Tuning the Interlayer Distance of Graphene Oxide as a Function of the Oxidation Degree for o-Toluidine Removal

Graphene oxide (GO) with different oxidation degrees is prepared by a modified Hummers' method varying KMnO4 amount from 0.5 to 6.0 g. X-ray powder diffraction (XRPD), micro-Raman, thermogravimetric analysis, X-ray photoeelectron spectroscopy, Boehm titrations, high-resolution transmission electron microscopy, and, finally, positron annihilation lifetime spectroscopy (PALS) are exploited to assess the properties of GO. Results show that increasing oxidant species can tune the interlayer gap between GO sheets up to a maximum value in the case of 4.0 g KMnO4 content. Moreover, these results validate the two-component-based model of GO in which, at low oxidation degree, there are unsplit/isolated graphene planes, instead at higher oxidant amounts, a five-layer sandwiched configuration occurs comprising graphene planes having functional groups decorating the edges (bwGO), hydrated oxidative debris (OD) and "empty" spaces (revealed by PALS as the distance between (bwGO + OD) two-component layers). In addition, by XRPD analysis, the total gap between two sheets is easily computed. In order to correlate these findings to pollutant removal capability, planar o-toluidine adsorption is studied. Since this molecule diffuses in an aqueous environment, the obtained adsorption percentages are compared to the thickness of the hydrated OD grafted onto bwGO. A strict connection between the pollutant removal efficacy and the variation of the hydrated interlayer distance is found

El teléfono móvil: disponibilidad, usos y relaciones por parte de los adolescentes entre 12 y 16 años

Presentamos los resultados de una investigación sobre el uso, la disponibilidad y algunos aspectos relativos a las relaciones que se establecen con diferentes personas en torno al teléfono móvil en una muestra de adolescentes (N=1211) entre 12 y 16 años de la provincia de Girona. Los resultados ponen de manifiesto la existencia de diferencias de género en cuanto a su disposición y uso, siendo las chicas las que en mayor porcentaje poseen un móvil y más horas dedican a usarlo. Los adolescentes prefieren hablar sobre lo que hacen con el móvil con los iguales, seguido de los hermanos o las hermanas y, en último lugar, con los adultos (progenitores y profesores o profesoras). Finalmente, se analiza cómo los adolescentes se muestran más interesados por e informados sobre Internet y el móvil en comparación con los otros cuatro medios audiovisuales explorados (televisión, ordenador, juegos para ordenador y videojuegos)

Detection of VOCs Traces by Graphene Oxide-Metal Oxide Gas Sensors

The sensing of gas molecules is of fundamental importance for environmental monitoring, control of chemical processes, medical applications, and so on [1-3]. In recent years, graphene-based gas sensors have attracted much attention due to enhanced graphene thermo-electric conductivity, surface area and mechanical strength. Thus, different structures have been developed and high sensing performances and room temperature working conditions were achieved [2,4]. However, they still suffer from several problems, which could be overcome by covering the graphene surface with metal oxide nanoparticles [2]. Furthermore, studies regarding the detection of Volatile Organic Compounds (VOCs) are still at the beginning [3]. Hence, the present work will be aimed at: i) optimizing the synthetic routes of ad hoc composite VOCs sensing materials (based on graphene oxide/SnO2 or ZnO hybrids) and their deep physico-chemical characterizations; ii) engineering the gas sensor device; and iii) evaluating the sensing performances at both high and mild temperatures (also exploiting the UV light) towards gaseous ethanol, acetone and ethylbenzene. Starting from pure graphite, graphene oxide (GO) powder was synthesized by adopting the Hummer\u2019s modified method [5]. The synthetic route was deeply investigated by modulating both the starting carbon material (powder or flakes graphite) and the concentration of the H2O2 (i.e. the quenching/oxidizing agent), thus tailoring the final GO surface/structural properties (TEM images in Fig. 1a and 1b). Once optimized this step, SnO2 or ZnO were grown on its surface by a hydrothermal method, varying the starting salt precursor/GO weight ratio between 4 and 32 (Fig. 1c and 1d). For comparison, pure SnO2 and ZnO (both commercial and home-made) were also tested. Several physico-chemical techniques have been used to characterize all the as-prepared nanopowders, such as XRPD, Raman, FTIR, XPS and TEM analyses. Subsequently, a homogeneous layer was deposited by spraying technique onto Pt-Interdigitated Electrodes (IDEs) starting from an ethanol suspension of each sample (2.0\u20132.5 mg mL-1). Then, gaseous ethanol, acetone and the less studied ethylbenzene were sensed, obtaining very promising results (in terms of both response/recovery time and sensibility down to ppb levels) for either pure and hybrid materials at 350\ub0C, and at lower temperatures (150\ub0C to 30\ub0C) for the graphene-based samples. Hence, these powders may represent very potential candidates for the gas sensing of highly toxic VOCs traces, both for environmental [1] and medical [3] diagnosis purposes

