581 research outputs found
Dimpling process in cold roll metal forming by finite element modelling and experimental validation
The dimpling process is a novel cold-roll forming process that involves dimpling of a rolled flat strip prior to the roll forming operation. This is a process undertaken to enhance the material properties and subsequent productsâ structural performance while maintaining a minimum strip thickness. In order to understand the complex and interrelated nonlinear changes in contact, geometry and material properties that occur in the process, it is necessary to accurately simulate the process and validate through physical tests. In this paper, 3D non-linear finite element analysis was employed to simulate the dimpling process and mechanical testing of the subsequent dimpled sheets, in which the dimple geometry and material properties data were directly transferred from the dimpling process. Physical measurements, tensile and bending tests on dimpled sheet steel were conducted to evaluate the simulation results. Simulation of the dimpling process identified the amount of non-uniform plastic strain introduced and the manner in which this was distributed through the sheet. The plastic strain resulted in strain hardening which could correlate to the increase in the strength of the dimpled steel when compared to plain steel originating from the same coil material. A parametric study revealed that the amount of plastic strain depends upon on the process parameters such as friction and overlapping gap between the two forming rolls. The results derived from simulations of the tensile and bending tests were in good agreement with the experimental ones. The validation indicates that the finite element analysis was able to successfully simulate the dimpling process and mechanical properties of the subsequent dimpled steel products
Relaxation of Vibrational Excitons in Molecular-Ionic Crystal s Measured by Picosecond Time-Resolved CARS
The decay times of the internal vibrations in K2S04, KCl04, NaN03 and CaC03 single crystals have been measured at different temperature s by picosecond time-resolved CARS. The low temperature experimental data and their temperature dependence are interpreted on the basis of an energy relaxation mechanism, involving two-phonon and higher order decay processes
Canal shaping with WaveOne Primary reciprocating files and ProTaper system: a comparative study
The impact of direct oral anticoagulants on viscoelastic testing â A systematic review
Background: In case of bleeding patients and in acute care, the assessment of residual direct oral anticoagulant (DOAC) activity is essential for evaluating the potential impact on hemostasis, especially when a timely decision on urgent surgery or intervention is required. Viscoelastic tests are crucial in a modern goal-directed coagulation management to assess patients' coagulation status. However, the role of viscoelastic test to detect and quantify residual DOAC plasma levels is controversially discussed. The aim of this review was to systematically summarize the evidence of viscoelastic tests for the assessment of residual DOAC activity.
Method: PubMed, Embase, Scopus, and the Cochrane Library were searched for original articles investigating the effect of rivaroxaban, apixaban, edoxaban, or dabigatran plasma levels on different viscoelastic tests of the adult population from database inception to December 31, 2021.
Results: We included 53 studies from which 31 assessed rivaroxaban, 22 apixaban, six edoxaban, and 29 dabigatran. The performance of viscoelastic tests varied across DOACs and assays. DOAC specific assays are more sensitive than unspecific assays. The plasma concentration of rivaroxaban and dabigatran correlates strongly with the ROTEM EXTEM, ClotPro RVV-test or ECA-test clotting time (CT) and TEG 6s anti-factor Xa (AFXa) or direct thrombin inhibitor (DTI) channel reaction time (R). Results of clotting time (CT) and reaction time (R) within the normal range do not reliable exclude relevant residual DOAC plasma levels limiting the clinical utility of viscoelastic assays in this context.
Conclusion: Viscoelastic test assays can provide fast and essential point-of-care information regarding DOAC activity, especially DOAC specific assays. The identification and quantification of residual DOAC plasma concentration with DOAC unspecific viscoelastic assays are not sensitive enough, compared to recommended anti-Xa activity laboratory measurements.
Systematic review registration: [https://www.crd.york.ac.uk/prospero/display_record.php?RecordID=320629], identifier [CRD42022320629].
