Space Station Freedom environmental control and life support system phase 3 simplified integrated test detailed report

A description of the phase 3 simplified integrated test (SIT) conducted at the Marshall Space Flight Center (MSFC) Core Module Integration Facility (CMIF) in 1989 is presented. This was the first test in the phase 3 series integrated environmental control and life support systems (ECLSS) tests. The basic goal of the SIT was to achieve full integration of the baseline air revitalization (AR) subsystems for Space Station Freedom. Included is a description of the SIT configuration, a performance analysis of each subsystem, results from air and water sampling, and a discussion of lessons learned from the test. Also included is a full description of the preprototype ECLSS hardware used in the test

Quench Crucibles Reinforced with Metal

Improved crucibles consisting mainly of metal-reinforced ceramic ampules have been developed for use in experiments in which material specimens are heated in the crucibles to various high temperatures, then quenched by, for example, plunging the crucibles into water at room temperature. In a traditional quench crucible, the gap between the ampule and the metal cartridge impedes the transfer of heat to such a degree that the quench rate (the rate of cooling of the specimen) can be too low to produce the desired effect in the specimen. One can increase the quench rate by eliminating the metal cartridge to enable direct quenching of the ampule, but then the thermal shock of direct quenching causes cracking of the ampule. In a quench crucible of the present improved type, there is no gap and no metal cartridge in the traditional sense. Instead, there is an overlay of metal in direct contact with the ampule, as shown on the right side of the figure. Because there is no gap between the metal overlay and the ampule, the heat-transfer rate can be much greater than it is in a traditional quench crucible. The metal overlay also reinforces the ampule against cracking

Sex and Racial/Ethnic Differences in Cardiovascular Disease Risk Factor Treatment and Control Among Individuals With Diabetes in the Multi-Ethnic Study of Atherosclerosis (MESA)

OBJECTIVE To examine sex and racial/ethnic differences in cardiovascular risk factor treatment and control among individuals with diabetes in the Multi-Ethnic Study of Atherosclerosis (MESA). RESEARCH DESIGN AND METHODS This study was an observational study examining mean levels of cardiovascular risk factors and proportion of subjects achieving treatment goals. RESULTS The sample included 926 individuals with diabetes. Compared with men, women were 9% less likely to achieve LDL cholesterol <130 mg/dl (adjusted prevalence ratio 0.91 [0.83-0.99]) and systolic blood pressure (SBP) <130 mmHg (adjusted prevalence ratio 0.91 [0.85-0.98]). These differences diminished over time. A lower percentage of women used aspirin (23 vs. 33%; P < 0.001). African American and Hispanic women had higher mean levels of SBP and lower prevalence of aspirin use than non-Hispanic white women. CONCLUSIONS Women with diabetes had unfavorable cardiovascular risk factor profiles compared with men. African American and Hispanic women had less favorable profiles than non-Hispanic white women

The sodium channel accessory subunit Navβ1 regulates neuronal excitability through modulation of repolarizing voltage-gated K+ channels

The channel pore-forming α subunit Kv4.2 is a major constituent of A-type (I(A)) potassium currents and a key regulator of neuronal membrane excitability. Multiple mechanisms regulate the properties, subcellular targeting and cell surface expression of Kv4.2-encoded channels. In the present study, shotgun proteomic analyses of immunoprecipitated mouse brain Kv4.2 channel complexes unexpectedly identified the voltage-gated Na(+) channel accessory subunit Navβ1. Voltage-clamp and current-clamp recordings revealed that knockdown of Navβ1 decreases I(A) densities in isolated cortical neurons and that action potential waveforms are prolonged and repetitive firing is increased in Scn1b null cortical pyramidal neurons lacking Navβ1. Biochemical and voltage-clamp experiments further demonstrated that Navβ1 interacts with and increases the stability of heterologously expressed Kv4.2 protein, resulting in greater total and cell surface Kv4.2 protein expression and in larger Kv4.2-encoded current densities. Taken together, the results presented here identify Navβ1 as a component of native neuronal Kv4.2-encoded I(A) channel complexes and a novel regulator of I(A) channel densities and neuronal excitability

HOx and NOx production in oxidation flow reactors via photolysis of isopropyl nitrite, isopropyl nitrite-d(7), and 1,3-propyl dinitrite at lambda=254, 350, and 369 nm

Oxidation flow reactors (OFRs) are an emerging technique for studying the formation and oxidative aging of organic aerosols and other applications. In these flow reactors, hydroxyl radicals (OH), hydroperoxyl radicals (HO2), and nitric oxide (NO) are typically produced in the following ways: photolysis of ozone (O-3) at), = 254 nm, photolysis of H2O at), = 185 nm, and via reactions of O(D-1) with H2O and nitrous oxide (N2O); O(D-1) is formed via photolysis of O-3 at = 254 nm and/or N2O at = 185 nm. Here, we adapt a complementary method that uses alkyl nitrite photolysis as a source of OH via its production of HO2 and NO followed by the reaction NO + HO2 -> NO2 + OH. We present experimental and model characterization of the OH exposure and NO, levels generated via photolysis of C3 alkyl nitrites (isopropyl nitrite, perdeuterated isopropyl nitrite, 1,3-propyl dinitrite) in the Potential Aerosol Mass (PAM) OFR as a function of photolysis wavelength (7, = 254 to 369 nm) and organic nitrite concentration (0.5 to 20 ppm). We also apply this technique in conjunction with chemical ionization mass spectrometer measurements of multifunctional oxidation products generated following the exposure of a-Pinene to HO, and NO, obtained using both isopropyl nitrite and O-3 + H2O + N2O as the radical precursors.Peer reviewe

