Morphological evolution of lamellar forming polystyrene-block-poly(4-vinylpyridine) copolymer under solvent annealing

In this work, we are reporting a very simple and efficient method to form lamellar structures of symmetric polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) copolymer thin films with vertically (to the surface plane) orientated lamellae using a solvent annealing approach. The methodology does not require any brush chemistry to engineer a neutral surface and it is the block neutral nature of the film-solvent vapour interface that defines the orientation of the lamellae. The microphase separated structure of two different molecular weight lamellar forming PS-block-P4VP copolymers formed under solvent vapour annealing was monitored using atomic force microscopy (AFM) so as to understand the morphological changes of the films upon different solvent exposure. In particular, the morphology changes from micellar structures to well-defined microphase separated arrangements. The choice of solvent/s (single and dual solvent exposure) and the solvent annealing conditions (temperature, time etc.) has important effects on structural transitions of the films and it was found that a block neutral solvent was required to realize vertically aligned P4VP lamellae. The results of the structural variation of the phase separated nanostructured films through the exposure to ethanol are also described

Anti-RSV Peptide-Loaded Liposomes for the Inhibition of Respiratory Syncytial Virus

Although respiratory syncytial virus (RSV) is one of the leading causes of acute respiratory tract infection in infants and adults, effective treatment options remain limited. To circumvent this issue, there is a novel approach, namely, the development of multifunctional liposomes for the delivery of anti RSV-peptides. While most of the peptides that are used for loading with the particulate delivery systems are the penetrating peptides, an alternative approach is the development of liposome-peptide systems, which are loaded with an RSV fusion peptide (RF-482), which has been designed to inhibit the RSV fusion and block infection. The results of this work have revealed that the liposomes themselves can serve as potential RSV inhibitors, whilst the anti-RSV-peptide with liposomes can significantly increase the RSV inhibition when compared with the anti-RSV peptide alone

Formation of sub-7 nm feature size PS-b-P4VP block copolymer structures by solvent vapour process

The nanometer range structure produced by thin films of diblock copolymers makes them a great of interest as templates for the microelectronics industry. We investigated the effect of annealing solvents and/or mixture of the solvents in case of symmetric Poly (styrene-block-4vinylpyridine) (PS-b-P4VP) diblock copolymer to get the desired line patterns. In this paper, we used different molecular weights PS-b-P4VP to demonstrate the scalability of such high χ BCP system which requires precise fine-tuning of interfacial energies achieved by surface treatment and that improves the wetting property, ordering, and minimizes defect densities. Bare Silicon Substrates were also modified with polystyrene brush and ethylene glycol self-assembled monolayer in a simple quick reproducible way. Also, a novel and simple in situ hard mask technique was used to generate sub-7nm Iron oxide nanowires with a high aspect ratio on Silicon substrate, which can be used to develop silicon nanowires post pattern transfer

The morphology of ordered block copolymer patterns as probed by high resolution imaging

The microphase separation of block copolymer (BCP) thin films can afford a simple and cost-effective means to studying nanopattern surfaces, and especially the fabrication of nanocircuitry. However, because of complex interface effects and other complications, their 3D morphology, which is often critical for application, can be more complex than first thought. Here, we describe how emerging microscopic methods may be used to study complex BCP patterns and reveal their rich detail. These methods include helium ion microscopy (HIM) and high resolution x-section transmission electron microscopy (XTEM), and complement conventional secondary electron and atomic force microscopies (SEM and TEM). These techniques reveal that these structures are quite different to what might be expected. We illustrate the advances in the understanding of BCP thin film morphology in several systems, which result from this characterization. The systems described include symmetric, lamellar forming polystyrene-b-polymethylmethacrylate (PS-b-PMMA), cylinder forming polystyrene-b-polydimethylsiloxane (PS-b-PDMS), as well as lamellar and cylinder forming patterns of polystyrene-b-polyethylene oxide (PS-b-PEO) and polystyrene-b-poly-4-vinylpyridine (PS-b-P4VP). Each of these systems exhibits more complex arrangements than might be first thought. Finding and developing techniques whereby complex morphologies, particularly at very small dimensions, can be determined is critical to the practical use of these materials in many applications. The importance of quantifying these complex morphologies has implications for their use in integrated circuit manufacture, where they are being explored as alternative pattern forming methods to conventional UV lithography

An Insight on Analytical Profile on Bisoprolol Fumarate – A Selective Beta-1 Adrenoreceptor Blocker

BF is Beta-adreno receptor antagonist and used as an AntiHypertensive Drug. BF gives the blocking action on β1-adrenergic receptors in the heart and vascular smooth muscle. The present review compiles the various approaches implemented for quantification of BF in bulk drug, pharmaceutical matrix and biological fluid. This review represents more than 50 analytical methods which include capillary electrophoresis, HPLC, HPTLC, UV-Spectroscopy, UPLC, impurity profiling and electrochemical methods implemented for estimation of BF as a single component as well as in multicomponent

Fabrication of MoS2 nanowire arrays and layered structures via the self-assembly of block copolymers

The electronics industry is beginning to show interest in 2D molybdenum disulfide (2D‐MoS2) as a potential device material due to its low band gap and high mobility. However, current methods for its synthesis are not “fab” friendly and require harsh environments and processes. Here, a novel method to prepare MoS2 nanowire arrays and layered structures via self‐assembly of a block copolymer system is reported. Well‐controlled films of microphase separated line‐space nanopatterns have been achieved by solvent annealing process. The self‐assembled films are used as “templates” for the generation of nonstoichometric molybdenum oxide by in situ inclusion technique following UV/Ozone treatment. Well‐ordered array of MoS2 and a layered structure are then prepared by chemical vapor deposition using sulfur powder at lower temperature. The surface morphology, crystal structure, and phases are examined by different microscopic and spectroscopic techniques. This strategy can be extended to several other 2D materials systems and open the pathway toward better optoelectronic and nanoelectromechanical systems

