Proof-of-concept trial of the combination of lactitol with Bifidobacterium bifidum and Lactobacillus acidophilus for the eradication of intestinal OXA-48-producing Enterobacteriaceae

Background: The major reservoir of carbapenemase-producing Enterobacteriaceae (CPE) is the gastrointestinal tract of colonized patients. Colonization is silent and may last for months, but the risk of infection by CPE in colonized patients is significant. Methods: Eight long-Term intestinal carriers of OXA-48-producing Enterobacteriaceae (OXA-PE) were treated during 3 weeks with daily oral lactitol (Emportal®), Bifidobacterium bifidum and Lactobacillus acidophilus (Infloran®). Weekly stool samples were collected during the treatment period and 6 weeks later. The presence of OXA-PE was investigated by microbiological cultures and qPCR. Results: At the end of treatment (EoT, secondary endpoint 1), four of the subjects had negative OXA-PE cultures. Three weeks later (secondary endpoint 2), six subjects were negative. Six weeks after the EoT (primary endpoint), three subjects had negative OXA-PE cultures. The relative intestinal load of OXA-PE decreased in all the patients during treatment. Conclusions: The combination of prebiotics and probiotics was well tolerated. A rapid reduction on the OXA-PE intestinal loads was observed. At the EoT, decolonization was achieved in three patients

Microheater Actuators as a Versatile Platform for Strain Engineering in 2D Materials

We present microfabricated thermal actuators to engineer the biaxial strain in two-dimensional (2D) materials. These actuators are based on microheater circuits patterned onto the surface of a polymer with a high thermal expansion coefficient. By running current through the microheater one can vary the temperature of the polymer and induce a controlled biaxial expansion of its surface. This controlled biaxial expansion can be transduced to biaxial strain to 2D materials, placed onto the polymer surface, which in turn induces a shift of the optical spectrum. Our thermal strain actuators can reach a maximum biaxial strain of 0.64%, and they can be modulated at frequencies up to 8 Hz. The compact geometry of these actuators results in a negligible spatial drift of 0.03 μm/°C, which facilitates their integration in optical spectroscopy measurements. We illustrate the potential of this strain engineering platform to fabricate a strain-actuated optical modulator with single-layer MoS2

Staphylococcus aureus nasal colonization in Spanish children. The COSACO nationwide surveillance study

Objective: To assess the prevalence and risk factors for S. aureus and methicillin-resistant S. aureus (MRSA) nasal colonization in Spanish children. Methods: Cross-sectional study of patients <14 years from primary care centers all over Spain. Clinical data and nasal aspirates were collected from March to July 2018. Results: A total of 1876 patients were enrolled. Prevalence of S. aureus and MRSA colonization were 33% (95% CI 30.9–35.1) and 1.44% (95% CI 0.9–2), respectively. Thirtythree percent of the children (633/1876) presented chronic conditions, mainly atopic dermatitis, asthma and/or allergy (524/633). Factors associated with S. aureus colonization were age =5 years (OR 1.10, 95% CI 1.07–1.12), male sex (OR 1.43, 95% CI 1.17–1.76), urban setting (OR 1.46, 95% CI 1.08–1.97) and the presence of asthma, atopic dermatitis or allergies (OR 1.25; 95% CI: 1.093–1.43). Rural residence was the only factor associated with MRSA colonization (OR 3.62, 95% CI 1.57–8.36). MRSA was more frequently resistant than methicillin-susceptible S. aureus to ciprofloxacin [41.2% vs 2.6%; p<0.0001], clindamycin [26% vs 16.9%; p=0.39], and mupirocin [14.3% vs 6.7%; p=0.18]. None of the MRSA strains was resistant to tetracycline, fosfomycin, vancomycin or daptomycin. Conclusions: The main risk factors for S. aureus colonization in Spanish children are being above five years of age, male gender, atopic dermatitis, asthma or allergy, and residence in urban areas. MRSA colonization is low, but higher than in other European countries and is associated with rural settings

Characterization of methicillin-resistant Staphylococcus aureus strains colonizing the nostrils of Spanish children