Exploring SnxTi1-xO2 Solid Solutions Grown onto Graphene Oxide (GO) as Selective Toluene Gas Sensors

The major drawback of oxide-based sensors is the lack of selectivity. In this context, SnxTi1- xO2/graphene oxide (GO)-based materials were synthesized via a simple hydrothermal route, varying the titanium content in the tin dioxide matrix. Then, toluene and acetone gas sensing performances of the as-prepared sensors were systematically investigated. Specifically, by using 32:1 SnO2/GO and 32:1 TiO2/GO, a greater selectivity towards acetone analyte, also at room temperature, was obtained even at ppb level. However, solid solutions possessing a higher content of tin relative to titanium (as 32:1 Sn0.55Ti0.45O2/GO) exhibited higher selectivity towards bigger and non-polar molecules (such as toluene) at 350 \ub0C, rather than acetone. A deep experimental investigation of structural (XRPD and Raman), morphological (SEM, TEM, BET surface area and pores volume) and surface (XPS analyses) properties allowed us to give a feasible explanation of the different selectivity. Moreover, by exploiting the UV light, the lowest operating temperature to obtain a significant and reliable signal was 250 \ub0C, keeping the greater selectivity to the toluene analyte. Hence, the feasibility of tuning the chemical selectivity by engineering the relative amount of SnO2 and TiO2 is a promising feature that may guide the future development of miniaturized chemoresistors

Butterfly distribution along altitudinal gradients: temporal changes over a short time period

Mountain ecosystems are particularly sensitive to changes in climate and land cover, but at the same time, they can offer important refuges for species on the opposite of the more altered lowlands. To explore the potential role of mountain ecosystems in butterfly conservation and to assess the vulnerability of the alpine species, we analyzed the short-term changes (2006-2008 vs. 2012-2013) of butterflies\u27 distribution along altitudinal gradients in the NW Italian Alps. We sampled butterfly communities once a month (62 sampling stations, 3 seasonal replicates per year, from June to August) by semi-quantitative sampling techniques. The monitored gradient ranges from the montane to the alpine belt (600-2700 m a.s.l.) within three protected areas: Gran Paradiso National Park (LTER, Sitecode: LTER_EU_IT_109), Orsiera Rocciavr? Natural Park and Veglia Devero Natural Park. We investigated butterflies\u27 temporal changes in accordance with a hierarchical approach to assess potential relationships between species and community level. As a first step, we characterized each species in terms of habitat requirements, elevational range and temperature preferences and we compared plot occupancy and altitudinal range changes between time periods (2006-2008 vs. 2012-2013). Secondly, we focused on community level, analyzing species richness and community composition temporal changes. The species level analysis highlighted a general increase in mean occupancy level and significant changes at both altitudinal boundaries. Looking at the ecological groups, we observed an increase of generalist and highly mobile species at the expense of the specialist and less mobile ones. For the community level, we noticed a significant increase in species richness, in the community temperature index and a tendency towards homogenization within communities. Besides the short time period considered, butterflies species distribution and communities changed considerably. In light of these results, it is fundamental to continue monitoring activities to understand if we are facing transient changes or first signals of an imminent trend

An electrochemical outlook upon the gaseous ethanol sensing by graphene oxide-SnO2 hybrid materials

Breakthroughs in the synthesis of hybrid materials have led to the development of a plethora of chemiresistors that could operate at lower and lower temperatures. Herein, we report the fabrication of novel composite ma- terials (SnO2-GO 4:1, 8:1 and 16:1) based on graphene oxide (GO) sheets decorated with tin dioxide nano- particles, through a controlled chemical growth. We succeeded in obtaining widely spaced isles of the metal oxide on the carbonaceous material, thus enhancing the electron transfer process (i.e. favored convergent dif- fusion, as investigated through cyclic voltammetric analysis), which plays a pivotal role for the final sensing behavior. Indeed, only with SnO2-GO 16:1 sample, superior responses towards gaseous ethanol were observed both at 150 \ub0C and at RT (by exploiting the UV light), with respect to pristine SnO2 and mechanically prepared SnO2(16)@GO material. Particularly, an improvement of the sensitivity (down to 10 ppb), response and recovery times (about of 60\u201370 s) was assessed. Besides, all the powders were finely characterized on structural (XRPD, FTIR and Raman spectroscopies), surface (active surface area, pores volume, XPS), morphological (SEM, TEM) and electrochemical (cyclic voltammetries) points of view, confirming the effective growth of SnO2 nano- particles on the GO sheets