Physiology, pathogenicity and immunogenicity of lon and/or cpxR deleted mutants of Salmonella Gallinarum as vaccine candidates for fowl typhoid

To construct a novel live vaccine candidate for fowl typhoid (FT) caused by Salmonella Gallinarum (SG), the lon and cpxR genes that are related to host-pathogen interaction were deleted from a wild type SG using the allelic exchange method. The mutants were grown normally, as was the wild type. The biochemical properties of the mutants remained very similar to those of the wild-type, while JOL914 (Δlon) and JOL916 (ΔlonΔcpxR) were mucoid. Extracellular polysaccharide increased 30.6-, 1.3-, and 46.2-fold in JOL914, JOL915 (ΔcpxR), and JOL916, respectively. Dot-blot analysis demonstrated significant increases of FimA expression at 6.77-, 2.33-, and 3.90-fold for JOL914, JOL915, and JOL916, respectively. Internalizations of JOL914, JOL915, and JOL916, in chicken abdominal macrophages, were increased at 4.65-, 0.50-, and 2.72-fold, respectively. Virulences of JOL914, JOL915 and JOL916, analyzed by LD50 using 1-week-old chickens, were attenuated approximately at 101-, 101-, and > 103-fold, respectively. The oral inoculations of 2 × 107 cfu of the wild type, JOL914, JOL915 and JOL916 caused 55.6, 16.7, 22.2, and 0.0% mortality, respectively. Significantly moderate gross lesions of the liver and spleen were observed in the JOL916 group compared to the other groups. An induced immune response and significant peripheral mononuclear proliferation reaction were observed in the JOL916 group. At the protection against the wild type challenge, JOL916 offered 100% protection. Thus, the results of this study suggest that JOL916 among the mutants studied represented the safest and most effective live vaccine candidate against FT

Design of experiment avenue for development and validation of RP-HPLC-PDA method for determination of apremilast in bulk and in in-house tablet formulation

Abstract Background Apremilast is phosphodiesterase-4 and an immunomodulating agent used for treatment of refractory psoriatic arthritis. Methods The reversed-phase high-performance liquid-chromatography method for analysis of apremilast was developed and validated as per ICH guidelines. The separation of apremilast was performed on PrincetonSPHERE Ultima C18 column (250 mm × 4.6 mm, i.d., 5 μm particle size) with photodiode array detection carried out at 231 nm. A Box–Behnken design with response surface methodology was executed out for optimization of chromatographic conditions of reversed-phase high-performance liquid-chromatography for finished desired chromatographic separation of apremilast from its formulation with less number of experimental trials. Three independent factors, namely methanol composition in the mobile phase, pH of an aqueous phase, and flow rate, were used to construct a mathematical model and study the effects of these independent factors on responses such as retention time, theoretical plates, and tailing factor. Results Optimized experimental conditions for proposed work consists of methanol and water, pH 3.50 adjusted with ortho-phosphoric acid (70:30 % v/v) as a mobile phase at a flow rate 1 ml/min with a retention time was found to be 5.15 min. Accuracy study was completed at three different levels and was found in the range of 99.44–101.49%. Conclusion The 3D response surface graphs revealed that the methanol composition and pH of an aqueous phase were both most stringent factors affecting the responses. Thus, a new, precise, and accurate HPLC method was developed and validated and can be used for regular analysis of apremilast

Construction of a <it>Salmonella</it> Gallinarum ghost as a novel inactivated vaccine candidate and its protective efficacy against fowl typhoid in chickens

Abstract In order to develop a novel, safe and immunogenic fowl typhoid (FT) vaccine candidate, a Salmonella Gallinarum ghost with controlled expression of the bacteriophage PhiX174 lysis gene E was constructed using pMMP99 plasmid in this study. The formation of the Salmonella Gallinarum ghost with tunnel formation and loss of cytoplasmic contents was observed by scanning electron microscopy and transmission electron microscopy. No viable cells were detectable 24 h after the induction of gene E expression by an increase in temperature from 37 °C to 42 °C. The safety and protective efficacy of the Salmonella Gallinarum ghost vaccine was tested in chickens that were divided into four groups: group A (non-immunized control), group B (orally immunized), group C (subcutaneously immunized) and group D (intramuscularly immunized). The birds were immunized at day 7 of age. None of the immunized animals showed any adverse reactions such as abnormal behavior, mortality, or signs of FT such as anorexia, depression, or diarrhea. These birds were subsequently challenged with a virulent Salmonella Gallinarum strain at 3 weeks post-immunization (wpi). Significant protection against the virulent challenge was observed in all immunized groups based on mortality and post-mortem lesions compared to the non-immunized control group. In addition, immunization with the Salmonella Gallinarum ghosts induced significantly high systemic IgG response in all immunized groups. Among the groups, orally-vaccinated group B showed significantly higher levels of secreted IgA. A potent antigen-specific lymphocyte activation response along with significantly increased percentages of CD4+ and CD8+ T lymphocytes found in all immunized groups clearly indicate the induction of cellular immune responses. Overall, these findings suggest that the newly constructed Salmonella Gallinarum ghost appears to be a safe, highly immunogenic, and efficient non-living bacterial vaccine candidate that protects against FT.</p