Online measurements of the emissions of intermediate-volatility and semi-volatile organic compounds from aircraft

A detailed understanding of the climate and air quality impacts of aviation requires measurements of the emissions of intermediate-volatility and semi-volatile organic compounds (I/SVOCs) from aircraft. Currently both the amount and chemical composition of aircraft I/SVOC emissions remain poorly characterized. Here we characterize I/SVOC emissions from aircraft, using a novel instrument for the online, quantitative measurement of the mass loading and composition of low-volatility organic vapors. Emissions from the NASA DC8 aircraft were sampled on the ground 143 m downwind of the engines and characterized as a function of engine power from idle (4% maximum rated thrust) through 85% power. Results show that I/SVOC emissions are highest during engine idle operating conditions, with decreasing but non-zero I/SVOC emissions at higher engine powers. Comparison of I/SVOC emissions with total hydrocarbon (THC) measurements, VOC measurements, and an established emissions profile indicates that I/SVOCs comprise 10–20% of the total organic gas-phase emissions at idle, and an increasing fraction of the total gas-phase organic emissions at higher powers. Positive matrix factorization of online mass spectra is used to identify three distinct types of I/SVOC emissions: aliphatic, aromatic and oxygenated. The volatility and chemical composition of the emissions suggest that unburned fuel is the dominant source of I/SVOCs at idle, while pyrolysis products make up an increasing fraction of the I/SVOCs at higher powers. Oxygenated I/SVOC emissions were detected at lower engine powers (≤30%) and may be linked to cracked, partially oxidized or unburned fuel components.United States. Dept. of Energy. Office of Science (Small Business Innovation Research Program Grant DE-SC0001666)United States. Environmental Protection Agency (National Center for Environmental Research Grant RD834560

Structural Ceramics by Fused Deposition of Ceramics

Fused Deposition of Ceramics (FDC) is a SFF technique, based on FDMTM technology, for fabrication of advanced structural ceramics from powderlbinder filaments. In this study, in-situ reinforced (ISR) Si3N4 powder and polymer/wax based binder systems were used as filament material for FDC processing using a commercially available FDMTM system, 3D Modeler. Powderlbinder feedstocks were mixed using a torque rheometer and filaments were fabricated using a capillary rheometer and twin screw extruder. Green FDC components were built from these filaments and then characterized for inter-road and inter-layer bonding. Binder removal procedures were established for FDC green components to yield brown parts without distortion or shape change. Brown FDC parts were characterized for carbon residue, pore distribution and dimensional changes. Brown FDC parts were then sintered and the sintered density, microstructure, and shrinkage anisotropy were studied.Mechanical Engineerin

Submerged in the mainstream? A case study of an immigrant learner in a New Zealand primary classroom

Immigrant children from diverse language backgrounds face not only linguistic challenges when enrolled in mainstream English-medium classrooms, but also difficulties adjusting to an unfamiliar learning community. The culture of primary school classrooms in New Zealand typically reflects conventions across three dimensions: interactional, instructional task performance and cognitive-academic development. All three dimensions are underpinned by the culturally specific discourse conventions involved in language socialisation. New learners may be helped by classmates or their teacher to understand and successfully use these conventions, but left on their own they may sink rather than swim. This is a case study of one Taiwanese 11-year old boy, 'John', who entered a New Zealand primary classroom midway through the school year. John's basic conversational ability was sound, but he did not possess the interactive classroom skills needed to operate in the new culture of learning. Selected from a wider study of the classroom, transcript data from audio-recorded excerpts of John's interactions over several months with his teacher and classmates are interpreted from perspectives derived from sociocultural and language socialisation theories. The article concludes with a brief consideration of the extent to which John constructed, or was constrained from constructing meaningful learning experiences, and suggestions for further research and reflection

Technical assessment of Mir-1 life support hardware for the international space station

NASA has been progressively learning the design and performance of the Russian life support systems utilized in their Mir space station. In 1992, a plan was implemented to assess the benefits of the Mir-1 life support systems to the Freedom program. Three primary tasks focused on: evaluating the operational Mir-1 support technologies and understanding if specific Russian systems could be directly utilized on the American space station and if Russian technology design information could prove useful in improving the current design of the planned American life support equipment; evaluating the ongoing Russian life support technology development activities to determine areas of potential long-term application to the U.S. space station; and utilizing the expertise of their space station life support systems to evaluate the benefits to the current U.S. space station program which included the integration of the Russian Mir-1 designs with the U.S. designs to support a crew of six