Keywords: ClotPro; DOAC; FII inhibitor; FXa inhibitor; ROTEM; TEG; point-of-car
Compressive Strength Tests and Design of Cold-formed Plain and Dimpled Steel Columns
This paper presents the experiments and design formulae of cold-formed plain and dimpled steel columns. A series of compression tests on plain and dimpled channel columns were conducted over a range of different geometries and the strength of the columns were investigated. The change in strength of the dimpled columns resulting from the cold working associated with the dimpling process was considered. The results showed that the buckling and ultimate strengths of dimpled steel columns were up to 33% and 26% greater than plain steel columns, respectively. The test results were evaluated by comparing buckling and ultimate loads of plain and dimpled channel columns with the values predicted by theoretical and semi-empirical methods. It was found that the predicted buckling and ultimate loads correlated well with the experimental results. Based on the experimental results, expressions for determining buckling and ultimate strengths of component plate elements of plain and dimpled channel columns were formulated
DNA bending facilitates the error-free DNA damage tolerance pathway and upholds genome integrity
Abstract DNA replication is sensitive to damage in the template. To bypass lesions and complete replication, cells activate recombination-mediated (error-free) and translesion synthesis-mediated (error-prone) DNA damage tolerance pathways. Crucial for error-free DNA damage tolerance is template switching, which depends on the formation and resolution of damage-bypass intermediates consisting of sister chromatid junctions. Here we show that a chromatin architectural pathway involving the high mobility group box protein Hmo1 channels replication-associated lesions into the error-free DNA damage tolerance pathway mediated by Rad5 and PCNA polyubiquitylation, while preventing mutagenic bypass and toxic recombination. In the process of template switching, Hmo1 also promotes sister chromatid junction formation predominantly during replication. Its C-terminal tail, implicated in chromatin bending, facilitates the formation of catenations/hemicatenations and mediates the roles of Hmo1 in DNA damage tolerance pathway choice and sister chromatid junction formation. Together, the results suggest that replication-associated topological changes involving the molecular DNA bender, Hmo1, set the stage for dedicated repair reactions that limit errors during replication and impact on genome stability
Computed micro-tomographic evaluation of glide pathwith nickel-titanium rotary pathFile in maxillary firstmolars curved canals
Introduction: X-ray computed micro-tomography scanning allows high-resolution 3-dimensional imaging of small objects. In this study, micro-CT scanning was used to compare the ability of manual and mechanical glide path to maintain the original root canal anatomy. Methods: Eight extracted upper first permanent molars were scanned at the TOMOLAB station at ELETTRA Synchrotron Light Laboratory in Trieste, Italy, with a microfocus cone-beam geometry system. A total of 2,400 projections on 360 degrees have been acquired at 100 kV and 80 mu A, with a focal spot size of 8 mu m. Buccal root canals of each specimen (n = 16) were randomly assigned to Path File (P) or stainless-steel K-file (K) to perform glide path at the full working length. Specimens were then microscanned at the apical level (A) and at the point of the maximum curvature level (C) for post-treatment analyses. Curvatures of root canals were classified as moderate (= 40 degrees). The ratio of diameter ratios (RDRs) and the ratio of cross-sectional areas (RAs) were assessed. For each level of analysis (A and C), 2 balanced 2-way factorial analyses of variance (P < .05) were performed to evaluate the significance of the instrument factor and of canal curvature factor as well as the interactions of the factors both with RDRs and RAs. Results: Specimens in the K group had a mean curvature of 35.4 degrees +/- 11.5 degrees; those in the P group had a curvature of 38 degrees +/- 9.9 degrees. The instrument factor (P and K) was extremely significant (P < .001) for both the RDR and RA parameters, regardless of the point of analysis. Conclusions: Micro-CT scanning confirmed that NiTi rotary Path File instruments preserve the original canal anatomy and cause less canal aberrations. (J Endod 2012;38:389-393
Study Projectile Motion With Different Initial Conditions Using Digital Image
The aim of this research is building algorithms to study projectile motion in tow dimension and tracking the object in sequence frames of digital image . Computer program has written in visual basic language (version 6) depend on mathematical models to detect a motion of object in twoâdimensions (2-D)with different initial conditions like initial velocity, the height of object from the earth and the angle of motion, to calculate important variables in motion such as distance, displacement, velocity, speed and the energy (kinetic and potential). Color digital images of type (bmp) and (RGB) color model were used in the study for easy handling them, after determining the center of the image on the x-axis, and y-axis and tracking movement on the basis of the center, and the results were expected to conform to the movement of the body. Key words: Projectile, Motion, Digital Image
- âŠ