Self-Dual Conformal Supergravity and the Hamiltonian Formulation

In terms of Dirac matrices the self-dual and anti-self-dual decomposition of a conformal supergravity is given and a self-dual conformal supergravity theory is developed as a connection dynamic theory in which the basic dynamic variabes include the self-dual spin connection i.e. the Ashtekar connection rather than the triad. The Hamiltonian formulation and the constraints are obtained by using the Dirac-Bergmann algorithm. PACS numbers: 04.20.Cv, 04.20.Fy,04.65.+

Author Correction: Enhancing doping contrast and optimising quantification in the scanning electron microscope by surface treatment and Fermi level pinning

An amendment to this paper has been published and can be accessed via a link at the top of the paper

3 W of single-frequency output at 532 nm by intracavity frequency doubling of a diode-bar-pumped Nd:YAG ring laser 3 W of single-frequency output at 532 nm by intracavity frequency doubling of a diode-bar-pumped Nd:YAG ring laser

A beam-shaped 20W diode-bar has longitudinally pumped a Nd:YAG laser in a ring configuration. Unidirectional single-frequency operation is enforced by a Faraday rotator. Intracavity frequency doubling, using a KTP crystal has produced 3W of stable, single-frequency TEMoo output at 532nm

A Novel Non-Intrusive Method to Resolve the Thermal-Dome-Effect of Pyranometers: Radiometric Calibration and Implications

Traditionally the calibration equation for pyranometers assumes that the measured solar irradiance is solely proportional to the thermopile's output voltage; therefore only a single calibration factor is derived. This causes additional measurement uncertainties because it does not capture sufficient information to correctly account for a pyranometer's thermal effect. In our updated calibration equation, temperatures from the pyranometer's dome and case are incorporated to describe the instrument's thermal behavior, and a new set of calibration constants are determined, thereby reducing measurement uncertainties. In this paper, we demonstrate why a pyranometer's uncertainty using the traditional calibration equation is always larger than a-few-percent, but with the new approach can become much less than 1% after the thermal issue is resolved. The highlighted calibration results are based on NIST-traceable light sources under controlled laboratory conditions. The significance of the new approach lends itself to not only avoiding the uncertainty caused by a pyranometer's thermal effect but also the opportunity to better isolate and characterize other instrumental artifacts, such as angular response and non-linearity of the thermopile, to further reduce additional uncertainties. We also discuss some of the implications, including an example of how the thermal issue can potentially impact climate studies by evaluating aerosol's direct-radiative effect using field measurements with and without considering the pyranometer's thermal effect. The results of radiative transfer model simulation show that a pyranometer's thermal effect on solar irradiance measurements at the surface can be translated into a significant alteration of the calculated distribution of solar energy inside the column atmosphere

Electrospun nanofiber membranes as ultrathin flexible supercapacitors

A highly flexible electrochemical supercapacitor electrode was developed with a novel metal oxide-reinforced nanofiber electrode by utilizing a solution-based electrospinning technique. The facile fabrication steps involved the introduction of metal precursors into a polymeric solution, which was subjected to an in situ electrospinning process. The electrospun polymeric web with metallic ingredients was then subjected to an oxidative stabilization process that induced the formation of metal oxide nanoparticles within the polymer structure. Finally, the metal oxide nanoparticles incorporated with nanofibers were obtained using a carbonization process, thus converting the polymer backbones into a carbon-rich conductive nanofiber structure. The fabricated nanofibers were decorated and implanted with metal oxide nanoparticles that had a surface-decorated structure morphology due to the solubility of the precursors in the reaction solution. The electrochemical performance of the fabricated metal oxide reinforced with nanofiber electrodes was investigated as an electrochemical system, and the novel morphology significantly improved the specific capacitance compared to a pristine carbon nanofiber membrane. As a result of the uniform dispersion of metal oxide nanoparticles throughout the surface of the nanofibers, the overall capacitive behavior of the membrane was enhanced. Furthermore, a fabricated free-standing flexible device that utilized the optimized nanofiber electrode demonstrated high stability even after it was subjected to various bending operations and curvatures. These promising results showed the potential applications of these lightweight, conductive nanofiber electrodes in flexible and versatile electronic devices

Symmetric Hyperbolic System in the Self-dual Teleparallel Gravity

In order to discuss the well-posed initial value formulation of the teleparallel gravity and apply it to numerical relativity a symmetric hyperbolic system in the self-dual teleparallel gravity which is equivalent to the Ashtekar formulation is posed. This system is different from the ones in other works by that the reality condition of the spatial metric is included in the symmetric hyperbolicity and then is no longer an independent condition. In addition the constraint equations of this system are rather simpler than the ones in other works.Comment: 8 pages, no figure

COVID-19 Related Mobility Reduction: Heterogenous Effects on Sleep and Physical Activity Rhythms