Objective: To characterize the Staphylococcus aureus strains colonizing healthy Spanish children. Methods: Between March and July 2018, 1876 Spanish children younger than 14 years attending primary healthcare centers were recruited from rural and urban areas. Staphylococcus aureus colonization of the anterior nostrils was analyzed. MecA and mecC genes, antibiotic susceptibility, and genotyping according to the spa were determined in all strains, and the following toxins were examined: Panton-Valentine leucocidin (pvl), toxic shock syndrome toxin (tst), and exfoliative toxins (eta, etb, etd). Multilocus sequence typing (MLST) and staphylococcal cassette chromosome (SCCmec) typing were performed on methicillin-resistant Staphylococcus aureus (MRSA) strains, as well as pulsed-field gel electrophoresis (PFGE). Results: 619 strains were isolated in 1876 children (33%), and 92% of them were sent for characterization to the Spanish National Centre of Microbiology (n = 572). Twenty (3.5%) of these strains were mecA-positive. Several spa types were detected among MRSA, being t002 the most frequently observed (30%), associating with SCCmec IVc. Among MSSA, 33% were positive for tst, while only 0.73% were positive for pvl. The 20 MRSA strains were negative for pvl, and 6 (30%) harbored the tst gene. Conclusions: methicillin-resistant Staphylococcus aureus nasal colonization in Spanish children is rare, with t002 being the most observed spa type, associated with SCCmec IVc. None of the MRSA strains produced pvl, but up to 30% of S. aureus strains were positive for tst

Gaia Data Release 1: the archive visualisation service

Context. The first Gaia data release (DR1) delivered a catalogue of astrometry and photometry for over a billion astronomical sources. Within the panoplyof methods used for data exploration, visualisation is often the starting point and even the guiding reference for scientific thought. However, this is a volume of data that cannot be efficiently explored using traditional tools, techniques, and habits. Aims. We aim to provide a global visual exploration service for the Gaia archive, something that is not possible out of the box for most people. The service has two main goals. The first is to provide a software platform for interactive visual exploration of the archive contents, using common personal computers and mobile devices available to most users. The second aim is to produce intelligible and appealing visual representations of the enormous information content of the archive. Methods. The interactive exploration service follows a client-server design. The server runs close to the data, at the archive, and is responsible for hiding as far as possible the complexity and volume of the Gaia data from the client. This is achieved by serving visual detail on demand. Levels of detail are pre-computed using data aggregation and subsampling techniques. For DR1, the client is a web application that provides an interactive multi-panel visualisation workspace as well as a graphical user interface. Results. The Gaia archive Visualisation Service offers a web-based multi-panel interactive visualisation desktop in a browser tab. It currently provides highly configurable 1D histograms and 2D scatter plots of Gaia DR1 and the Tycho-Gaia Astrometric Solution (TGAS) with linked views. An innovative feature is the creation of ADQL queries from visually defined regions in plots. These visual queries are ready for use in the Gaia Archive Search/data retrieval service. In addition, regions around user-selected objects can be further examined with automatically generated SIMBAD searches. Integration of the Aladin Lite and JS9 applications add support to the visualisation of HiPS and FITS maps. The production of the all-sky source density map that became the iconic image of Gaia DR1 is described in detail. Conclusions. On the day of DR1, over seven thousand users accessed the Gaia Archive visualisation portal. The system, running on a single machine, proved robust and did not fail while enabling thousands of users to visualise and explore the over one billion sources in DR1. There are still several limitations, most noticeably that users may only choose from a list of pre-computed visualisations. Thus, other visualisation applications that can complement the archive service are examined. Finally, development plans for Data Release 2 are presented

Prospective multicenter study of carbapenemase-producing Enterobacteriaceae from 83 hospitals in Spain reveals high in vitro susceptibility to colistin and meropenem

The aim of this study was to determine the impact of carbapenemase-producing Enterobacteriaceae (CPE) in Spain in 2013 by describing the prevalence, dissemination, and geographic distribution of CPE clones, and their population structure and antibi- otic susceptibility. From February 2013 to May 2013, 83 hospitals (about 40,000 hospital beds) prospectively collected nondupli- cate Enterobacteriaceae using the screening cutoff recommended by EUCAST. Carbapenemase characterization was performed by phenotypic methods and confirmed by PCR and sequencing. Multilocus sequencing types (MLST) were determined for Kleb- siella pneumoniae and Escherichia coli. A total of 702 Enterobacteriaceae isolates met the inclusion criteria; 379 (54%) were CPE. OXA-48 (71.5%) and VIM-1 (25.3%) were the most frequent carbapenemases, and K. pneumoniae (74.4%), Enterobacter cloacae (10.3%), and E. coli (8.4%) were the species most affected. Susceptibility to colistin, amikacin, and meropenem was 95.5%, 81.3%, and 74.7%, respectively. The most prevalent sequence types (STs) were ST11 and ST405 for K. pneumoniae and ST131 for E. coli. Forty-five (54.1%) of the hospitals had at least one CPE case. For K. pneumoniae, ST11/OXA-48, ST15/OXA-48, ST405/ OXA-48, and ST11/VIM-1 were detected in two or more Spanish provinces. ST11 isolates carried four carbapenemases (VIM-1, OXA-48, KPC-2, and OXA-245), but ST405 isolates carried OXA-48 only. A wide interregional spread of CPE in Spain was ob- served, mainly due to a few successful clones of OXA-48-producing K. pneumoniae (e.g., ST11 and ST405). The dissemination of OXA-48-producing E. coli is a new finding of public health concern. According to the susceptibilities determined in vitro, most of the CPE (94.5%) had three or more options for antibiotic treatment

