113 research outputs found
Significant factors of the successful lean six-sigma implementation
© 2017 International Journal of Mathematical, Engineering and Management Sciences. Based on an extensive literature review we have selected factors critical for Lean Six Sigma implementation success. Four variables were selected to be used as output variables measuring this project success: project on time completion, achievement of financial goals, sigma level achieved (that was measured using Defects per Million Opportunities, DPMO), and overall project success. Using empirical data from 256 Lean Six Sigma Projects, we present the model developed and identify significant factors for Lean Six Sigma implementation success. Empirical results, which were collected during Lean Six Sigma implementation in 39 business units of an Automotive Sector Company in North America and Europe, were analysed using Multivariate Analysis of Variance (MANOVA) and General Linear Model (GLM). Two main factors were found as positively linked with the different aspects of project success: the competency of the Black Belts team and the management support to the project
Propylthiouracil-Induced Acute Liver Failure: Role of Liver Transplantation
Propylthiouracil- (PTU-) induced hepatotoxicity is rare but potentially lethal with a spectrum of liver injury ranging from asymptomatic elevation of transaminases to fulminant hepatic failure and death. We describe two cases of acute hepatic failure due to PTU that required liver transplantation. Differences in the clinical presentation, histological characteristics, and posttransplant management are described as well as alternative therapeutic options. Frequent monitoring for PTU-induced hepatic dysfunction is strongly advised because timely discontinuation of this drug and implementation of noninvasive therapeutic interventions may prevent progression to liver failure or even death
Ciencias de la Biología y Agronomía
Este volumen I contiene 17 capítulos arbitrados que se ocupan de estos asuntos en Tópicos Selectos de Ciencias de la Biología y Agronomía, elegidos de entre las contribuciones, reunimos algunos investigadores y estudiantes. Se presenta un Estudio Comparativo de los Recursos Hidrológico-Forestales de la Microcuenca de la Laguna de Epatlan, Pue. (1993 a 2014); la Situación Actual de la Mancha de Asfalto en Maíz (Zea mays L.) en los Municipios de Jiquipilas y Ocozocoautla, Chiapas, México; las poblaciones sobresalientes de maíz de la raza Zapalote Chico, en la Región Istmeña de Oaxaca; Se indica el índice de área foliar de cultivo de Chile Poblano mediante dos métodos en condiciones protegidas; Esquivel, Urzúa y Ramírez exploran el efecto de la biofertilización con Azospirillum en el crecimiento y producción de Jitomate; esbozan su artículo sobre la determinación del nivel de Heterosis en híbridos de Maíz para la Comarca Lagunera; una investigación sobre la estabilización de semilla de Solanum lycopersicum durante el almacenamiento y estimulación de la germinación; acotan sobre el CTAB como una nueva opción para la detección de Huanglongbing en cítricos, plantean su evaluación sobre el aluminio y cómo afecta la vida de florero de Heliconia psittacorum; indican sobre el impacto del H-564C, como un híbrido de maíz con alta calidad de proteina para el trópico húmedo de México; presetan su investigación sobre la producción de Piña Cayena Lisa y MD2 (Ananas comosus L.) en condiciones de Loma Bonita, en Oaxaca; acotan sobre el efecto de coberteras como control biológico por conservación contra áfidos en Nogal Pecanero; esbozan sobre la caracterización de cuatro genotipos de Frijol Negro en Martínez de la Torre, Veracruz, México; presentan una caracterización hidroecológica de la microcuenca de Arroyo Prieto, Yuriría, Gto., y alternativas para su restauración ambiental; presentan su investigación sobre el efecto del hongo Beauveria bassiana sobre solubilización de fosfatos y la disponibilidad de fósforo en el suelo; plantean su investigación sobre la Germinación y regeneración in vitro de Epidendrum falcatum LINDL; esbozan su artículo sobre genotipos de frijol negro y su tolerancia a sequía terminal en Veracruz, México
A collaboratively derived environmental research agenda for Galapagos
Galápagos is one of the most pristine archipelagos in the world and its conservation relies upon research and sensible management. In recent decades both the interest in, and the needs of, the islands have increased, yet the funds and capacity for necessary research have remained limited. It has become, therefore, increasingly important to identify areas of priority research to assist decision-making in Galápagos conservation.
This study identified 50 questions considered priorities for future research and management. The exercise involved the collaboration of policy makers, practitioners and researchers from more than 30 different organisations. Initially, 360 people were consulted to generate 781 questions. An established process of preworkshop voting and three rounds to reduce and reword the questions, followed by a two-day workshop, was used to produce the final 50 questions. The most common issues raised by this list of questions were human population growth, climate change and the impact of invasive alien species. These results have already been used by a range of organisations and politicians and are expected to provide the basis for future research on the islands so that its sustainability may be enhanced.
</jats:p
Advanced Virgo Plus: Future Perspectives
While completing the commissioning phase to prepare the Virgo interferometer for the next joint Observation Run (O4), the Virgo collaboration is also finalizing the design of the next upgrades to the detector to be employed in the following Observation Run (O5). The major upgrade will concern decreasing the thermal noise limit, which will imply using very large test masses and increased laser beam size. But this will not be the only upgrade to be implemented in the break between the O4 and O5 observation runs to increase the Virgo detector strain sensitivity. The paper will cover the challenges linked to this upgrade and implications on the detector's reach and observational potential, reflecting the talk given at 12th Cosmic Ray International Seminar - CRIS 2022 held in September 2022 in Napoli
The Advanced Virgo+ status
The gravitational wave detector Advanced Virgo+ is currently in the commissioning phase in view of the fourth Observing Run (O4). The major upgrades with respect to the Advanced Virgo configuration are the implementation of an additional recycling cavity, the Signal Recycling cavity (SRC), at the output of the interferometer to broaden the sensitivity band and the Frequency Dependent Squeezing (FDS) to reduce quantum noise at all frequencies. The main difference of the Advanced Virgo + detector with respect to the LIGO detectors is the presence of marginally stable recycling cavities, with respect to the stable recycling cavities present in the LIGO detectors, which increases the difficulties in controlling the interferometer in presence of defects (both thermal and cold defects). This work will focus on the interferometer commissioning, highlighting the control challenges to maintain the detector in the working point which maximizes the sensitivity and the duty cycle for scientific data taking
Frequency-Dependent Squeezed Vacuum Source for the Advanced Virgo Gravitational-Wave Detector
In this Letter, we present the design and performance of the frequency-dependent squeezed vacuum source that will be used for the broadband quantum noise reduction of the Advanced Virgo Plus gravitational-wave detector in the upcoming observation run. The frequency-dependent squeezed field is generated by a phase rotation of a frequency-independent squeezed state through a 285 m long, high-finesse, near-detuned optical resonator. With about 8.5 dB of generated squeezing, up to 5.6 dB of quantum noise suppression has been measured at high frequency while close to the filter cavity resonance frequency, the intracavity losses limit this value to about 2 dB. Frequency-dependent squeezing is produced with a rotation frequency stability of about 6 Hz rms, which is maintained over the long term. The achieved results fulfill the frequency dependent squeezed vacuum source requirements for Advanced Virgo Plus. With the current squeezing source, considering also the estimated squeezing degradation induced by the interferometer, we expect a reduction of the quantum shot noise and radiation pressure noise of up to 4.5 dB and 2 dB, respectively
- …