2,896 research outputs found
Shakedown and creep rupture assessment of a header branch pipe using the Linear Matching Method
Many power plant components are subject to combined mechanical and thermal loading conditions during their operating lifetime. It is important that potential failure mechanisms of such components are extensively investigated in order to ensure sufficient confidence in their reliability. This paper presents shakedown and creep rupture analyses of a header branch pipe subjected to cyclic thermo-mechanical loading performed using the Linear Matching Method (LMM). The detailed investigation of failure mechanisms under the combined action of the internal pressure and the cyclic thermal load due to the temperature difference between the inner and outer pipe surfaces will be the primary focus of this paper. The header branch pipe considered here is composed of a single material with properties that are dependent upon both temperature and rupture life. A novel study investigating the effect that two geometric parameters ā branch diameter and separation ā have upon the failure mechanisms of the header branch pipe has also been carried out. The impact that these geometric parameters have upon the limit load, shakedown and creep rupture limits is one of the principal areas that is investigated in this work. In addition to this, an understanding of the dependency of the creep rupture limit upon the defined time to creep rupture is also studied. Verification of these results is then given by full elastic-plastic analyses performed within ABAQUS
Goal-based structuring in a recommender systems
Recommender systems help people to find information that is interesting to them. However, current recommendation techniques only address the user's short-term and long-term interests, not their immediate interests. This paper describes a method to structure information (with or without using recommendations) taking into account the users' immediate interests: a goal-based structuring method. Goal-based structuring is based on the fact that people experience certain gratifications from using information, which should match with their goals. An experiment using an electronic TV guide shows that structuring information using a goal-based structure makes it easier for users to find interesting information, especially if the goals are used explicitly; this is independent of whether recommendations are used or not. It also shows that goal-based structuring has more influence on how easy it is for users to find interesting information than recommendations
Monotonicity and logarithmic convexity relating to the volume of the unit ball
Let stand for the volume of the unit ball in for
. In the present paper, we prove that the sequence
is logarithmically convex and that the sequence
is strictly
decreasing for . In addition, some monotonic and concave properties of
several functions relating to are extended and generalized.Comment: 12 page
Preparation and ferroelectric properties of (124)-oriented SrBi4Ti4O15 ferroelectric thin film on (110)-oriented LaNiO3 electrode
A (124)-oriented SrBi4Ti4O15 (SBTi) ferroelectric thin film with high volume
fraction of {\alpha}SBTi(124)=97% was obtained using a metal organic
decomposition process on SiO2/Si substrate coated by (110)-oriented LaNiO3
(LNO) thin film. The remanent polarization and coercive field for
(124)-oriented SBTi film are 12.1 {\mu}C/cm2 and 74 kV/cm, respectively. No
evident fatigue of (124)-oriented SBTi thin film can be observed after
1{\times}10e9 switching cycles. Besides, the (124)-oriented SBTi film can be
uniformly polarized over large areas using a piezoelectric-mode atomic force
microscope. Considering that the annealing temperature was 650{\deg}C and the
thickness of each deposited layer was merely 30 nm, a long-range epitaxial
relationship between SBTi(124) and LNO(110) facets was proposed. The epitaxial
relationship was demonstrated based on the crystal structures of SBTi and LNO.Comment: 11 pages, 4 figures, published in Journal of Materials Science:
Materials in Electronics (JMSE), 19 (2008), 1031-103
Species reintroduction and community-level consequences in dynamically simulated ecosystems
Global biodiversity, and its associated ecosystem services, are threatened due to species extinctions. Reintroducing locally extinct species may be a partial solution to this problem. However, the success and possible consequences of any artificial reintroduction will depend on its ecological community, and the reaction of that community to the species' extinction and reintroduction. Mathematical models can offer useful insights by identifying the key features of communities and reintroduced species most likely to result in successful reintroductions. Here we simulated extinctions and reintroductions for a range of theoretical food webs generated using an established bioenergetics model. This allows the probability of successful reintroductions to be quantified as a function of two important ecological factors: the connectance of the