Intracellular mechanism of the action of inhibin on the secretion of follicular stimulating hormone and of luteinizing hormone induced by LH-RH in vitro

The FSH secretion-inhibiting action of inhibin in vitro under basal conditions and also in the presence of LH-RH is suppressed by the addition of MIX, a phosphodiesterase inhibitor. In the presence of LH-RH, inhibin reduces significantly the intracellular level of cAMP in isolated pituitary cells. In contrast, the simultaneous addition of MIX and inhibin raises the cAMP level, and this stimulation is comparable to the increase observed when MIX is added alone. These observations suggest that one mode of action of inhibin could be mediated by a reduction in cAMP within the pituitary gonadotropic cell

Inversion of the Diffraction Pattern from an Inhomogeneously Strained Crystal using an Iterative Algorithm

The displacement field in highly non uniformly strained crystals is obtained by addition of constraints to an iterative phase retrieval algorithm. These constraints include direct space density uniformity and also constraints to the sign and derivatives of the different components of the displacement field. This algorithm is applied to an experimental reciprocal space map measured using high resolution X-ray diffraction from an array of silicon lines and the obtained component of the displacement field is in very good agreement with the one calculated using a finite element model.Comment: 5 pages, 4 figure

Holocene earthquake-triggered mass-wasting events recorded in the sediments of Lake Puyehue (South-Central Chile)

Despite South-Central Chile’s high seismicity and the occurrence of earth’s largest instrumentally recorded earthquake (AD 1960; Mw: 9.5), paleoseismic data is still scarce for this region. In this study, very high-resolution reflection seismic profiles (3.5 kHz) in Lake Puyehue (41°S) were utilized to trace giant seismic events back into time. The seismic profiles show repeated occurrences of multiple mass-wasting deposits (slumps, debris flows, homogenites) occurring at a same seismic-stratigraphic horizon, indicating that they are coeval and caused by a single mass-wasting event of basin-wide importance. An age-depth model, based on 9 AMS radiocarbon datings and varve-counting on an 11 m-long sediment core, has been used to develop a “seismic chronostratigraphy”. It allows dating of the mass-wasting events by interpolation between dated seismic horizons to the distal parts of the mass-wasting deposits. The mass-wasting events are assumed to be earthquake-triggered because:The recentmost mass-wasting events correlate with the devastating historical earthquakes of AD 1575 and AD 1960.Synchronicity of multiple slope failures (mass-wasting events) requires a strong regional trigger, such as an earthquake. Consequently, local slope oversteepening at delta fronts or local fluid expulsion could not initiate such widespread events.South-Central Chile has been historically subjected to several strong (M > 8) subduction earthquakes and subduction processes have been constantly active since Mesozoic times.Multiple slope failures occur at water depths > 70 m, which rules out shallow instability triggers, such as storm wave action and lake-level fluctuations.This study reveals nine paleoseismic events during the Holocene with a mean recurrence rate of about 1000 yr, but with an overall relatively aperiodic occurrence (ranging between 400-2000 yrs.). The most prominent event took place around 1660 cal. yr. BP, evidenced by at least 29 simultaneous mass-movements and a homogenite deposit. Quantitative comparison of mass-wasting events related to the historical earthquakes of AD 1960 and AD 1575 showed significant differences (respectively 17 and 4 observed mass-wasting deposits) although these earthquakes are assumed to have had a comparable strength. This can be attributed to a lowered sedimentation rate on the potentially unstable slopes in the period 3000 cal. yr. BP – 500 cal. yr. BP, which would have made lacustrine earthquake recording less likely in AD 1575. The absence of mass-wasting deposits associated with other historical earthquakes (e.g.: AD 1737 (Ms: 7.5) and AD 1837 (Ms: 8)) indicates that only mega-earthquakes (Mw >8.5) within a range of about 300 km are recorded in the sedimentary sequence of Lake Puyehue.Reflection seismic profiles also show vertical fluidisation structures with large-scale sediment injections, which disturb the upper sedimentary sequences. The top of these fluidisation structures and diverse deformation levels could be spatially linked to seismically induced mass-wasting deposits and consequently indicate an additional method for lacustrine paleo-earthquake tracing.Several reconaissance seismic surveys on other glacigenic lakes in the Chilean Lake District also show promising paleoseismic records, which will offer the opportunity to correlate lacustrine records to reveal South-Central Chile’s paleoseismic history in detail and the earthquake registration capacities of its glacigenic lakes

Carbonation of alkaline paper mill waste to reduce CO2 greenhouse gas emissions into the atmosphere

International audienceThe global warming of Earth's near-surface, air and oceans in recent decades is a direct consequence of anthropogenic emission of greenhouse gases into the atmosphere such as CO2, CH4, N2O and CFCs. The CO2 emissions contribute approximately 60% to this climate change. This study investigates experimentally the aqueous carbonation mechanisms of an alkaline paper mill waste containing about 55 wt% portlandite (Ca(OH)2) as a possible mineralogical CO2 sequestration process. The overall carbonation reaction includes the following steps: (1) Ca release from portlandite dissolution, (2) CO2 dissolution in water and (3) CaCO3 precipitation. This CO2 sequestration mechanism was supported by geochemical modelling of final solutions using PHREEQC software, and observations by scanning electron microscope and X-ray diffraction of final reaction products. According to the experimental protocol, the system proposed would favour the total capture of approx. 218 kg of CO2 into stable calcite/ton of paper waste, independently of initial CO2 pressure. The final product from the carbonation process is a calcite (ca. 100 wt%)-water dispersion. Indeed, the total captured CO2 mineralized as calcite could be stored in degraded soils or even used for diverse industrial applications. This result demonstrates the possibility of using the alkaline liquid–solid waste for CO2 mitigation and reduction of greenhouse effect gases into the atmosphere