Prospective multicenter study of carbapenemase-producing Enterobacteriaceae from 83 hospitals in Spain reveals high in vitro susceptibility to colistin and meropenem

The aim of this study was to determine the impact of carbapenemase-producing Enterobacteriaceae (CPE) in Spain in 2013 by describing the prevalence, dissemination, and geographic distribution of CPE clones, and their population structure and antibiotic susceptibility. From February 2013 to May 2013, 83 hospitals (about 40,000 hospital beds) prospectively collected nonduplicate Enterobacteriaceae using the screening cutoff recommended by EUCAST. Carbapenemase characterization was performed by phenotypic methods and confirmed by PCR and sequencing. Multilocus sequencing types (MLST) were determined for Klebsiella pneumoniae and Escherichia coli. A total of 702 Enterobacteriaceae isolates met the inclusion criteria; 379 (54%) were CPE. OXA-48 (71.5%) and VIM-1 (25.3%) were the most frequent carbapenemases, and K. pneumoniae (74.4%), Enterobacter cloacae (10.3%), and E. coli (8.4%) were the species most affected. Susceptibility to colistin, amikacin, and meropenem was 95.5%, 81.3%, and 74.7%, respectively. The most prevalent sequence types (STs) were ST11 and ST405 for K. pneumoniae and ST131 for E. coli. Forty-five (54.1%) of the hospitals had at least one CPE case. For K. pneumoniae, ST11/OXA-48, ST15/OXA-48, ST405/OXA-48, and ST11/VIM-1 were detected in two or more Spanish provinces. ST11 isolates carried four carbapenemases (VIM-1, OXA-48, KPC-2, and OXA-245), but ST405 isolates carried OXA-48 only. A wide interregional spread of CPE in Spain was observed, mainly due to a few successful clones of OXA-48-producing K. pneumoniae (e.g., ST11 and ST405). The dissemination of OXA-48-producing E. coli is a new finding of public health concern. According to the susceptibilities determined in vitro, most of the CPE (94.5%) had three or more options for antibiotic treatment.This work was supported by a grant from the Fondo de Investigación Sanitaria (grant PI12/01242); the Antibiotic Resistance Surveillance Programme of the Spanish Centro Nacional de Microbiología, Instituto de Salud Carlos III, Ministerio de Economía y Competitividad; the Plan Nacional de I+D+I 2008–2011; and the Instituto de Salud Carlos III, Subdirección General de Redes y Centros de Investigación Cooperativa, Ministerio de Economía y Competitividad, Spanish Network for Research in Infectious Diseases (REIPI RD12/0015), cofinanced by the European Development Regional Fund (ERDF) “A way to achieve Europe.”S

Gaia Focused Product Release: Radial velocity time series of long-period variables

Context. The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity data planned with Data Release 4, this Focused Product Release (FPR) provides radial-velocity time series for a selection of LPV candidates with high-quality observations. Aims. We describe the production and content of the Gaia catalog of LPV radial-velocity time series, and the methods used to compute the variability parameters published as part of the Gaia FPR. Methods. Starting from the DR3 catalog of LPV candidates, we applied several filters to construct a sample of sources with high-quality radial-velocity measurements. We modeled their radial-velocity and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the radial-velocity period and at least one of the G, GBP, or GRP photometric periods. Results. The catalog includes radial-velocity time series and variability parameters for 9614 sources in the magnitude range 6 ≲ G/mag ≲ 14, including a flagged top-quality subsample of 6093 stars whose radial-velocity periods are fully compatible with the values derived from the G, GBP, and GRP photometric time series. The radial-velocity time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great majority of the sources (88%) as genuine LPV candidates, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% of the catalog consists of candidate ellipsoidal binaries. Quality checks against radial velocities available in the literature show excellent agreement. We provide some illustrative examples and cautionary remarks. Conclusions. The publication of radial-velocity time series for almost ten thousand LPV candidates constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog

La matèria fosca i les seves alternatives o un cas d'hipòtesi pendent de confirmació

VII Jornada de Divulgació de Relativitat a l'Escola d'Enginyeria de Terrass

Biaxial versus uniaxial strain tuning of single-layer MoS2

Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we implemented a simple experimental setup that allows to apply biaxial strain through the bending of a cruciform polymer substrate. We used the setup to study the effect of biaxial strain on the differential reflectance spectra of 12 single-layer MoS2 flakes finding a redshift of the excitonic features at a rate between −40 meV/% and −110 meV/% of biaxial tension. We also directly compare the effect of biaxial and uniaxial strain on the same single-layer MoS2 finding that the biaxial strain gauge factor is 2.3 times larger than the uniaxial strain one