Visible and Ultraviolet Laser Spectroscopy of ThF

The molecular ion ThF$^+$ is the species to be used in the next generation of search for the electron's Electric Dipole Moment (eEDM) at JILA. The measurement requires creating molecular ions in the eEDM sensitive state, the rovibronic ground state $^3\Delta_1$, $v^+=0$, $J^+=1$. Survey spectroscopy of neutral ThF is required to identify an appropriate intermediate state for a Resonance Enhanced Multi-Photon Ionization (REMPI) scheme that will create ions in the required state. We perform broadband survey spectroscopy (from 13000 to 44000~cm$^{-1}$) of ThF using both Laser Induced Fluorescence (LIF) and $1+1'$ REMPI spectroscopy. We observe and assign 345 previously unreported vibronic bands of ThF. We demonstrate 30\% efficiency in the production of ThF$^+$ ions in the eEDM sensitive state using the $\Omega = 3/2$ [32.85] intermediate state. In addition, we propose a method to increase the aforementioned efficiency to $\sim$100\% by using vibrational autoionization via core-nonpenetrating Rydberg states, and discuss theoretical and experimental challenges. Finally, we also report 83 vibronic bands of an impurity species, ThO.Comment: 49 pages, 7 figure

Self-assembly of Fmoc-tetrapeptides based on the RGDS cell adhesion motif

Self-assembly in aqueous solution has been investigated for two Fmoc [Fmoc ¼ N-(fluorenyl)-9-methoxycarbonyl] tetrapeptides comprising the RGDS cell adhesion motif from fibronectin or the scrambled sequence GRDS. The hydrophobic Fmoc unit confers amphiphilicity on the molecules, and introduces aromatic stacking interactions. Circular dichroism and FTIR spectroscopy show that the self-assembly of both peptides at low concentration is dominated by interactions among Fmoc units, although Fmoc-GRDS shows b-sheet features, at lower concentration than Fmoc-RGDS. Fibre X-ray diffraction indicates b-sheet formation by both peptides at sufficiently high concentration. Strong alignment effects are revealed by linear dichroism experiments for Fmoc-GRDS. Cryo-TEM and smallangle X-ray scattering (SAXS) reveal that both samples form fibrils with a diameter of approximately 10 nm. Both Fmoc-tetrapeptides form self-supporting hydrogels at sufficiently high concentration. Dynamic shear rheometry enabled measurements of the moduli for the Fmoc-GRDS hydrogel, however syneresis was observed for the Fmoc-RGDS hydrogel which was significantly less stable to shear. Molecular dynamics computer simulations were carried out considering parallel and antiparallel b-sheet configurations of systems containing 7 and 21 molecules of Fmoc-RGDS or Fmoc-GRDS, the results being analyzed in terms of both intermolecular structural parameters and energy contributions

An Energy-Efficient ECC Processor of UHF RFID Tag for Banknote Anti-Counterfeiting

In this paper, we present the design and analysis of an energy-efficient 163-b elliptic curve cryptographic (ECC) processor suitable for passive ultrahigh frequency (UHF) radio frequency identification (RFID) tags that are usable for banknote authentication and anti-counterfeiting. Even partial public key cryptographic functionality has long been thought to consume too much power and to be too slow to be usable in passive UHF RFID systems. Utilizing a low-power design strategy with optimized register file management and an architecture based on the López-Dahab Algorithm, we designed a low-power ECC processor that is used with a modified ECC-DH authentication protocol. The ECC-DH authentication protocol is compatible with the ISO/IEC 18000-63 (“Gen2”) passive UHF RFID protocol. The ECC processor requires 12 145 gate equivalents. The ECC processor consumes 5.04 nJ/b at a frequency of 960 kHz when implemented in a 0.13-μm standard CMOS process. The tag identity authentication function requires 30 600 cycles to complete all scalar multiplication operations. This size, speed, and power of the ECC processor makes it practical to use within a passive UHF RFID tag and achieve up to 1500 banknote authentications per minute, which is sufficient for use in the fastest banknote counting machines

Mercury Orbiter: Report of the Science Working Team

The results are presented of the Mercury Orbiter Science Working Team which held three workshops in 1988 to 1989 under the auspices of the Space Physics and Planetary Exploration Divisions of NASA Headquarters. Spacecraft engineering and mission design studies at the Jet Propulsion Lab were conducted in parallel with this effort and are detailed elsewhere. The findings of the engineering study, summarized herein, indicate that spin stabilized spacecraft carrying comprehensive particles and fields experiments and key planetology instruments in high elliptical orbits can survive and function in Mercury orbit without costly sun shields and active cooling systems

