Synthesis of block copolymers by the conversion of living anionic polymerisation into living ROMP

A methodology for the synthesis of well-defined block copolymers from living anionic polymerisation and ring opening metathesis polymerisation (ROMP) using well-defined ruthenium alkylidene initiators has been developed. Polymers synthesised by anionic polymerisation were converted into macromonomers, which were used as precursor polymers to well-defined ruthenium macroinitiators for ROMP. The macroinitiators were synthesised by an olefin metathesis reaction, involving alkylidene exchange of Ru(Cl(_2)(=CHEt)(PCy(_3))(_2) with the macromonomers. The ROMP of norbornene (NBE) derivatives using the macroinitiators resulted in the synthesis of block copolymers. These copolymers possessed low polydispersity indices (typically 1.2 or less) and contained small quantities or none of the anionically polymerised homopolymer.Poly(ethylene oxide) (PEO) macromonomers were synthesised by terminating living PEO with 4-vinylbenzyl chloride. The PEO macromonomers were used to synthesise block copolymers of ethylene oxide (EO) and NBE derivatives. Polystyrene (PS) macromonomers were prepared by Williamson coupling of hydroxyl functionalised PS and 4-VBC. The hydroxyl functionalised PS was synthesised by end functionalising living PS with EO or by incorporating a hydroxy functionality into the initiator in a protected form. Copolymers of styrene and NBE derivatives were produced using the PS macromonomers. The applicability of this methodology to other monomers that can be polymerised by an anionic mechanism was examined. The ROMP monomers included NBE derivatives with imide, dicarboxylic ester and chloromethyl groups, illustrating the range of functionalities that can be incorporated into the ROMP block using this methodology

¿Recaudar o facilitar? ¡Gran dilema de la administración aduanera!

Luego de haber transcurrido cuatro años desde la fusión entre SUNAT y ADUANAS (ahora ambas denominadas Superintendencia Nacional de Administración Tributaria -SUNAT), resulta oportuno hacer una breve reflexión sobre lo que, desde nuestro punto de vista, debería ser considerado, por la Administración Aduanera, como un Principio del derecho aduanero: <<facilitar el comercio exterior», a pesar que el Texto Único Ordenado (TUO) de la Ley General de Aduanas1 no lo califica expresamente como tal

Development and Experimental Evaluation of Passive Fuel Cell Thermal Control

To provide uniform cooling for a fuel cell stack, a cooling plate concept was evaluated. This concept utilized thin cooling plates to extract heat from the interior of a fuel cell stack and move this heat to a cooling manifold where it can be transferred to an external cooling fluid. The advantages of this cooling approach include a reduced number of ancillary components and the ability to directly utilize an external cooling fluid loop for cooling the fuel cell stack. A number of different types of cooling plates and manifolds were developed. The cooling plates consisted of two main types; a plate based on thermopyrolytic graphite (TPG) and a planar (or flat plate) heat pipe. The plates, along with solid metal control samples, were tested for both thermal and electrical conductivity. To transfer heat from the cooling plates to the cooling fluid, a number of manifold designs utilizing various materials were devised, constructed, and tested. A key aspect of the manifold was that it had to be electrically nonconductive so it would not short out the fuel cell stack during operation. Different manifold and cooling plate configurations were tested in a vacuum chamber to minimize convective heat losses. Cooling plates were placed in the grooves within the manifolds and heated with surface-mounted electric pad heaters. The plate temperature and its thermal distribution were recorded for all tested combinations of manifold cooling flow rates and heater power loads. This testing simulated the performance of the cooling plates and manifold within an operational fuel cell stack. Different types of control valves and control schemes were tested and evaluated based on their ability to maintain a constant temperature of the cooling plates. The control valves regulated the cooling fluid flow through the manifold, thereby controlling the heat flow to the cooling fluid. Through this work, a cooling plate and manifold system was developed that could maintain the cooling plates within a minimal temperature band with negligible thermal gradients over power profiles that would be experienced within an operating fuel cell stack