Mobility restrictions imposed to suppress coronavirus transmission can alter physical activity (PA) and sleep patterns. Characterization of response heterogeneity and their underlying reasons may assist in tailoring customized interventions. We obtained wearable data covering baseline, incremental movement restriction and lockdown periods from 1824 city-dwelling, working adults aged 21 to 40 years, incorporating 206,381 nights of sleep and 334,038 days of PA. Four distinct rest activity rhythms (RARs) were identified using k-means clustering of participants' temporally distributed step counts. Hierarchical clustering of the proportion of time spent in each of these RAR revealed 4 groups who expressed different mixtures of RAR profiles before and during the lockdown. Substantial but asymmetric delays in bedtime and waketime resulted in a 24 min increase in weekday sleep duration with no loss in sleep efficiency. Resting heart rate declined 2 bpm. PA dropped an average of 38%. 4 groups with different compositions of RAR profiles were found. Three were better able to maintain PA and weekday/weekend differentiation during lockdown. The least active group comprising 51 percent of the sample, were younger and predominantly singles. Habitually less active already, this group showed the greatest reduction in PA during lockdown with little weekday/weekend differences. Among different mobility restrictions, removal of habitual social cues by lockdown had the largest effect on PA and sleep. Sleep and resting heart rate unexpectedly improved. RAR evaluation uncovered heterogeneity of responses to lockdown and can identify characteristics of persons at risk of decline in health and wellbeing.Comment: 30 pages, 3 main figures, 3 tables, 4 supplementary figure

Electro-exfoliating graphene from graphite for direct fabrication of supercapacitor

A facile production of graphene via electro-exfoliation is demonstrated using different types of oxidizing agent (HNO3, NaNO3, H2SO4 and H2O2) in the presence of sodium dodecylbenzenesulfonate as a surfactant. Different types of surfactant–oxidizing agent solutions in different concentrations significantly influenced the electrochemical exfoliation of graphite rod. The surface morphology, layer thickness and defects of the as-produced graphene are further evaluated. Additionally, the as-produced graphene is fabricated as a supercapacitor electrode via direct vacuum filtration. Nylon membrane and polymer gel, each containing 2.0 M of potassium hydroxide, are utilized to investigate the influence of the electrolyte type on the capacitance performance. Upon 1000 charge/discharge cycles, the nylon membrane electrolyte recorded capacitance retention of 94%, whereas the polymer gel electrolyte recorded an impressive capacitance retention that exceeded 100%. The potential of the fabricated supercapacitor for real applications is manifested by its ability to light up a light-emitting diode upon charging

Enhancing Machining performance in Stainless Steel Machining using MXene Coolant: A Detailed Examination

Metal cutting, a complex process in manufacturing, involves various factors that significantly affect the quality of the final product. Notably, the turning process is crucial, with outcomes that heavily depend on multiple machining parameters. These parameters encompass speed, depth of cut, feed rate, the type of coolant used (specifically, high heat transfer MXene coolant), and insert types, among others. The material of the workpiece is also a critical factor in the metal-cutting operation. This study focuses on achieving optimal surface quality and minimizing cutting forces in the turning process. It recognizes the substantial impact of numerous process parameters, directly or indirectly affecting the product's surface roughness and cutting forces. Understanding these optimal parameters can lower machining costs and improve product quality. Our research concentrates on turning a stainless-steel alloy workpiece using a carbide insert tool. We employ the Response Surface Method (RSM) to optimize cutting parameters within a set range of cutting speed (100, 125, 150 m/min), feed rate (0.1, 0.2, 0.3 mm/rev), and depth of cut (0.4, 0.8, 1.2 mm). Additionally, we use various tool geometries and the RSM design of experiments to enhance and analyze the multi-response parameters of surface roughness and tool life. Optimal machining parameters for MXene-NFC involve a cutting speed of 140 m/min, a feed rate of 0.05 mm/rev, and a depth of cut of 0.5 mm. These settings ensure minimal surface roughness, maximum tool life, and the greatest total length of cut, achieving a composite desirability of 0.695

Chinese and Korean Characters Engage the Same Visual Word Form Area in Proficient Early Chinese-Korean Bilinguals

A number of recent studies consistently show an area, known as the visual word form area (VWFA), in the left fusiform gyrus that is selectively responsive for visual words in alphabetic scripts as well as in logographic scripts, such as Chinese characters. However, given the large difference between Chinese characters and alphabetic scripts in terms of their orthographic rules, it is not clear at a fine spatial scale, whether Chinese characters engage the same VWFA in the occipito-temporal cortex as alphabetic scripts. We specifically compared Chinese with Korean script, with Korean script serving as a good example of alphabetic writing system, but matched to Chinese in the overall square shape. Sixteen proficient early Chinese-Korean bilinguals took part in the fMRI experiment. Four types of stimuli (Chinese characters, Korean characters, line drawings and unfamiliar Chinese faces) were presented in a block-design paradigm. By contrasting characters (Chinese or Korean) to faces, presumed VWFAs could be identified for both Chinese and Korean characters in the left occipito-temporal sulcus in each subject. The location of peak response point in these two VWFAs were essentially the same. Further analysis revealed a substantial overlap between the VWFA identified for Chinese and that for Korean. At the group level, there was no significant difference in amplitude of response to Chinese and Korean characters. Spatial patterns of response to Chinese and Korean are similar. In addition to confirming that there is an area in the left occipito-temporal cortex that selectively responds to scripts in both Korean and Chinese in early Chinese-Korean bilinguals, our results show that these two scripts engage essentially the same VWFA, even at the level of fine spatial patterns of activation across voxels. These results suggest that similar populations of neurons are engaged in processing the different scripts within the same VWFA in early bilinguals