Community Seismic Network

The article describes the design of the Community Seismic Network, which is a dense open seismic network based on low cost sensors. The inputs are from sensors hosted by volunteers from the community by direct connection to their personal computers, or through sensors built into mobile devices. The server is cloud-based for robustness and to dynamically handle the load of impulsive earthquake events. The main product of the network is a map of peak acceleration, delivered within seconds of the ground shaking. The lateral variations in the level of shaking will be valuable to first responders, and the waveform information from a dense network will allow detailed mapping of the rupture process. Sensors in buildings may be useful for monitoring the state-of-health of the structure after major shaking

Multiple functional neurosteroid binding sites on GABAA receptors

Neurosteroids are endogenous modulators of neuronal excitability and nervous system development and are being developed as anesthetic agents and treatments for psychiatric diseases. While gamma amino-butyric acid Type A (GABAA) receptors are the primary molecular targets of neurosteroid action, the structural details of neurosteroid binding to these proteins remain ill defined. We synthesized neurosteroid analogue photolabeling reagents in which the photolabeling groups were placed at three positions around the neurosteroid ring structure, enabling identification of binding sites and mapping of neurosteroid orientation within these sites. Using middle-down mass spectrometry (MS), we identified three clusters of photolabeled residues representing three distinct neurosteroid binding sites in the human α1β3 GABAA receptor. Novel intrasubunit binding sites were identified within the transmembrane helical bundles of both the α1 (labeled residues α1-N408, Y415) and β3 (labeled residue β3-Y442) subunits, adjacent to the extracellular domains (ECDs). An intersubunit site (labeled residues β3-L294 and G308) in the interface between the β3(+) and α1(-) subunits of the GABAA receptor pentamer was also identified. Computational docking studies of neurosteroid to the three sites predicted critical residues contributing to neurosteroid interaction with the GABAA receptors. Electrophysiological studies of receptors with mutations based on these predictions (α1-V227W, N408A/Y411F, and Q242L) indicate that both the α1 intrasubunit and β3-α1 intersubunit sites are critical for neurosteroid action

Dipole-field-assisted charge extraction in metal-perovskite-metal back-contact solar cells

Hybrid organic-inorganic halide perovskites are low-cost solution-processable solar cell materials with photovoltaic properties that rival those of crystalline silicon. The perovskite films are typically sandwiched between thin layers of hole and electron transport materials, which efficiently extract photogenerated charges. This affords high-energy conversion efficiencies but results in significant performance and fabrication challenges. Herein we present a simple charge transport layer-free perovskite solar cell (PSC), comprising only a perovskite layer with two interdigitated gold back-contacts. Charge extraction is achieved via self-assembled molecular monolayers (SAMs) and their associated dipole fields at the metal/perovskite interface. Photovoltages of approximately 600 mV generated by SAM-modified PSCs are equivalent to the built-in potential generated by individual dipole layers. Efficient charge extraction results in photocurrents of up to 12.1 mA/cm2 under simulated sunlight, despite a large electrode spacing.Comment: 18 pages, 5 figure

Real-Time Feature Tracking Using Homography

This software finds feature point correspondences in sequences of images. It is designed for feature matching in aerial imagery. Feature matching is a fundamental step in a number of important image processing operations: calibrating the cameras in a camera array, stabilizing images in aerial movies, geo-registration of images, and generating high-fidelity surface maps from aerial movies. The method uses a Shi-Tomasi corner detector and normalized cross-correlation. This process is likely to result in the production of some mismatches. The feature set is cleaned up using the assumption that there is a large planar patch visible in both images. At high altitude, this assumption is often reasonable. A mathematical transformation, called an homography, is developed that allows us to predict the position in image 2 of any point on the plane in image 1. Any feature pair that is inconsistent with the homography is thrown out. The output of the process is a set of feature pairs, and the homography. The algorithms in this innovation are well known, but the new implementation improves the process in several ways. It runs in real-time at 2 Hz on 64-megapixel imagery. The new Shi-Tomasi corner detector tries to produce the requested number of features by automatically adjusting the minimum distance between found features. The homography-finding code now uses an implementation of the RANSAC algorithm that adjusts the number of iterations automatically to achieve a pre-set probability of missing a set of inliers. The new interface allows the caller to pass in a set of predetermined points in one of the images. This allows the ability to track the same set of points through multiple frames