably originated from the ionosphere through outflow, and they are not too small (~2 nA/m2) to be ignored. The earthward (tailward) FACs are mainly carried by the dominant tailward (earthward) motion of electrons, and higher-energy electrons (from ~0.5 to 26 keV) are the main carriers

Impact of the solar wind dynamic pressure on the field‐aligned currents in the magnetotail: Cluster observation

We statistically investigate the influence of the solar wind dynamic pressure (SW Pdyn) on the field-aligned currents (FACs) in the magnetotail with 1492 FAC cases from July to October in 2001 and 2004, which covers 74 Cluster crossings of the plasma sheet boundary layer (PSBL) in both storm time and non-storm time. The FAC density in the magnetotail is derived from the magnetic field data with the four-point measurement of Cluster, and the SW Pdyn is taken from ACE data. The results indicate the FAC density becomes stronger with increasing SW Pdyn. The statistics show that the FAC occurrence increased monotonically with SW Pdyn in the three levels (Weak: SW Pdyn5 nPa). The FAC density increased with increasing SW Pdyn, while its footprint (invariant latitude, ILAT) in the polar region decreased with increasing SW Pdyn. The response of the FAC to SW Pdyn in the magnetotail had a north-south hemispheric asymmetry. The FAC density had a better correlation with SW Pdyn in the Northern hemisphere, while the footprint had a better correlation with SW Pdyn in the Southern hemisphere. Possible underlying mechanisms for our results are analyzed and discussed. However, it requires more observations and simulation studies to find out the mechanism of north-south asymmetry

Pseudo-static tests of terminal stirrup-confined concrete-filled rectangular steel tubular columns

© 2017 Elsevier Ltd This paper mainly presents a pseudo-static test program on 12 terminal stirrup-confined square concrete-filled steel tube (SCFT) columns and 14 rectangular SCFT columns under constant axial pressure. The effects of various factors on the hysteretic behavior of specimens are investigated. These factors include with or without stirrups, height of terminal stirrup region, equivalent stirrup ratio, stirrup form, loading direction, height-length ratio (L/B), length-width ratio (B/D), axial compression ratio (n) and sliding support. The failure mode, strain ratio, hysteretic curve, skeleton curve, ultimate bearing capacity, ductility, stiffness degradation, energy dissipation, as well as the residual deformation of the specimens are analyzed. The results indicate that: (1) When n is relatively larger, the bidirectional stirrups can effectively delay the local buckling of steel tube and greatly increase the ultimate bearing capacity, stiffness, equivalent damping viscosity index, residual deformation rate and ductility index, and further significantly improve the seismic behavior of the rectangular SCFT columns; (2) Axial pressure can improve the confinement effect from the steel tube to the core concrete, also bidirectional stirrups can directly confine the core concrete to decrease strain ratio of the steel tube; (3) With the same value of n, increasing the height of terminal stirrup region or increasing the equivalent stirrup ratio can effectively improve the seismic behavior of the rectangular SCFT columns; (4) The influence of loading direction, L/B and B/D on the ductility of rectangular SCFT columns are not obvious

Near-Infrared Super Resolution Imaging with Metallic Nanoshell Particle Chain Array

We propose a near-infrared super resolution imaging system without a lens or a mirror but with an array of metallic nanoshell particle chain. The imaging array can plasmonically transfer the near-field components of dipole sources in the incoherent and coherent manners and the super resolution images can be reconstructed in the output plane. By tunning the parameters of the metallic nanoshell particle, the plasmon resonance band of the isolate nanoshell particle red-shifts to the near-infrared region. The near-infrared super resolution images are obtained subsequently. We calculate the field intensity distribution at the different planes of imaging process using the finite element method and find that the array has super resolution imaging capability at near-infrared wavelengths. We also show that the image formation highly depends on the coherence of the dipole sources and the image-array distance.Comment: 15 pages, 6 figure

SnO2Nanowire Arrays and Electrical Properties Synthesized by Fast Heating a Mixture of SnO2and CNTs Waste Soot

SnO2nanowire arrays were synthesized by fast heating a mixture of SnO2and the carbon nanotubes waste soot by high-frequency induction heating. The resultant SnO2nanowires possess diameters from 50 to 100 nm and lengths up to tens of mircrometers. The field-effect transistors based on single SnO2nanowire exhibit that as-synthesized nanowires have better transistor performance in terms of transconductance and on/off ratio. This work demonstrates a simple technique to the growth of nanomaterials for application in future nanoelectronic devices