Cassegrain Solar Concentrator System for ISRU Material Processing

A 0.5 m diameter Cassegrain concentrator was constructed as a means of providing highly concentrated sunlight for the demonstration processing of lunar simulated regolith and other NASA In-Situ Resource Utilization Project (ISRU) reaction processes. The concentrator is constructed of aluminum with a concentration ratio of approximately 3000 to 1. The concentrator focuses solar energy into a movable tray located behind the concentrator. This tray can hold simulated regolith or any other material and or device to be tested with concentrated solar energy. The tray is movable in one axis. A 2-axis extended optical system was also designed and fabricated. The extended optical system is added to the back of the primary concentrator in place of the moveable test tray and associated apparatus. With this optical system the focused sunlight can be extended from the back of the primary concentrator toward the ground with the added advantage of moving the focal point axially and laterally relative to the ground. This allows holding the focal point at a fixed position on the ground as the primary concentrator tracks the sun. Also, by design, the focal point size was reduced via the extended optics by a factor of 2 and results in a concentration ratio for the system of approximately 6,000 to 1.The designs of both optical systems are discussed. The results from simulated regolith melting tests are presented as well as the operational experience of utilizing the Cassegrain concentrator system

Design and Fabrication of a Dielectric Total Internal Reflecting Solar Concentrator and Associated Flux Extractor for Extreme High Temperature (2500K) Applications

The Analex Corporation, under contract to the NASA Lewis Research Center (LeRC), Cleveland, Ohio, recently evaluated the feasibility of utilizing refractive secondary concentrators for solar heat receivers operating at temperatures up to 2500K. The feasibility study pointed out a number of significant advantages provided by solid single crystal refractive devices over the more conventional hollow reflective compound parabolic concentrators (CPCs). In addition to the advantages of higher concentration ratio and efficiency, the refractive concentrator, when combined with a flux extractor rod, provides for flux tailoring within the heat receiver cavity. This is a highly desirable, almost mandatory, feature for solar thermal propulsion engine designs presently being considered for NASA and Air Force thermal applications. Following the feasibility evaluation, the NASA-LeRC, NASA-Marshall Space Flight Center (MSFC), and Analex Corporation teamed up to design, fabricate, and test a refractive secondary concentrator/flux extractor system for potential use in the NASA-MSFC "Shooting Star" flight experiment. This paper describes the advantages and technical challenges associated with the design methodologies developed and utilized and the material and fabrication limitations encountered

Autonomy Operating System for UAVs: Pilot-in-a-Box

The Autonomy Operating System (AOS) is an open flight software platform with Artificial Intelligence for smart UAVs. It is built to be extendable with new apps, similar to smartphones, to enable an expanding set of missions and capabilities. AOS has as its foundations NASAs core flight executive and core flight software (cFEcFS). Pilot-in-a-Box (PIB) is an expanding collection of interacting AOS apps that provide the knowledge and intelligence onboard a UAV to safely and autonomously fly in the National Air Space, eventually without a remote human ground crew. Longer-term, the goal of PIB is to provide the capability for pilotless air vehicles such as air taxis that will be key for new transportation concepts such as mobility-on-demand. PIB provides the procedural knowledge, situational awareness, and anticipatory planning (thinking ahead of the plane) that comprises pilot competencies. These competencies together with a natural language interface will enable Pilot-in-a-Box to dialogue directly with Air Traffic Management from takeoff through landing. This paper describes the overall AOS architecture, Artificial Intelligence reasoning engines, Pilot-in-a-box competencies, and selected experimental flight tests to date

Risk Factors for Cervical Precancer and Cancer in HIV-Infected, HPV-Positive Rwandan Women

Although cervical cancer is an AIDS-defining condition, infection with human immunodeficiency virus (HIV) may only modestly increase the risk of cervical cancer. There is a paucity of information regarding factors that influence the natural history of human papillomavirus (HPV) in HIV-infected women. We examined factors associated with cervical intraepithelial neoplasia grade 3 or cancer (CIN3+) in Rwandan women infected with both HIV and HPV (HIV+/HPV+).In 2005, 710 HIV+ Rwandan women ≥25 years enrolled in an observational cohort study; 476 (67%) tested HPV+. Each woman provided sociodemographic data, CD4 count, a cervical cytology specimen and cervicovaginal lavage (CVL), which was tested for >40 HPV genotypes by MY09/MY11 PCR assay. Logistic regression models calculated odds ratios (OR) and 95% confidence intervals (CI) of associations of potential risk factors for CIN3+ among HIV+/HPV+ women.Of the 476 HIV+/HPV+ women 42 (8.8%) were diagnosed with CIN3+. Factors associated with CIN3+ included ≥7 (vs. 0-2) pregnancies, malarial infection in the previous six months (vs. never), and ≥7 (vs. 0-2) lifetime sexual partners. Compared to women infected by non-HPV16 carcinogenic HPV genotypes, HPV16 infection was positively associated and non-carcinogenic HPV infection was inversely associated with CIN3+. CD4 count was significantly associated with CIN3+ only in analyses of women with non-HPV16 carcinogenic HPV (OR = 0.62 per 100 cells/mm(3), CI = 0.40-0.97).In this HIV+/HPV+ population, lower CD4 was significantly associated with CIN3+ only in women infected with carcinogenic non-HPV16. We found a trend for higher risk of CIN3+ in HIV+ women reporting recent malarial infection; this association should be investigated in a larger group of HIV+/HPV+ women

