88,291 research outputs found
Dynamic response and stability of a gas-lubricated Rayleigh-step pad
The quasi-static, pressure characteristics of a gas-lubricated thrust bearing with shrouded, Rayleigh-step pads are determined for a time-varying film thickness. The axial response of the thrust bearing to an axial forcing function or an axial rotor disturbance is investigated by treating the gas film as a spring having nonlinear restoring and damping forces. These forces are related to the film thickness by a power relation. The nonlinear equation of motion in the axial mode is solved by the Ritz-Galerkin method as well as the direct, numerical integration. Results of the nonlinear response by both methods are compared with the response based on the linearized equation. Further, the gas-film instability of an infinitely wide Rayleigh step thrust pad is determined by solving the transient Reynolds equation coupled with the equation of the motion of the pad. Results show that the Rayleigh-step geometry is very stable for bearing number A up to 50. The stability threshold is shown to exist only for ultrahigh values of Lambda equal to or greater than 100, where the stability can be achieved by making the mass heavier than the critical mass
Copying equations to assess mathematical competence: An evaluation of pause measures using graphical protocol analysis
Can mathematical competence be measured by analyzing the patterns of pauses between written elements in the freehand copying of mathematical equations? Twenty participants of varying levels of mathematical competence copied sets of equations and sequences of numbers on a graphics tablet. The third quartile of pauses is an effective measure, because it re- flects the greater number of chunks and the longer time spent per chunk by novices as they processed the equations. To compensate for individual differences in speeds of elementary operations and skill in writing basic mathematical symbols, variants on the measure were devised and tested
Presymmetry beyond the Standard Model
We go beyond the Standard Model guided by presymmetry, the discrete
electroweak quark-lepton symmetry hidden by topological effects which explain
quark fractional charges as in condense matter physics. Partners of the
particles of the Standard Model and the discrete symmetry associated with this
partnership appear as manifestations of a residual presymmetry and its
extension from matter to forces. This duplication of the spectrum of the
Standard Model keeps spin and comes nondegenerated about the TeV scale.Comment: 6 pages, 11 figures. To be published in the proceedings of DPF-2009,
Detroit, MI, July 2009, eConf C09072
Observed strategies in the freehand drawing of complex hierarchical diagrams
Chunk decomposition and assembly strategies have been found in the drawing of complex hierarchical diagrams (spe- cifically AVOW diagrams). Analysis of 40 diagrams pro- duced by five participants provided evidence for the strategies based on the duration of pauses between drawn elements. The strategies were initially discovered using a new visualiza- tion technique developed to allow the detailed examination of the sequential order of diagram drawing in conjunction with information about the durations of pauses associated with drawn elements
A similarity law for stressing rapidly heated thin-walled cylinders
When a thin cylindrical shell of uniform thickness is very rapidly heated by hot high-pressure gas flowing inside the shell, the temperature of material decreases steeply from a high temperature at the inside surface to ambient temperatures at the outside surface. Young's modulus of material thus varies. The purpose of the present paper is to reduce the problem of stress analysis of such a cylinder to an equivalent problem in conventional cylindrical shell without temperature gradient in the wall. The equivalence concept is expressed as a series of relations between the quantities for the hot cylinder and the quantities for the cold cylinder. These relations give the similarity law whereby strains for the hot cylinder can be simply deduced from measured strains on the cold cylinder and thus greatly simplify the problem of experimental stress analysis
Collective Quartics and Dangerous Singlets in Little Higgs
Any extension of the standard model that aims to describe TeV-scale physics
without fine-tuning must have a radiatively-stable Higgs potential. In little
Higgs theories, radiative stability is achieved through so-called collective
symmetry breaking. In this letter, we focus on the necessary conditions for a
little Higgs to have a collective Higgs quartic coupling. In one-Higgs doublet
models, a collective quartic requires an electroweak triplet scalar. In
two-Higgs doublet models, a collective quartic requires a triplet or singlet
scalar. As a corollary of this study, we show that some little Higgs theories
have dangerous singlets, a pathology where collective symmetry breaking does
not suppress quadratically-divergent corrections to the Higgs mass.Comment: 4 pages; v2: clarified the existing literature; v3: version to appear
in JHE
Solvability and regularity for an elliptic system prescribing the curl, divergence, and partial trace of a vector field on Sobolev-class domains
We provide a self-contained proof of the solvability and regularity of a
Hodge-type elliptic system, wherein the divergence and curl of a vector field
are prescribed in an open, bounded, Sobolev-class domain, and either the normal
component or the tangential components of the vector field are prescribed on
the boundary. The proof is based on a regularity theory for vector elliptic
equations set on Sobolev-class domains and with Sobolev-class coefficients.Comment: 49 Pages, improved exposition and corrected typo
A computer solution for the dynamic load, lubricant film thickness and surface temperatures in spiral bevel gears
A complete analysis of spiral bevel gear sets is presented. The gear profile is described by the movements of the cutting tools. The contact patterns of the rigid body gears are investigated. The tooth dynamic force is studied by combining the effects of variable teeth meshing stiffness, speed, damping, and bearing stiffness. The lubrication performance is also accomplished by including the effects of the lubricant viscosity, ambient temperature, and gear speed. A set of numerical results is also presented
A computer solution for the dynamic load, lubricant film thickness, and surface temperatures in spiral-bevel gears
A computer method for determining the dynamic load between spiral bevel pinion and gear teeth contact along the path of contact is described. The dynamic load analysis governs both the surface temperature and film thickness. Computer methods for determining the surface temperature, and film thickness are presented along with results obtained for a pair of typical spiral bevel gears
- …