A simple method for J-R curve determination in ABS polymers

Abstract The objective of this paper is to investigate the applicability of a very simple new method, based on load separation criterion, developed for evaluating J-R curves in steels, when applied to ABS polymers. This technique proposes the testing of a single precracked specimen and a single blunt notched specimen. The latter provides a method to detect the plastic displacement range during crack tip blunting in which the assumption of load separation criterion in the precracked specimen is valid, and also allows determination of J IC independently of J-R curve determination. The deformation material function is assumed to be a Ramberg-Osgood type law deformation function which leads to a very easy procedure to determine J-R curves. The J-R curve resulting from this new method is compared with one resulting from a traditional multiple specimen J-R curve determination method. Both results are in good agreement

Typical and atypical pulmonary carcinoids: our institutional experience

Pulmonary carcinoids are rare malignant neoplasms, accounting for 2-5% of all lung tumors, with an approximate annual incidence of 2.3-2.8 cases per million of the population. We relate our experience of 54 patients (21 male, 33 female, mean age 53+/-15 years) treated between July 1986 and April 2006. All the patients underwent preoperative fibrobronchoscopy: preoperative diagnosis was made in 28 patients (52%). Surgical treatment consisted of: 31 standard lobectomies, 6 pneumonectomies, 5 bilobectomies, 2 sleeve lobectomies, 2 anatomic segmentectomies, 6 wedge resections; two patients were managed with sleeve bronchial procedure of the left main bronchus without lung resection. Fifty-four patients were followed with a mean time of observation of 67 months: 6 (11%) deaths occurred, at a mean period of 49 months after surgery; there were no postoperative deaths. Overall, 5-year survival was 91%, 10 years 83%: 5-year survival was 91% for typical carcoinoids (TC) vs. 88% for atypical (AC), 10 years 91% for TC and 44% for AC (significant value, P=0.0487). Carcinoid tumors are a distinct group of neuroendocrine tumors with a good prognosis in most cases. Surgery currently represents the best treatment with good results at mid- and long-term survival, according to an acceptable risk

Prevalence of H63D, S65C and C282Y hereditary hemochromatosis gene mutations in Slovenian population by an improved high-throughput genotyping assay

<p>Abstract</p> <p>Background</p> <p>Hereditary hemochromatosis (HH) is a common genetic disease characterized by excessive iron overload that leads to multi-organ failure. Although the most prevalent genotype in HH is homozygosity for C282Y mutation of the <it>HFE </it>gene, two additional mutations, H63D and S65C, appear to be associated with a milder form of HH. The aim of this study was to develop a high-throughput assay for <it>HFE </it>mutations screening based on TaqMan technology and to determine the frequencies of <it>HFE </it>mutations in the Slovenian population.</p> <p>Methods</p> <p>Altogether, 1282 randomly selected blood donors from different Slovenian regions and 21 HH patients were analyzed for the presence of <it>HFE </it>mutations by an in-house developed real-time PCR assay based on TaqMan technology using shorter non-interfering fluorescent single nucleotide polymorphism (SNP)-specific MGB probes. The assay was validated by RFLP analysis and DNA sequencing.</p> <p>Results</p> <p>The genotyping assay of the H63D, S65C and C282Y mutations in the <it>HFE </it>gene, based on TaqMan technology proved to be fast, reliable, with a high-throughput capability and 100% concordant with genotypes obtained by RFLP and DNA sequencing. The observed frequency of C282Y homozygotes in the group of HH patients was only 48%, others were of the heterogeneous <it>HFE </it>genotype. Among 1282 blood donors tested, the observed H63D, S65C and C282Y allele frequency were 12.8% (95% confidence interval (CI) 11.5 – 14.2%), 1.8% (95% CI 1.4 – 2.5%) and 3.6% (95% CI 3.0 – 4.5%), respectively. Approximately 33% of the tested subjects had at least one of the three HH mutations, and 1% of them were C282Y homozygotes or compound heterozygotes C282Y/H63D or C282Y/S65C, presenting an increased risk for iron overload disease. A significant variation in H63D allele frequency was observed for one of the Slovenian regions.</p> <p>Conclusion</p> <p>The improved real-time PCR assay for H63D, S65C and C282Y mutations detection is accurate, fast, cost-efficient and ready for routine screening and diagnostic procedures. The genotype frequencies in the Slovenian population agree with those reported for the Central European populations although some deviations where observed in comparison with other populations of Slavic origin. Regional distribution of the mutations should be considered when planning population screening.</p

LPS levels in root canals after the use of ozone gas and high frequency electrical pulses

Abstract The present study aims to verify the effect of ozone gas (OZY® System) and high frequency electric pulse (Endox® System) systems on human root canals previously contaminated with Escherichia colilipopolysaccharide (LPS). Fifty single-rooted teeth had their dental crowns removed and root lengths standardized to 16 mm. The root canals were prepared up to #60 hand K-files and sterilized using gamma radiation with cobalt 60. The specimens were divided into the following five groups (n = 10) based on the disinfection protocol used: OZY® System, one 120-second-pulse (OZY 1p); OZY® System, four 24-second-pulses (OZY 4p); and Endox® System (ENDOX). Contaminated and non-contaminated canals were exposed only to apyrogenic water and used as positive (C+) and negative (C-) controls, respectively. LPS (O55:B55) was administered in all root canals except those belonging to group C-. After performing disinfection, LPS samples were collected from the canals using apyrogenic paper tips. Limulus Amoebocyte Lysate (LAL) was used to quantify the LPS levels, and the data obtained was analyzed using one-way ANOVA. The disinfection protocols used were unable to reduce the LPS levels significantly (p = 0.019). The use of ozone gas and high frequency electric pulses was not effective in eliminating LPS from the root canals

CHIME/FRB Detection of Eight New Repeating Fast Radio Burst Sources

We report on the discovery of eight repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Mapping Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 103.5 to 1281 pc cm$^{-3}$. They display varying degrees of activity: six sources were detected twice, another three times, and one ten times. These eight repeating FRBs likely represent the bright and/or high-rate end of a distribution of infrequently repeating sources. For all sources, we determine sky coordinates with uncertainties of $\sim$10$^\prime$. FRB 180916.J0158+65 has a burst-averaged DM = $349.2 \pm 0.3$ pc cm$^{-3}$ and a low DM excess over the modelled Galactic maximum (as low as $\sim$20 pc cm$^{-3}$); this source also has a Faraday rotation measure (RM) of $-114.6 \pm 0.6$ rad m$^{-2}$, much lower than the RM measured for FRB 121102. FRB 181030.J1054+73 has the lowest DM for a repeater, $103.5 \pm 0.3$ pc cm$^{-3}$, with a DM excess of $\sim$ 70 pc cm$^{-3}$. Both sources are interesting targets for multi-wavelength follow-up due to their apparent proximity. The DM distribution of our repeater sample is statistically indistinguishable from that of the first 12 CHIME/FRB sources that have not repeated. We find, with 4$\sigma$ significance, that repeater bursts are generally wider than those of CHIME/FRB bursts that have not repeated, suggesting different emission mechanisms. Our repeater events show complex morphologies that are reminiscent of the first two discovered repeating FRBs. The repetitive behavior of these sources will enable interferometric localizations and subsequent host galaxy identifications.Comment: 40 pages, 11 figures; accepted by ApJL on 28 September 2019; added analysis of correlation between width and max. flux densit