Effects of slow and regular breathing exercise on cardiopulmonary coupling and blood pressure

Investigation of the interaction between cardiovascular variables and respiration provides a quantitative and noninvasive approach to assess the autonomic control of cardiovascular function. The aim of this paper is to investigate the changes of cardiopulmonary coupling (CPC), blood pressure (BP) and pulse transit time (PTT) during a stepwise-paced breathing (SPB) procedure (spontaneous breathing followed by paced breathing at 14, 12.5, 11, 9.5, 8 and 7 breaths per minute, 3 min each) and gain insights into the characteristics of slow breathing exercises. RR interval, respiration, BP and PTT are collected during the SPB procedure (48 healthy subjects, 27 ± 6 years). CPC is assessed through investigating both the phase and amplitude dynamics between the respiration-induced components from RR interval and respiration by the approach of ensemble empirical mode decomposition. It was found that even though the phase synchronization and amplitude oscillation of CPC were both enhanced by the SPB procedure, phase coupling does not increase monotonically along with the amplitude oscillation during the whole procedure. Meanwhile, BP was reduced significantly by the SPB procedure (SBP: from 122.0 ± 13.4 to 114.2 ± 14.9 mmHg, p < 0.001, DBP: from 82.2 ± 8.6 to 77.0 ± 9.8 mmHg, p < 0.001, PTT: from 172.8 ± 20.1 to 176.8 ± 19.2 ms, p < 0.001). Our results demonstrate that the SPB procedure can reduce BP and lengthen PTT significantly. Compared with amplitude dynamics, phase dynamics is a different marker for CPC analysis in reflecting cardiorespiratory coherence during slow breathing exercise. Our study provides a methodology to practice slow breathing exercise, including the setting of target breathing rate, change of CPC and the importance of regular breathing. The applications and usability of the study results have also been discussed.National Natural Science Foundation (China) (Grant Number: 61471398)Beijing Natural Science Foundation (Grant Number: 3122034)General Logistics Science Foundation (Grant Number: CWS11C108)National Key Technology Research and Development Program (Grant Numbers: 2013BAI03B04, 2013BAI03B05

A Radial Zoom Motion-Based Paradigm for Steady State Motion Visual Evoked Potentials

Background: In steady state visual evoked potential (SSVEP)-based brain-computer interfaces, prolonged repeated flicker stimulation would reduce the system performance. To reduce the visual discomfort and fatigue, while ensuring recognition accuracy, and information transmission rate (ITR), a novel motion paradigm based on the steady-state motion visual evoked potentials (SSMVEPs) is proposed.Methods: The novel SSMVEP paradigm of the radial zoom motion was realized using the sinusoidal form to modulate the size of the stimuli. The radial zoom motion-based SSMVEP paradigm was compared with the flicker-based SSVEP paradigm and the SSMVEP paradigm based on Newton's ring motion. The canonical correlation analysis was used to identify the frequency of the eight targets, the recognition accuracy of different paradigms with different stimulation frequencies, and the ITR under different stimulation durations were calculated. The subjective comfort scores and fatigue scores, and decrease in the accuracy due to fatigue was evaluated.Results: The average recognition accuracy of the novel radial zoom motion-based SSMVEP paradigm was 93.4%, and its ITR reached 42.5 bit/min, which was greater than the average recognition accuracy of the SSMVEP paradigm based on Newton's ring motion. The comfort score of the novel paradigm was greater than both the flicker-based SSVEP paradigm and SSMVEP paradigm based on Newton's ring motion. The decrease in the recognition accuracy due to fatigue was less than that of the SSSMVEP paradigm based on Newton's ring motion.Conclusion: The SSMVEP paradigm based on radial zoom motion has high recognition accuracy and ITR with low visual discomfort and fatigue scores. The method has potential advantages in overcoming the performance decline caused by fatigue

Numerical Simulation of Tunnel Ventilation Considering the Air Leakage Mechanism of a Ventilation Duct

Ventilation problems are critical in tunnel engineering, and the loss of air volume in ventilation ducts is generally estimated using empirical methods. The air volume calculation makes it difficult to meet the accuracy requirements, resulting in resource waste or insufficient air supply. In this study, the forced ventilation system of the tunnel under construction was investigated based on the computational fluid dynamics method. The mechanism of air leakage on airflow distribution and pollutant transport in the tunnel is determined. Air leakage reduces the distribution peak of pollutants and effectively accelerates the emission of harmful gases. However, this effect decreases with distance from the air duct inlet. Through the calculation results of nearly one hundred models, it is found that the air leakage of the duct can be fitted by logarithmic function and verified by empirical equation. The matching degree between the fitting function of the model and the empirical equation depends on the length of the tunnel. On this basis, the calculation formula of effective air volume near the working face is derived. This study can be applied to the ventilation engineering of the tunnel under construction and provide a theoretical basis for the calculation of the effective air supply

