Selective oxidation of raw glycerol using supported AuPd nanoparticles

Bimetallic AuPd supported on different carbonaceous materials and TiO2 was tested in the liquid phase oxidation of commercial grade and raw glycerol. The latter was directly obtained from the base-catalyzed transesterification of edible rapeseed oil using KOH. The best catalytic results were obtained using activated carbon and nitrogen-functionalized carbon nanofibers as supports. In fact, the catalysts were more active using pure glycerol instead of the one obtained from rapeseed, where strong deactivation phenomena were present. Fourier transform infrared (FT-IR) and TEM were utilized to investigate the possible reasons for the observed loss of activity

Enhanced activity of Au/NiO nanohybrids for the reductive amination of benzyl alcohol

Gold nanoparticles were prepared by sol immobilization (AuSI) or deposition precipitation (AuDP), then deposited on NiO and commercial TiO2(P25). The Au/NiO catalysts showed higher activity and yield to the secondary amine, compared to Au/TiO2catalysts, when tested for the reductive amination of benzyl alcohol with isopropylamine. We attribute this result to a synergistic effect between Au and NiO. Moreover, as a result of the protective effect of the polyvinyl alcohol used in the sol immobilization synthesis, the gold nanoparticles on NiO demonstrate an increased resistance to structural changes during the reaction. This effect results in enhanced catalytic efficiency in terms of activity, and better stability against deactivation

Tailoring gold nanoparticle characteristics and the impact on aqueous-phase oxidation of glycerol

Poly(vinyl alcohol) (PVA)-stabilized Au nanoparticles (NPs) were synthesized by colloidal methods in which temperature variations (−75 to 75 °C) and mixed H2O/EtOH solvent ratios (0, 50, and 100 vol/vol) were used. The resulting Au NPs were immobilized on TiO2 (P25), and their catalytic performance was investigated for the liquid phase oxidation of glycerol. For each unique solvent system, there was a systematic increase in the average Au particle diameter as the temperature of the colloidal preparation increased. Generation of the Au NPs in H2O at 1 °C resulted in a high observed activity compared with current Au/TiO2 catalysts (turnover frequency = 915 h−1). Interestingly, Au catalysts with similar average particle sizes but prepared under different conditions had contrasting catalytic performance. For the most active catalyst, aberration-corrected high angle annular dark field scanning transmission electron microscopy analysis identified the presence of isolated Au clusters (from 1 to 5 atoms) for the first time using a modified colloidal method, which was supported by experimental and computational CO adsorption studies. It is proposed that the variations in the populations of these species, in combination with other solvent/PVA effects, is responsible for the contrasting catalytic properties

DFT-assisted spectroscopic studies on the coordination of small ligands to palladium: from isolated ions to nanoparticles

A combination of experimental spectroscopies (UV–vis and Fourier-transform infrared) and computational modeling was used to investigate the coordination of small ligands (aminopropanol and propanediol) to Pd species during the metal nanoparticle formation process. Differences emerged between O- (propanediol) and N-containing (aminopropanol) ligands. In particular, a strong interaction between the NH amino group and Pd2+ ions could be inferred on the basis of spectroscopic evidences, which was corroborated by theoretical simulations, which confirmed the preferential coordination of aminopropanol through the NH group. This interaction seems to potentially cause the aminopropanol ligand to control the particle shape through a selective blocking of Pd(100) facets, which promote the growth on the Pd(111) facets

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Triazine-based polymers as nanostructured supports for the liquid-phase oxidation of alcohols

A covalent triazine framework (CTF) was used as support for palladium nanoparticles (NPs) and Pd/CTF was applied as the catalyst in the selective oxidation of benzyl alcohol. N\u2005groups in the CTF appeared more efficient than those created on carbon nanotubes (CNTs) by NH3/high-temperature treatment in stabilizing Pd NPs against growth during the immobilization step. This assured a high metal dispersion, which led to a highly active and stable catalyst in the alcohol oxidation reaction. Indeed, Pd on the CTF was more stable in recycling than Pd on activated carbon (AC) and on nitrogen-doped CNTs, particularly avoiding leaching of Pd NPs. Moreover, Pd on the CTF was less sensitive than Pd on AC to the decrease of reactant concentration. This in turn led to a higher selectivity to benzaldehyde (98\u2009%) with a considerable activity (turnover frequency 1453\u2005h 121)

Au on nanosized NiO: a cooperative effect between Au and nano NiO in the base-free alcohol oxidation

Nanosized NiO has been synthesized and used as a support for polyvinyl alcohol-protected Au nanoparticles. This catalytic system exhibits an extraordinary performance in the base-free liquid phase oxidation of alcohols compared to the same Au supported on a commercial, micrometersized NiO. This enhancement in activity cannot be solely attributed to the improved basic properties of the support. A cooperative effect between Au nanoparticles and nanosized NiO is envisaged

Glycerol oxidation using gold-containing catalysts

Glycerol is an important byproduct of biodiesel production, and it is produced in significant amounts by transesterification of triglycerides with methanol. Due to the highly functionalized nature of glycerol, it is an important biochemical that can be utilized as a platform chemical for the production of high-added-value products. At present, research groups in academia and industry are exploring potential direct processes for the synthesis of useful potential chemicals using catalytic processes. Over the last 10 years, there has been huge development of potential catalytic processes using glycerol as the platform chemical. One of the most common processes investigated so far is the catalytic oxidation of glycerol at mild conditions for the formation of valuable oxygenated compounds used in the chemical and pharmaceutical industry. The major challenges associated with the selective oxidation of glycerol are (i) the control of selectivity to the desired products, (ii) high activity and resistance to poisoning, and (iii) minimizing the usage of alkaline conditions. To address these challenges, the most common catalysts used for the oxidation of glycerol are based on supported metal nanoparticles. The first significant breakthrough was the successful utilization of supported gold nanoparticles for improving the selectivity to specific products, and the second was the utilization of supported bimetallic nanoparticles based on gold, palladium, and platinum for improving activity and controlling the selectivity to the desired products. Moreover, the utilization of base-free reaction conditions for the catalytic oxidation of glycerol has unlocked new pathways for the production of free-base products, which facilitates potential industrial application. The advantages of using gold-based catalysts are the improvement of the catalyst lifetime, stability, and reusability, which are key factors for potential commercialization. In this Account, we discuss the advantages of the using supported gold-based nanoparticles, preparation methods for achieving highly active gold-based catalysts, and parameters such as particle size, morphology of the bimetallic particle, and metal 12support interactions, which can influence activity and selectivity to the desire

Data for 'Tandem Site and Size Controlled Pd Nanoparticles for the Directed Hydrogenation of Furfural'

Data in support of the article Scott M. Rogers, C. Richard A. Catlow, Carine E. Chan-Thaw, Arunabhiram Chutia, Nan Jian, Richard E. Palmer, Michal Perdjon, Adam Thetford, Nikolaos Dimitratos, Alberto Villa, and Peter P. Wells (2017) Tandem Site and Size Controlled Pd Nanoparticles for the Directed Hydrogenation of Furfural ACS Catalysis doi:10.1021/acscatal.6b03190 Funding by EPSRC: The UK Catalysis Hub (EP/K014706/1, EP/K014668/1, EP/K014854/1, EP/K014714/1), 2013 to 2016. Materials Chemistry High End Computing Consortium (EP/L000202), 2013 to 2018.</span