food web, and of the time between extinctions and reintroductions. Reintroduction success is measured across an ensemble of 1796 simulated communities, with connnectances of 0.05, 0.15 and 0.3, using three criteria: presence of the reintroduced species in the final community, unchanged species richness in the final community compared to the pre-extinction persistent community and the complete restoration of the community (including both species richness and equilibrium biomass distributions). Although only 12 reintroduced species fail to re-establish according to minimal criteria, the process of extinction and reintroduction frequently has a large effect on the community composition. Increasing time to reintroduction increases both the probability of species loss, and equilibrium biomass change in the community. Proportionally, these community-level impacts occur more frequently when the reintroduced species is a primary producer or top predator. These results indicate that ignoring broader measures of reintroduction success could seriously underestimate the impact of reintroductions on the ecological community. These quantitative results can be compared to empirical literature and may help reveal which factors are most important to the success of reintroductions
Resonant thermal transport in semiconductor barrier structures
I report that thermal single-barrier (TSB) and thermal double-barrier (TDB)
structures (formed, for example, by inserting one or two regions of a few Ge
monolayers in Si) provide both a suppression of the phonon transport as well as
a resonant-thermal-transport effect. I show that high-frequency phonons can
experience a traditional double-barrier resonant tunneling in the TDB
structures while the formation of Fabry-Perot resonances (at lower frequencies)
causes quantum oscillations in the temperature variation of both the TSB and
TDB thermal conductances and .Comment: 4 pages. 4 figure.
Control of a Movable Robot Head Using Vision-Based Object Tracking
This paper presents a visual tracking system to support the movement of the robot head for detecting the existence of objects. Object identification and object position estimation were conducted using image-based processing. The movement of the robot head was in four directions namelyĀ to the right, left, top, and bottom of the robot head. Based on the distance of the object, it shifted the object to many points to assess the accuracy of the process of tracking the object. The targeted objects are detected through several processes, namely normalization of RGB images, thresholding, and object marking. The process of tracking the object conducted by the robot head varied in 40 various object points with high accuracy. The further the objectās distance to the robot, the smaller the corner of the movement of the robot produced compared to the movement of the robot head to track an object that was closer even though with the same distance stimulant shift object. However, for the distance and the shift of the same object, the level of accuracy showed almost the same results. The results showed the movement of the robot head to track the object under the head of the robot produced the movement with a larger angular error compared to the movement of the robot head in another direction even though with the stimulant distance of the same object position and the distance shift of the same object
Heat transport of electron-doped Cobaltates
Within the t-J model, the heat transport of electron-doped cobaltates is
studied based on the fermion-spin theory. It is shown that the temperature
dependent thermal conductivity is characterized by the low temperature peak
located at a finite temperature. The thermal conductivity increases
monotonously with increasing temperature at low temperatures T 0.1, and
then decreases with increasing temperature for higher temperatures T
0.1, in qualitative agreement with experimental result observed from
NaCoO .Comment: 4 pages, 1 fig, corrected typos, accepted for publication in Commun.
Theor. Phy
Thermoelectrics Near the Mott Localization-Delocalization Transition
We give an overview on current status of the theoretical research on
Thermoelectricity for correlated materials. We derive the theoretical formulas
which become exact at low and high temperature and discuss the intermediate
temperature results. In particular, we show that within Dynamical Mean Field
Theory the low temperature sign of the thermopower is not necessary the same as
in LDA, and that significant non-universality is expected due to strong
correlations.Comment: appeared in "Properties and Applications of Thermoelectric
Materials", Edited by V. Zlatic and A.C. Hewson, Springe
Modeling radiation belt electron dynamics during GEM challenge intervals with the DREAM3D diffusion model
As a response to the Geospace Environment Modeling (GEM) āGlobal Radiation Belt Modeling Challenge,ā a 3D diffusion model is used to simulate the radiation belt electron dynamics during two intervals of the Combined Release and Radiation Effects
- ā¦