Chemical weathering processes in the Chinese Loess Plateau

Covered by erodible loess and affected by significant seasonal climate variations, chemical weathering in the Chinese Loess Plateau (abbreviated as CLP) has important effects on the hydrochemistry of the Yellow River and the global carbon cycle. However, chemical weathering processes in the CLP are still unclear. Based on 296 river water samples in the CLP in the different seasons, hydrochemistry, weathering processes, and their controlling factors were revealed. River waters in the CLP exhibited slightly alkalinity (pH = 8.4 ± 0.5) with much high total dissolved solids (TDS) values (691 ± 813 mg/L). The water types of river water in the CLP were primarily SO42− − Cl− − Na+, HCO3− − Ca2+ − Mg2+, and SO42− − Cl− − Ca2+ − Mg2+. According to the forward model, evaporite dissolution has the largest contribution (55.1% ± 0.2%) to riverine solutes in the CLP, then followed by carbonate weathering (35.6% ± 0.2%) and silicate weathering (6.5% ± 0.1%). For spatio-temporal variations, the contribution of evaporite dissolution in the CLP decreased from northwest to southeast with higher proportion in the dry season, carbonate weathering increased from northwest to southeast with a higher proportion in the wet season, and silicate weathering showed minor spatio-temporal variations. Ca2+ and Mg2+ were affected by carbonate precipitation and/or incongruent calcite dissolution, and about 50% of samples exhibited cation exchange reactions. The physical erosion rate in the CLP, which was 372 ± 293 t·km−2·yr−1, varied greatly and was greater than those of other worldwide rivers. Chemical weathering rates in the CLP showed an increasing trend southward. During the wet season, high runoff led to the release of evaporite and carbonate from loess, while the interfacial reaction kinetic limited the increase of the silicate weathering rates. The CO2 consumption budget by carbonate weathering (6.1 × 1010 mol/yr) and silicate weathering (1.6 × 1010 mol/yr) in the CLP accounted for 0.29% and 0.08% of the global carbon cycle, respectively. Meanwhile, the weathering proportion by sulfuric acids was relatively high with a CO2 release flux of 6.5 × 109 mol/yr. By compiling the data, we propose that the interfacial reaction kinetic and runoff control CO2 consumption rate by silicate and carbonate weathering, respectively. These results contribute to the understanding of modern weathering processes of loess in the CLP, thus helping to deduce the environmental and climatic evolution of the basin

EEG Based Dynamic Functional Connectivity Analysis in Mental Workload Tasks With Different Types of Information

The accurate evaluation of operators&#x2019; mental workload in human-machine systems plays an important role in ensuring the correct execution of tasks and the safety of operators. However, the performance of cross-task mental workload evaluation based on physiological metrics remains unsatisfactory. To explore the changes in dynamic functional connectivity properties with varying mental workload in different tasks, four mental workload tasks with different types of information were designed and a newly proposed dynamic brain network analysis method based on EEG microstate was applied in this paper. Six microstate topographies labeled as Microstate A-F were obtained to describe the task-state EEG dynamics, which was highly consistent with previous studies. Dynamic brain network analysis revealed that 15 nodes and 68 pairs of connectivity from the Frontal-Parietal region were sensitive to mental workload in all four tasks, indicating that these nodal metrics had potential to effectively evaluate mental workload in the cross-task scenario. The characteristic path length of Microstate D brain network in both Theta and Alpha bands decreased whereas the global efficiency increased significantly when the mental workload became higher, suggesting that the cognitive control network of brain tended to have higher function integration property under high mental workload state. Furthermore, by using a SVM classifier, an averaged classification accuracy of 95.8&#x0025; for within-task and 80.3&#x0025; for cross-task mental workload discrimination were achieved. Results implies that it is feasible to evaluate the cross-task mental workload using the dynamic functional connectivity metrics under specific microstate, which provided a new insight for understanding the neural mechanism of mental workload with different types of information

Screening Optimal Oat Varieties for Cultivation in Arid Areas in China: A Comprehensive Evaluation of Agronomic Traits

This study was undertaken to identify oat (Avena sativa L.) varieties optimal for cultivation in the Jiuquan region, China, in 2021. A selection of 27 domestic and international oat varieties were analyzed, considering ten key agronomic traits, including plant height, stem diameter, spike length, leaf width, and yield. Employing methods such as cluster analysis, principal component analysis, and grey correlation degree, a comprehensive evaluation was conducted. The principal component analysis distilled the ten indicators to three core components. The most influential factors in the first principal component were plant height, ear length, and hay yield, while leaf length and leaf area index were the highest contributors to the second component. The stem-to-leaf ratio emerged as the principal indicator in the third component. The cluster analysis resulted in the classification of the 27 oat varieties into 3 categories. Following a comprehensive evaluation through the grey correlation degree and principal component analysis methodologies, we found that the oat varieties Sweety 1, Fuyan 1, Dingyan 2, Baler, Quebec, and Longyan 2 received the highest scores. These varieties, hence, appear to be the most suitable for cultivation and promotion in the Jiuquan region. This study thus provides invaluable insights into oat cultivation practices, offering guidance for farmers, agricultural policymakers, and future research in the field

Atmospheric BTEX and carbonyls during summer seasons of 2008–2010 in Beijing

International audienceThe atmospheric concentrations of carbonyls and BTEX (benzene, toluene, ethylbenzene, m,p-xylene and o-xylene) were measured simultaneously in summers of Beijing from year 2008 to 2010. The total concentrations of formaldehyde, acetaldehyde and acetone in the consecutive summers, which were 33.4 μg m−3, 36.7 μg m−3 and 48.6 μg m−3, respectively, were much lower than those reported in the summers of 2005 (58.4 μg m−3) and 2006 (77.4 μg m−3). The concentrations of BTEX in the summers were 16 μg m−3, 21.5 μg m−3 and 15.4 μg m−3, respectively. The maximal contributions of photochemical reactions to atmospheric formaldehyde and acetaldehyde in the summers were estimated to be around 47.6–60.3%. The average ozone formation potentials (OFPs) for carbonyls and BTEX as well as carbon monoxide in summer of Beijing were calculated as 166.1 μg m−3, 65.4 μg m−3 and 100.8 μg m−3, respectively