Risk Factors for Cervical Precancer and Cancer in HIV-Infected, HPV-Positive Rwandan Women

Background: Although cervical cancer is an AIDS-defining condition, infection with human immunodeficiency virus (HIV) may only modestly increase the risk of cervical cancer. There is a paucity of information regarding factors that influence the natural history of human papillomavirus (HPV) in HIV-infected women. We examined factors associated with cervical intraepithelial neoplasia grade 3 or cancer (CIN3+) in Rwandan women infected with both HIV and HPV (HIV+/HPV+).Methods: In 2005, 710 HIV+ Rwandan women ≥25 years enrolled in an observational cohort study; 476 (67%) tested HPV+. Each woman provided sociodemographic data, CD4 count, a cervical cytology specimen and cervicovaginal lavage (CVL), which was tested for >40 HPV genotypes by MY09/MY11 PCR assay. Logistic regression models calculated odds ratios (OR) and 95% confidence intervals (CI) of associations of potential risk factors for CIN3+ among HIV+/HPV+ women.Results: Of the 476 HIV+/HPV+ women 42 (8.8%) were diagnosed with CIN3+. Factors associated with CIN3+ included ≥7 (vs. 0-2) pregnancies, malarial infection in the previous six months (vs. never), and ≥7 (vs. 0-2) lifetime sexual partners. Compared to women infected by non-HPV16 carcinogenic HPV genotypes, HPV16 infection was positively associated and non-carcinogenic HPV infection was inversely associated with CIN3+. CD4 count was significantly associated with CIN3+ only in analyses of women with non-HPV16 carcinogenic HPV (OR = 0.62 per 100 cells/mm3, CI = 0.40-0.97).Conclusions: In this HIV+/HPV+ population, lower CD4 was significantly associated with CIN3+ only in women infected with carcinogenic non-HPV16. We found a trend for higher risk of CIN3+ in HIV+ women reporting recent malarial infection; this association should be investigated in a larger group of HIV+/HPV+ women.</p

The burden of unintentional drowning: Global, regional and national estimates of mortality from the global burden of disease 2017 study

Background: Drowning is a leading cause of injury-related mortality globally. Unintentional drowning (International Classification of Diseases (ICD) 10 codes W65-74 and ICD9 E910) is one of the 30 mutually exclusive and collectively exhaustive causes of injury-related mortality in the Global Burden of Disease (GBD) study. This study\u27s objective is to describe unintentional drowning using GBD estimates from 1990 to 2017.Methods: Unintentional drowning from GBD 2017 was estimated for cause-specific mortality and years of life lost (YLLs), age, sex, country, region, Socio-demographic Index (SDI) quintile, and trends from 1990 to 2017. GBD 2017 used standard GBD methods for estimating mortality from drowning.Results: Globally, unintentional drowning mortality decreased by 44.5% between 1990 and 2017, from 531 956 (uncertainty interval (UI): 484 107 to 572 854) to 295 210 (284 493 to 306 187) deaths. Global age-standardised mortality rates decreased 57.4%, from 9.3 (8.5 to 10.0) in 1990 to 4.0 (3.8 to 4.1) per 100 000 per annum in 2017. Unintentional drowning-associated mortality was generally higher in children, males and in low-SDI to middle-SDI countries. China, India, Pakistan and Bangladesh accounted for 51.2% of all drowning deaths in 2017. Oceania was the region with the highest rate of age-standardised YLLs in 2017, with 45 434 (40 850 to 50 539) YLLs per 100 000 across both sexes.Conclusions: There has been a decline in global drowning rates. This study shows that the decline was not consistent across countries. The results reinforce the need for continued and improved policy, prevention and research efforts, with a focus on low- and middle-income countries