Specification guidelines for hybrid microcircuits

Guidelines establishing manufacturing and control procedures for hybrid microcircuits used in aerospace programs may have possible commercial and industrial applications. Guidelines encompass parts, materials, and process controls, as well as assembly, packaging methods, screening, and inspection procedures for procurement of custom packaged, high reliability microcircuits

Investigation of discrete component chip mounting technology for hybrid microelectronic circuits

The use of polymer adhesives for high reliability microcircuit applications is a radical deviation from past practices in electronic packaging. Bonding studies were performed using two gold-filled conductive adhesives, 10/90 tin/lead solder and Indalloy no. 7 solder. Various types of discrete components were mounted on ceramic substrates using both thick-film and thin-film metallization. Electrical and mechanical testing were performed on the samples before and after environmental exposure to MIL-STD-883 screening tests

Development of a container for handling, testing, and storing discrete microelectronic components

A container has been developed for handling, testing, burning-in, and storing discrete microelectronic components without removal from the protective package. The package was designed to accommodate the leadless inverted device and other carrier-mounted active devices and chip-type discrete resistors and capacitors. Before the indicated development, components were handled and tested in various ways, some of which resulted in damage or contamination. The basic design of the container utilizes precision machined printed circuit boards and chemically milled (photoetched) contact springs. Included in this design for protection is an O-ring-sealed cover. Methods of fabrication and limitations of the current hardware are presented. Current applications of and possible extensions to the technology are discussed

Proceedings of the 1977 NASA/ISHM Microelectronics Conference

Current and future requirements for research, development, manufacturing and education in the field of hybrid microelectronic technology were discussed

Analysis of debris from Spacelab Space Life Sciences-1

Airborne microbiological and particulate contamination generated aboard Spacelab modules is a potential safety hazard. In order to shed light on the characteristics of these contaminants, microbial and chemical/particulate analyses were performed on debris vacuumed from cabin and avionics air filters in the Space Life Sciences-1 (SLS-1) module of the Space Transportation System 40 (STS-40) mission 1 month after landing. The debris was sorted into categories (e.g., metal, nonmetal, hair/fur, synthetic fibers, food particles, insect fragments, etc.). Elemental analysis of particles was done by energy dispersive analysis of x rays (metals) and Fourier transform infrared spectroscopy (nonmetals). Scanning electron micrographs were done of most particles. Microbiological samples were grown on R2A culture medium and identified. Clothing fibers dominated the debris by volume. Other particles, all attributed to the crew, resulted from abrasions and impacts during missions operations (e.g., paint chips, plastic, electronic scraps and clothing fibers). All bacterial species identified are commonly found in the atmosphere or on the human body. Bacillus sp. was the most frequently seen bacterium. One of the bacterial species, Enterobacter agglomerans, could cause illness in crew members with depressed immune systems

Design guidelines for use of adhesives and organic coatings in hybrid microcircuits

A study was conducted to investigate the reliability of organic adhesives in hybrid microcircuits. The objectives were twofold: (1) to identify and investigate problem areas that could result from the use of organic adhesives and (2) to develop evaluation tests to quantify the extent to which these problems occur for commercially available adhesives. Efforts were focused on electrically conductive adhesives. Also, a study was made to evaluate selected organic coatings for contamination protection for hybrid microcircuits

Generalized minimal output entropy conjecture for one-mode Gaussian channels: definitions and some exact results

A formulation of the generalized minimal output entropy conjecture for Gaussian channels is presented. It asserts that, for states with fixed input entropy, the minimal value of the output entropy of the channel (i.e. the minimal output entropy increment for fixed input entropy) is achieved by Gaussian states. In the case of centered channels (i.e. channels which do not add squeezing to the input state) this implies that the minimum is obtained by thermal (Gibbs) inputs. The conjecture is proved to be valid in some special cases.Comment: 7 pages, updated version minor typos correcte

Coherent open-loop optimal control of light-harvesting dynamics

We apply theoretically open-loop quantum optimal control techniques to provide methods for the verification of various quantum coherent transport mechanisms in natural and artificial light-harvesting complexes under realistic experimental constraints. We demonstrate that optimally shaped laser pulses allow to faithfully prepare the photosystem in specified initial states (such as localized excitation or coherent superposition, i.e. propagating and non-propagating states) and to probe efficiently the dynamics. These results provide a path towards the discrimination of the different transport pathways and to the characterization of environmental properties, enhancing our understanding of the role that coherent processes may play in biological complexes.Comment: 12 pages, 15 figure

Deep-water sedimentation processes on a glaciated margin: The Foula Wedge trough mouth fan, West of Shetland

Trough Mouth Fans (TMF) are sedimentary depocenters located at glaciated continental margins and consist predominantly of glacigenic debris flow deposits. The Foula wedge is a Pleistocene TMF accumulated offshore West of Shetland over the Northeast Atlantic margin. This study presents an analysis of a 3D seismic reflection dataset imaging the distal Foula wedge basin fan deposits between 1010 and 1100 m water depth, directly downslope from a gully system which was active untill the end of the last deglaciation. Results reveal, in unprecedented detail, the basal surface of this fan system and its internal complex architecture. Features typical of both debris flow deposits and turbidites are identified, including a basin channel network with linear and diverging erosional features forming distinctive terminal lobes, stacked and backstepping. The study links the seafloor morphology of the basin fan with its subsurface geomorphology, showing connection with the downslope gully system to the east. It presents evidence for a complex distal depositional system on glaciated margins, characterised by heterogeneous sediment delivery processes and deposits. A conceptual evolution model is proposed, with a glacigenic debris flow-dominated TMF at the LGM, subsequently influenced by meltwater discharges, with deposition occurring as a function of the shelf margin and slope paleo-morphology, slope substrate composition, interaction of downslope and along slope processes and ice-margin dynamics

Magnetic resonance tumor regression grade (MR-TRG) to assess pathological complete response following neoadjuvant radiochemotherapy in locally advanced rectal cancer

This study aims to evaluate the feasibility of a magnetic resonance (MR) automatic method for quantitative assessment of the percentage of fibrosis developed within locally advanced rectal cancers (LARC) after neoadjuvant radiochemotherapy (RCT). A total of 65 patients were enrolled in the study and MR studies were performed on 3.0 Tesla scanner; patients were followed-up for 30 months. The percentage of fibrosis was quantified on T2-weighted images, using automatic K-Means clustering algorithm. According to the percentage of fibrosis, an optimal cut-off point for separating patients into favorable and unfavorable pathologic response groups was identified by ROC analysis and tumor regression grade (MR-TRG) classes were determined and compared to histopathologic TRG. An optimal cut-off point of 81% of fibrosis was identified to differentiate between favorable and unfavorable pathologic response groups resulting in a sensitivity of 78.26% and a specificity of 97.62% for the identification of complete responders (CRs). Interobserver agreement was good (0.85). The agreement between P-TRG and MR-TRG was excellent (0.923). Significant differences in terms of overall survival (OS) and disease free survival (DFS) were found between favorable and unfavorable pathologic response groups. The automatic quantification of fibrosis determined by MR is feasible and reproducible