Mineral sequestration of CO2 by aqueous carbonation of coal combustion fly-ash

International audienceThe increasing CO2 concentration in the Earth's atmosphere, mainly caused by fossil fuel combustion, has led to concerns about global warming. A technology that could possibly contribute to reducing carbon dioxide emissions is the in-situ mineral sequestration (long term geological storage) or the ex-situ mineral sequestration (controlled industrial reactors) of CO2. In the present study, we propose to use coal combustion fly-ash, an industrial waste that contains about 4.1 wt.% of lime (CaO), to sequester carbon dioxide by aqueous carbonation. The carbonation reaction was carried out in two successive chemical reactions, first, the irreversible hydration of lime. CaO + H2O → Ca(OH)2 second, the spontaneous carbonation of calcium hydroxide suspension. Ca(OH)2 + CO2 → CaCO3 + H2O A significant CaO–CaCO3 chemical transformation (approximately 82% of carbonation efficiency) was estimated by pressure-mass balance after 2 h of reaction at 30 °C. In addition, the qualitative comparison of X-ray diffraction spectra for reactants and products revealed a complete CaO–CaCO3 conversion. The carbonation efficiency of CaO was independent on the initial pressure of CO2 (10, 20, 30 and 40 bar) and it was not significantly affected by reaction temperature (room temperature “20–25”, 30 and 60 °C) and by fly-ash dose (50, 100, 150 g). The kinetic data demonstrated that the initial rate of CO2 transfer was enhanced by carbonation process for our experiments. The precipitate calcium carbonate was characterized by isolated micrometric particles and micrometric agglomerates of calcite (SEM observations). Finally, the geochemical modelling using PHREEQC software indicated that the final solutions (i.e. after reaction) are supersaturated with respect to calcium carbonate (0.7 ≤ saturation index ≤ 1.1). This experimental study demonstrates that 1 ton of fly-ash could sequester up to 26 kg of CO2, i.e. 38.18 ton of fly-ash per ton of CO2 sequestered. This confirms the possibility to use this alkaline residue for CO2 mitigation

Arsenate Incorporation in Gypsum Probed by Neutron, X-ray Scattering and Density Functional Theory Modeling

International audienceThe ability of gypsum, a common sulfate mineral, to host arsenic atoms in its crystalline structure, is demonstrated through experimental structural studies of the solid solutions formed upon synthetic coprecipitation of gypsum (CaSO4 ·2H2O) and arsenic. Neutron and X-ray diffraction methods show an enlargement of the gypsum unit cell proportional to the concentration of arsenic in the solids and to the pH solution value. The substitution of sulfate ions (SO42-) by arsenate ions is shown to be more likely under alkaline conditions, where the HAsO42- species predominates. A theoretical Density Functional Theory model of the arsenicdoped gypsum structure reproduces the experimental volume expansion. Extended X-ray Absorption Fine Structure (EXAFS) measurements of the local structure around the arsenic atom in the coprecipitated solids confirm solid state substitution and allow some refinement of the local structure, corroborating the theoretical structure found in the simulations. The charge redistribution within the structure upon substitutions of either the protonated or the unprotonated arsenate species studied by means of Mulliken Population Analyses demonstrates an increase in the covalency in the interaction between Ca2+ and AsO4 3-, whereas the interaction between Ca2+ and HAsO4 2- remains predominantly ionic

Paleoproductivity of Puyehue Lake (Southern Chile) during the last millenium: climatic significance

Southern Chile is a key site for the understanding of past climatic variations since it is influenced by the El Nino Southern Oscillation (ENSO). We investigated high resolution climate changes during the last millennium by a multi-proxy analyse of short cores (60 cm long) collected in Puyehue lake (40°S): magnetic susceptibility, grain-size, mineralogy, density, gamma-density, LOI, biogenic silica content and bulk XRF geochemistry. According to age-depth model (210Pb, 137Cs and varve counting - Boës et al., this session), the cores cover the last 600 yr. The sediment is characterized by volcanic minerals and a high diatom content, due to the important lacustrine silica supply characteristic of volcanic environments. Moreover, the active volcanism of the Chilean Lake District is responsible of a high number of tephra deposits. Our main aim is to quantify biogenic particles fluxes throughout the last millennium by Na2CO3 dissolution and by normative calculation based on bulk XRF analyses. The result shows that volcanic eruptions do not influence the biogenic productivity of the lake. From 1400 to 1880 yr. AD, paleoproductivity shows a global trend from low to high biogenic production. Important paleoproductivity changes are observed over the last 120 yr. Results are compared with historical data and discussed in terms of climate changes and/or anthropic influence

Generic and Layered Framework Components for the Control of a Large Scale Data Acquisition System

The complexity of today's experiments in High Energy Physics results in a large amount of readout channels which can count up to a million and above. The experiments in general consist of various subsystems which themselves comprise a large amount of detectors requiring sophisticated DAQ and readout electronics. We report here on the structured software layers to control such a data acquisition system for the case of LHCb which is one of the four experiments for LHC. Additional focus is given on the protocols in use as well as the required hardware. An abstraction layer was implemented to allow access on the different and distinct hardware types in a coherent and generic manner. The hierarchical structure which allows propagating commands down to the subsystems is explained. Via finite state machines an expert system with auto-recovery abilities can be modeled

Bose-Einstein source of intermittency in hadronic interactions

The multi-particle Bose-Einstein correlations are the source of ''intermittency'' in high energy hadronic collisions. The power-law like increase of factorial moments with decreasing bin size was obtained by complete event weighing technique with gaussian approximation of space-time particle emitting source shape. The value of source size parameter was found to be higher than the common one fitted with the help of the standard Handbury Brown-Twiss procedure.Comment: 12