1,719 research outputs found
Image Display and Manipulation System (IDAMS) program documentation, Appendixes A-D
The IDAMS Processor is a package of task routines and support software that performs convolution filtering, image expansion, fast Fourier transformation, and other operations on a digital image tape. A unique task control card for that program, together with any necessary parameter cards, selects each processing technique to be applied to the input image. A variable number of tasks can be selected for execution by including the proper task and parameter cards in the input deck. An executive maintains control of the run; it initiates execution of each task in turn and handles any necessary error processing
Image Display And Manipulation System (IDAMS), user's guide
A combination operator's guide and user's handbook for the Image Display and Manipulation System (IDAMS) is reported. Information is presented to define how to operate the computer equipment, how to structure a run deck, and how to select parameters necessary for executing a sequence of IDAMS task routines. If more detailed information is needed on any IDAMS program, see the IDAMS program documentation
A Side of Mercury Not Seen By Mariner 10
More than 60,000 images of Mercury were taken at ~29 deg elevation during two
sunrises, at 820 nm, and through a 1.35 m diameter off-axis aperture on the
SOAR telescope. The sharpest resolve 0.2" (140 km) and cover 190-300 deg
longitude -- a swath unseen by the Mariner 10 spacecraft -- at complementary
phase angles to previous ground-based optical imagery. Our view is comparable
to that of the Moon through weak binoculars. Evident are the large crater
Mozart shadowed on the terminator, fresh rayed craters, and other albedo
features keyed to topography and radar reflectivity, including the putative
huge ``Basin S'' on the limb. Classical bright feature Liguria resolves across
the northwest boundary of the Caloris basin into a bright splotch centered on a
sharp, 20 km diameter radar crater, and is the brightest feature within a
prominent darker ``cap'' (Hermean feature Solitudo Phoenicis) that covers the
northern hemisphere between longitudes 140-250 deg. The cap may result from
space weathering that darkens via a magnetically enhanced flux of the solar
wind, or that reddens low latitudes via high solar insolation.Comment: 7 pages, 4 PDF figures, pdfLaTeX, typos corrected, Fig. 2 modified
slightly to add crater diameters not given in published versio
Modal Test and Analysis of the NASA Tiltrotor Test Rig
The Tiltrotor Test Rig (TTR) is being developed at the NASA Ames Research Center for testing full-scaleproprotors in the National Full-scale Aerodynamics Complex (NFAC) wind tunnel. The TTR is currentlyundergoing checkout testing to ensure its proper functionality. Part of the checkout process is a groundvibration test, or shake test, to characterize the modal characteristics of the test rig once it is installed in the wind tunnel. This paper presents a summary of the shake test procedure and an overview of the test results. The results include frequency response functions for a number of different test configurations as well as visualizations of the major mode shapes. Excitation methods included random and swept sine shaking as well as hammer impacts. At the conclusion of this paper, some recommendations are given for future shake tests
Conformal smectics and their many metrics
We establish that equally spaced smectic configurations enjoy an infinite-dimensional conformal symmetry and show that there is a natural map between them and null hypersurfaces in maximally symmetric spacetimes. By choosing the appropriate conformal factor it is possible to restore additional symmetries of focal structures only found before for smectics on flat substrates
RICIS research
The principle focus of one of the RICIS (Research Institute for Computing and Information Systems) components is computer systems and software engineering in-the-large of the lifecycle of large, complex, distributed systems which: (1) evolve incrementally over a long time; (2) contain non-stop components; and (3) must simultaneously satisfy a prioritized balance of mission and safety critical requirements at run time. This focus is extremely important because of the contribution of the scaling direction problem to the current software crisis. The Computer Systems and Software Engineering (CSSE) component addresses the lifestyle issues of three environments: host, integration, and target
Device and method for measuring thermal conductivity of thin films
A device and method are provided for measuring the thermal conductivity of rigid or flexible, homogeneous or heterogeneous, thin films between 50 .mu.m and 150 .mu.m thick with relative standard deviations of less than five percent. The specimen is sandwiched between like material, highly conductive upper and lower slabs. Each slab is instrumented with six thermocouples embedded within the slab and flush with their corresponding surfaces. A heat source heats the lower slab and a heat sink cools the upper slab. The heat sink also provides sufficient contact pressure onto the specimen. Testing is performed within a vacuum environment (bell-jar) between 10.sup.-3 to 10.sup.-6 Torr. An anti-radiant shield on the interior surface of the bell-jar is used to avoid radiation heat losses. Insulation is placed adjacent to the heat source and adjacent to the heat sink to prevent conduction losses. A temperature controlled water circulator circulates water from a constant temperature bath through the heat sink. Fourier's one-dimensional law of heat conduction is the governing equation. Data, including temperatures, are measured with a multi-channel data acquisition system. On-line computer processing is used for thermal conductivity calculations
- …