A Synchrotron X-ray diffraction deconvolution method for the measurement of residual stress in thermal barrier coatings as a function of depth

The average residual stress distribution as a function of depth in an air plasma-sprayed yttria stabilized zirconia top coat used in thermal barrier coating (TBC) systems was measured using synchrotron radiation X-ray diffraction in reflection geometry on station I15 at Diamond Light Source, UK, employing a series of incidence angles. The stress values were calculated from data deconvoluted from diffraction patterns collected at increasing depths. The stress was found to be compressive through the thickness of the TBC and a fluctuation in the trend of the stress profile was indicated in some samples. Typically this fluctuation was observed to increase from the surface to the middle of the coating, decrease a little and then increase again towards the interface. The stress at the interface region was observed to be around 300 MPa, which agrees well with the reported values. The trend of the observed residual stress was found to be related to the crack distribution in the samples, in particular a large crack propagating from the middle of the coating. The method shows promise for the development of a nondestructive test for as-manufactured samples

Enhanced hyperspectral tomography for bioimaging by spatiospectral reconstruction.

From Europe PMC via Jisc Publications RouterHistory: ppub 2021-10-01, epub 2021-10-21Publication status: PublishedHere we apply hyperspectral bright field imaging to collect computed tomographic images with excellent energy resolution (~ 1 keV), applying it for the first time to map the distribution of stain in a fixed biological sample through its characteristic K-edge. Conventionally, because the photons detected at each pixel are distributed across as many as 200 energy channels, energy-selective images are characterised by low count-rates and poor signal-to-noise ratio. This means high X-ray exposures, long scan times and high doses are required to image unique spectral markers. Here, we achieve high quality energy-dispersive tomograms from low dose, noisy datasets using a dedicated iterative reconstruction algorithm. This exploits the spatial smoothness and inter-channel structural correlation in the spectral domain using two carefully chosen regularisation terms. For a multi-phase phantom, a reduction in scan time of 36 times is demonstrated. Spectral analysis methods including K-edge subtraction and absorption step-size fitting are evaluated for an ex vivo, single (iodine)-stained biological sample, where low chemical concentration and inhomogeneous distribution can affect soft tissue segmentation and visualisation. The reconstruction algorithms are available through the open-source Core Imaging Library. Taken together, these tools offer new capabilities for visualisation and elemental mapping, with promising applications for multiply-stained biological specimens

High-energy synchrotron X-ray tomography coupled with digital image correlation highlights likely failure points inside ITER toroidal field conductors

From Springer Nature via Jisc Publications RouterHistory: received 2021-02-01, accepted 2021-10-22, registration 2021-11-09, pub-electronic 2021-11-30, online 2021-11-30, collection 2021-12Publication status: PublishedFunder: Engineering and Physical Sciences Research Council; doi: http://dx.doi.org/10.13039/501100000266; Grant(s): EP/M010619/1Abstract: Two sections of heat-treated (HT) and non-heat-treated (NHT) Cable-in-Conduit Conductor (CICC) of a design similar to the ITER tokomak have been imaged using very high energy X-ray tomography at the ESRF beamline ID19. The sample images were collected at four temperatures down to 77 K. These results showed a greater degree of movement, bundle distortion and touching strands in the NHT sample. The HT sample showed non-linear movements with temperature especially close to 77 K; increasing non-circularity of the superconducting fibre bundles towards the periphery of the CICC, and touching bundles throughout the CICC. The images have highlighted where future design might improve potential weakness, in particular at the outer perimeters of the conductor and the individual sub-cable, ‘petal’ wraps

Strain evolution during hydride precipitation in Zircaloy-4 observed with synchrotron X-ray diffraction

Synchrotron X-ray diffraction was used to evaluate strain evolution observed in Zircaloy-4 undergoing hydride precipitation during a range of thermal operations. During continuous heating, a change in the constraining effect of the matrix was observed at a temperature of 280 °C, thought to be the result of matrix dilatation from interstitial hydrogen. A deconvolution of the thermal, chemical and mechanical sources of strain during quench and dwell operations identified a non-negligible mechanical effect in the matrix. During these dwells, slow strain rate relaxation of elastic strains was seen in the matrix and hydride, suggesting that time dependent relaxation of misfit stresses may be possible at reactor relevant temperatures. Notable anisotropy was observed between the rolling and transverse directions, identified as being the likely product of a similar anisotropy in the relaxation of the hydride misfit between the α and α matrix directions, owing to the differing coherency of these two interfaces