The generalized Hamiltonian model for the shafting transient analysis of the hydro turbine generating sets.

yesTraditional rotor dynamics mainly focuses on the steady- state behavior of the rotor and shafting. However, for systems such as hydro turbine generating sets (HTGS) where the control and regulation is frequently applied, the shafting safety and stabilization in transient state is then a key factor. The shafting transient state inevitably involves multiparameter domain, multifield coupling, and coupling dynamics. In this paper, the relative value form of the Lagrange function and its equations have been established by defining the base value system of the shafting. Takingthe rotation angle and the angular speed of the shafting as a link, the shafting lateral vibration and generator equations are integrated into the framework of generalized Hamiltonian system. The generalized Hamiltonian control model is thus established. To make the model more general, additional forces of the shafting are taken as the input excitation in proposed model. The control system of the HTGS can be easily connected with the shafting model to form the whole simulation system of the HTGS. It is expected that this study will build a foundation for the coupling dynamics theory using the generalized Hamiltonian theory to investigate coupling dynamic mechanism among the shafting vibration, transient of hydro turbine generating sets, and additional forces of the shafting.National Natural Science Foundation of China under Grant Nos. 51179079 and 5083900

Approaching the ideal elastic limit of metallic glasses

The ideal elastic limit is the upper bound to the stress and elastic strain a material can withstand. This intrinsic property has been widely studied for crystalline metals, both theoretically and experimentally. For metallic glasses, however, the ideal elastic limit remains poorly characterized and understood. Here we show that the elastic strain limit and the corresponding strength of submicron-sized metallic glass specimens are about twice as high as the already impressive elastic limit observed in bulk metallic glass samples, in line with model predictions of the ideal elastic limit of metallic glasses. We achieve this by employing an in situ transmission electron microscope tensile deformation technique. Furthermore, we propose an alternative mechanism for the apparent 'work hardening' behaviour observed in the tensile stress–strain curves

Genome-wide copy number variation study in anorectal malformations

Anorectal malformations (ARMs, congenital obstruction of the anal opening) are among the most common birth defects requiring surgical treatment (2-5/10 000 live-births) and carry significant chronic morbidity. ARMs present either as isolated or as part of the phenotypic spectrum of some chromosomal abnormalities or monogenic syndromes. The etiology is unknown. To assess the genetic contribution to ARMs, we investigated single-nucleotide polymorphisms and copy number variations (CNVs) at genome-wide scale. A total of 363 Han Chinese sporadic ARM patients and 4006 Han Chinese controls were included. Overall, we detected a 1.3-fold significant excess of rare CNVs in patients. Stratification of patients by presence/absence of other congenital anomalies showed that while syndromic ARM patients carried significantly longer rare duplications than controls (P = 0.049), non-syndromic patients were enriched with both rare deletions and duplications when compared with controls (P = 0.00031). Twelve chromosomal aberrations and 114 rare CNVs were observed in patients but not in 868 controls nor 11 943 healthy individuals from the Database of Genomic Variants. Importantly, these aberrations were observed in isolated ARM patients. Gene-based analysis revealed 79 genes interfered by CNVs in patients only. In particular, we identified a de novo DKK4 duplication. DKK4 is a member of the WNT signaling pathway which is involved in the development of the anorectal region. In mice, Wnt disruption results in ARMs. Our data suggest a role for rare CNVs not only in syndromic but also in isolated ARM patients and provide a list of plausible candidate genes for the disorder.postprin

Photodisintegration of 4^4He into p+t

The two-body photodisintegration of $^4$He into a proton and a triton has been studied using the CEBAF Large-Acceptance Spectrometer (CLAS) at Jefferson Laboratory. Real photons produced with the Hall-B bremsstrahlung-tagging system in the energy range from 0.35 to 1.55 GeV were incident on a liquid $^4$He target. This is the first measurement of the photodisintegration of $^4$He above 0.4 GeV. The differential cross sections for the $\gamma$$^4$He$\to pt$ reaction have been measured as a function of photon-beam energy and proton-scattering angle, and are compared with the latest model calculations by J.-M. Laget. At 0.6-1.2 GeV, our data are in good agreement only with the calculations that include three-body mechanisms, thus confirming their importance. These results reinforce the conclusion of our previous study of the three-body breakup of $^3$He that demonstrated the great importance of three-body mechanisms in the energy region 0.5-0.8 GeV .Comment: 13 pages submitted in one tgz file containing 2 tex file and 22 postscrip figure