Short paper: From streaming data to linked data. A case study with bike sharing systems

Current methods and tools that support Linked Data publication have mainly focused so far on static data, without considering the growing amount of streaming data available on the Web. In this paper we describe a case study that involves the publication of static and streaming Linked Data for bike sharing systems and related entities. We describe some of the challenges that we have faced, the solutions that we have explored, the lessons that we have learned, and the opportunities that lie in the future for exploiting Linked Stream Data

Ophthalmoplegic Migraine and Infundibular Dilatation of a Cerebral Artery

Ophthalmoplegic migraine (OM) is a childhood disorder of uncertain etiology manifesting recurrent unilateral headache associated with a transitory oculomotor (usually IIIrd nerve) palsy. Recent publications emphasize the finding on MRI of contrast enhancement in the IIIrd nerve suggesting that OM may be a recurrent inflammatory neuropathy. We report the case of a 7-year-old boy with typical symptoms of this disorder. Angio MR and Angio CT revealed the presence of an infundibular dilatation of a perforating branch of the posterior cerebral artery adjacent to the symptomatic IIIrd nerve. We speculate that this and perhaps other cases of OM may have a different pathophysiology related to compression of the IIIrd nerve by an adjacent vascular structure that could activate the trigeminovascular system and produce migrainous pain

Symmetric vs asymmetric protection levels in SDC methods for tabular data

The final publication is available at link.springer.comProtection levels on sensitive cells—which are key parameters of any statistical disclosure control method for tabular data—are related to the difficulty of any attacker to recompute a good estimation of the true cell values. Those protection levels are two numbers (one for the lower protection, the other for the upper protection) imposing a safety interval around the cell value, that is, no attacker should be able to recompute an estimate within such safety interval. In the symmetric case the lower and upper protection levels are equal; otherwise they are referred as asymmetric protection levels. In this work we empirically study the effect of symmetry in protection levels for three protection methods: cell suppression problem (CSP), controlled tabular adjustment (CTA), and interval protection (IP). Since CSP and CTA are mixed integer linear optimization problems, it is seen that the symmetry (or not) of protection levels affect to the CPU time needed to compute a solution. For IP, a linear optimization problem, it is observed that the symmetry heavily affects to the quality of the solution provided rather than to the solution time.Peer ReviewedPostprint (author's final draft

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials

Particle dynamics near extreme Kerr throat and supersymmetry

The extreme Kerr throat solution is believed to be non-supersymmetric. However, its isometry group SO(2,1) x U(1) matches precisely the bosonic subgroup of N=2 superconformal group in one dimension. In this paper we construct N=2 supersymmetric extension of a massive particle moving near the horizon of the extreme Kerr black hole. Bosonic conserved charges are related to Killing vectors in a conventional way. Geometric interpretation of supersymmetry charges remains a challenge.Comment: V2: 10 pages; discussion in sect. 4 and 5 extended, acknowledgements and references adde

Punctate Inner Choroidopathy: A Systematic Review

This article reviews clinically relevant data regarding punctate inner choroidopathy, mainly the various treatment options. Punctate inner choroidopathy is an uncommon, inflammatory, multifocal chorioretinopathy affecting mostly young myopic women. It is characterized by the presence of multiple, small, well-defined, yellow-white fundus lesions, in the absence of intraocular inflammation. We describe etiology, clinical findings and ancillary tests that help in the diagnosis and detection of complications. Treatment options that have been used to manage patients with PIC and CNV include immunosuppressants, corticoids, laser photocoagulation, photodynamic therapy, intravitreal anti-VEGF agents and submacular surgery

Electric Field Effects on Graphene Materials

Understanding the effect of electric fields on the physical and chemical properties of two-dimensional (2D) nanostructures is instrumental in the design of novel electronic and optoelectronic devices. Several of those properties are characterized in terms of the dielectric constant which play an important role on capacitance, conductivity, screening, dielectric losses and refractive index. Here we review our recent theoretical studies using density functional calculations including van der Waals interactions on two types of layered materials of similar two-dimensional molecular geometry but remarkably different electronic structures, that is, graphene and molybdenum disulphide (MoS$_2$). We focus on such two-dimensional crystals because of they complementary physical and chemical properties, and the appealing interest to incorporate them in the next generation of electronic and optoelectronic devices. We predict that the effective dielectric constant ($\varepsilon$) of few-layer graphene and MoS$_2$ is tunable by external electric fields ($E_{\rm ext}$). We show that at low fields ($E_{\rm ext}^{}<0.01$ V/\AA) $\varepsilon$ assumes a nearly constant value $\sim$4 for both materials, but increases at higher fields to values that depend on the layer thickness. The thicker the structure the stronger is the modulation of $\varepsilon$ with the electric field. Increasing of the external field perpendicular to the layer surface above a critical value can drive the systems to an unstable state where the layers are weakly coupled and can be easily separated. The observed dependence of $\varepsilon$ on the external field is due to charge polarization driven by the bias, which show several similar characteristics despite of the layer considered.Comment: Invited book chapter on Exotic Properties of Carbon Nanomatter: Advances in Physics and Chemistry, Springer Series on Carbon Materials. Editors: Mihai V. Putz and Ottorino Ori (11 pages, 4 figures, 30 references

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in DesignThis case study was aimed at measuring and assessing the potential improvements that could be made on the eco-efficiency performance of a composite materials’ industry, specifically a glass fibre reinforced plastic (GFRP) pultrusion manufacturing company. For this purpose, all the issues involved in the pultrusion process of GFRP profiles were analysed, the current ecoefficiency performance of the company was determined, all the procedures applied in the production process were revised, and improvement strategies were planned and investigated with basis on the performed analysis. The new eco-efficiency ratios were estimated taking into account the implementation of new proceedings and procedures through re-engineering the manufacturing process and recycling approaches. These features lead to significant improvements on the sequent assessed eco-efficiency ratios, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles

Punctate Inner Choroidopathy: A Systematic Review

This article reviews clinically relevant data regarding punctate inner choroidopathy, mainly the various treatment options. Punctate inner choroidopathy is an uncommon, inflammatory, multifocal chorioretinopathy affecting mostly young myopic women. It is characterized by the presence of multiple, small, well-defined, yellow-white fundus lesions, in the absence of intraocular inflammation. We describe etiology, clinical findings and ancillary tests that help in the diagnosis and detection of complications. Treatment options that have been used to manage patients with PIC and CNV include immunosuppressants, corticoids, laser photocoagulation, photodynamic therapy, intravitreal anti-VEGF agents and submacular surgery

Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars