Aphid feeding induces phytohormonal cross-talk without affecting silicon defense against subsequent chewing herbivores

Prior feeding by insect herbivores frequently affects plant quality for herbivores that subsequently feed on the plant. Facilitation occurs when one herbivore improves plant quality for other herbivores, including when the former compromises plant defenses. Silicon (Si) is an important defense in grasses that increases following activation of the jasmonic acid (JA) pathway. Given that aphids often stimulate the salicylic acid (SA) pathway, we hypothesized that this could reduce Si defense because of the well documented antagonistic cross-talk between SA and JA. We tested this in the model grass Brachypodium distachyon with and without Si (+Si and −Si, respectively); half of the plants were exposed to aphids (Rhopalosiphum padi) and half remained aphid-free. Aphid-free and aphid-exposed plants were then fed to chewing herbivores (Helicoverpa armigera). Aphids triggered higher SA concentrations which suppressed JA concentrations but this did not affect foliar Si. Chewing herbivores triggered higher JA concentrations and induced Si uptake, regardless of previous feeding by aphids. Chewer growth rates were not impacted by prior aphid herbivory but were reduced by 75% when feeding on +Si plants. We concluded that aphids caused phytohormonal cross-talk but this was overridden by chewing herbivory that also induced Si uptake

Increased insect herbivore performance under elevated CO2 is associated with lower plant defence signalling and minimal declines in nutritional quality

Changes in insect herbivore performance under elevated atmosphere carbon dioxide concentrations e[CO2] are often driven by changes in the nutritional and defensive chemistry of their host plants. Studies addressing how the prolific pest cotton bollworm (Helicoverpa armigera) responds to e[CO2] show that performance usually declines, often associated with lower nutritional (e.g. nitrogen (N) concentrations) quality of host plants under e[CO2]. We investigated the impacts of e[CO2] on nutritional quality and anti-herbivore (jasmonate) defensive signalling in lucerne (Medicago sativa) when challenged by H. armigera. While foliar N decreased under e[CO2], other aspects of nutritional quality (soluble protein, amino acids, foliar C:N) were largely unaffected, potentially due to increased root nodulation under e[CO2]. In contrast, e[CO2] greatly reduced jasmonate signalling in M. sativa following H. armigera attack; jasmonic acid concentrations were ca. 56% lower in attacked plants grown under e[CO2]. Concurrent with this, relative growth rates of H. armigera were ca. 66% higher when feeding on e[CO2]-grown plants. In contrast with previous reports, which we meta-analytically summarise, we provide the first evidence that H. armigera performance can increase under e[CO2]. This may occur in plants, such as M. sativa, where e[CO2] has limited impacts on nutritional quality yet reduces jasmonate defence signalling. Note: An Author Correction to this article was published on 07 December 2020. The PDF available here includes the correction appended to the original

Silicon alters leaf surface morphology and suppresses insect herbivory in a model grass species

Grasses accumulate large amounts of silicon (Si) which is deposited in trichomes, specialised silica cells and cell walls. This may increase leaf toughness and reduce cell rupture, palatability and digestion. Few studies have measured leaf mechanical traits in response to Si, thus the effect of Si on herbivores can be difficult to disentangle from Si-induced changes in leaf surface morphology. We assessed the effects of Si on Brachypodium distachyon mechanical traits (specific leaf area (SLA), thickness, leaf dry matter content (LDMC), relative electrolyte leakage (REL)) and leaf surface morphology (macrohairs, prickle, silica and epidermal cells) and determined the effects of Si on the growth of two generalist insect herbivores (Helicoverpa armigera and Acheta domesticus). Si had no effect on leaf mechanical traits; however, Si changed leaf surface morphology: silica and prickle cells were on average 127% and 36% larger in Si supplemented plants, respectively. Prickle cell density was significantly reduced by Si, while macrohair density remained unchanged. Caterpillars were more negatively affected by Si compared to crickets, possibly due to the latter having a thicker and thus more protective gut lining. Our data show that Si acts as a direct defence against leaf-chewing insects by changing the morphology of specialised defence structures without altering leaf mechanical traits

Ohio Economic Insects and Related Anthropods

PDF pages: 3

A hygrothermal modelling approach to water vapour sorption isotherm design for mesoporous humidity buffers

This paper describes the development of a design technique using hygrothermal numerical modelling for top-down predictive design and optimisation of water vapour sorption isotherms to match any humidity buffering application. This was used to inform the design and synthesis of two new mesoporous silica (MS) materials suitable for specific applications. To validate the technique, the new materials were experimentally assessed using gravimetric dynamic vapour sorption (DVS). The experimental isotherms closely matched the optimised isotherm predictions from the design stage, and a positive correlation was observed between the rate of change in adsorbed water content, Δw and the time taken to exceed the permissible upper limit of humidity, φi,U in a closed environment. A positive non-linear correlation was determined between the interior volumetric moisture load, ωml and the mass of adsorbent required to fully achieve humidity buffering between specified lower/ upper limits (φi,L and φi,U). The kinetics of water vapour sorption/ desorption were found to have general agreement when using the current hygrothermal numerical model. Current hygrothermal models appear to significantly underestimate the rate of adsorption/ desorption in rapid-response mesoporous silica type materials. This is perhaps largely due to the current lack of consideration for scanning curve prediction within hysteresis loops and so is a priority for future research

Climatic drivers of silicon accumulation in a model grass operate in low- but not high-silicon soils

Grasses are hyper-accumulators of silicon (Si), which is known to alleviate diverse environmental stresses, prompting speculation that Si accumulation evolved in response to unfavourable climatic conditions, including seasonally arid environments. We conducted a common garden experiment using 57 accessions of the model grass Brachypodium distachyon, sourced from different Mediterranean locations, to test relationships between Si accumulation and 19 bioclimatic variables. Plants were grown in soil with either low or high (Si supplemented) levels of bioavailable Si. Si accumulation was negatively correlated with temperature variables (annual mean diurnal temperature range, temperature seasonality, annual temperature range) and precipitation seasonality. Si accumulation was positively correlated with precipitation variables (annual precipitation, precipitation of the driest month and quarter, and precipitation of the warmest quarter). These relationships, however, were only observed in low-Si soils and not in Si-supplemented soils. Our hypothesis that accessions of B. distachyon from seasonally arid conditions have higher Si accumulation was not supported. On the contrary, higher temperatures and lower precipitation regimes were associated with lower Si accumulation. These relationships were decoupled in high-Si soils. These exploratory results suggest that geographical origin and prevailing climatic conditions may play a role in predicting patterns of Si accumulation in grasses

Investigating the feasibility of using asphalt pavements as a source of heating

This paper evaluates the feasibility of using asphalt pavements as solar energy collectors with copper pipes embedded below the surfaces. Quartzite was investigated as a replacement for limestone aggregate in asphalt for thermal enhancement. Samples of both asphalt types were tested for indirect stiffness modulus, indirect fatigue, permanent deformation and thermal conductivity. The pipe networks system was also tested. The results indicate that limestone has a better performance in load bearing capacity except fatigue life but the thermal conductivity of the quartzite mixture is higher. With a greater thermal conductivity in the upper layer, the thermal efficiency of the network can be significantly improved

Conducting a secondary data analysis to estimate the incidence of congenital syphilis in South Africa, 2010–2016

Analysis of existing health data is often used as a cost-effective and time-efficient means to provide evidence to inform important public health decisions. However, the accuracy of the resultant decisions largely depends on the quality of the accessible data, and how the data are processed, analyzed, interpreted and reported. This case study, based on an actual secondary data analysis that was conducted by a trainee of the South African Field Epidemiology Training Programme during April 2017, was designed to provide a classroom simulation of practical considerations that should be taken into account when planning an analysis of a secondary dataset. The case study is ideally suited to reinforce principles already covered in lectures or in background reading assignments.http://www.panafrican-med-journal.comam2019School of Health Systems and Public Health (SHSPH

Thermal, mechanical and microstructural analysis of concrete containing microencapsulated phase change materials

This paper studies the thermal, mechanical and microstructural aspects of concrete containing different amounts of microencapsulated phase change materials (PCMs). In addition, numerical simulation is carried out to study the potential application of PCM-modified concrete for reduction in summer surface temperature. It is shown that increasing PCM content in concrete led to lower thermal conductivity and an increase in the heat storage ability of concrete. However, the compressive and flexural strength of concrete significantly decreased. Microstructural analysis showed that PCMs appear to remain intact during mixing; however, PCM particles appear to fail by bursting under loading, creating hemispherical voids and crack initiation points as well as possible entrapped air behaviour. The result of numerical simulation revealed that reduction in summer concrete pavement surface temperature by several degrees was possible, with implications for reduction in concrete thermal stresses, shrinkage and urban heat island effect

Development of the X-ray camera for the OGRE sub-orbital rocket

Current theories regarding the matter composition of the universe suggest that half of the expected baryonic matter is missing. One region this could be residing in is intergalactic filaments which absorb strongly in the X-ray regime. Present space based technology is limited when it comes to imaging at these wavelengths and so new techniques are required. The Off-Plane Grating Rocket Experiment (OGRE) aims to produce the highest resolution spectrum of the binary star system Capella, a well-known X-ray source, in the soft X-ray range (0.2keV to 2keV). This will be achieved using a specialised payload combining three low technology readiness level components placed on-board a sub-orbital rocket. These three components consist of an array of large format off-plane X-ray diffraction gratings, a Wolter Type 1 mirror made using single crystal silicon, and the use of EM-CCDs to capture soft X-rays. Each of these components have been previously reviewed with OGRE being the first project to utilise them in a space observation mission. This paper focuses on the EM-CCDs (CCD207-40 by e2v) that will be used and their optimisation with a camera purposely designed for OGRE. Electron Multiplying gain curves were produced for the back-illuminated devices at -80 degrees Celsius. Further tests which will need to be carried out are discussed and the impact of the OGRE mission on future projects mentioned