Rapid Development of ACI Documents

ACI has taken several steps to permit technology to be transferred more rapidly than in the past. ITGs, with their limited mission and lifetime, represent one of the tools for accomplishing this goal through the rapid development of standardized ACI documents. It is a tool that the developers of new technology and ACI committees would be wise to adopt

Flexural Properties of Lumber from a 50-Year-Old Loblolly Pine Plantation

Flexural properties of dimension lumber from a 50-year-old loblolly pine plantation stand were evaluated. The results indicate very impressive visual grade recovery, particularly No. 1, which amounted to about 44% yield. The results also indicate that the overall degrees of compliance of visually graded lumber to standard SPIB requirements of strength and stiffness are 99 and 94%, respectively

A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties

The hardened ordinary Portland cement (OPC) surface layer of concrete which was glazed using a CO2 and a high power diode laser (see Part I of this paper) has been tested in order to determine the mechanical, chemical and physical characteristics of the glazes. The work showed that the generation of the surface glazes resulted in improved mechanical, chemical and physical properties over the untreated OPC surface of concrete. However, differences in the performance of the CO2 and HPDL generated glazes were observed. These are believed to be due to the differences in the morphology and microstructure of the glazes generated as a result of the differing beam absorption characteristics of the two lasers. Life assessment testing revealed that the laser glazed OPC surfaces effected an increase in actual wear life of 1.3 to 17.7 times over the untreated OPC surface of concrete depending upon the corrosive environment

Integrating Economic Performance and Process Simulation Models in Evaluating Sawmill Design Alternatives

This paper describes a simulation study that combines an economic performance measure and a process simulation model. This integrated approach is capable of capturing the operational and cost behavior of a sawmill system over time by taking into consideration the effects of the stochastic occurrence of machine breakdowns and other processing delays. The method is demonstrated using an actual design problem involving a profiler chipper-canter mill

Flexural Properties of Lumber from Two 40-Year-Old Loblolly Pine Plantations with Different Stand Densities

The effects of stand density on the flexural properties and compliance-to-grade requirements of lumber from two 40-year-old loblolly pine plantations were evaluated. The results indicate that stand density is positively influencing the flexural stiffness and grade compliance of the lumber produced from these plantations. On the other hand, stand density had no effect on the flexural strength of the lumber from these plantations. The lumber from the denser 40-year-old stand, which had 28 m/50 yr site index, 2.4-by 2.4-m original spacing, never thinned, with 679 trees/ha and 11.4-sq m basal area at harvest, has 96% and 66% compliance to required flexural strength and stiffness values, respectively. The lumber from the thinned 40-year-old stand, with 28 m/50 yr site index, 2.4-by 2.4-m original spacing, thinned at age 25, with 450 trees/ha and 10.2-sq m basal area at harvest, has 96% and 53% compliance to required flexural strength and stiffness values, respectively. It is now evident from the results of these studies that even dense stands must be older than 40 years of age before they can be harvested for lumber production to ensure attainment of at least 95% lumber grade compliance, i.e., strength and stiffness values that are consistent with assigned visual grades

Dialogue across Indigenous, local and scientific knowledge systems reflecting on the IPBES Assessment on Pollinators, Pollination and Food Production

The Dialogue across Indigenous, local and scientific knowledge systems reflecting on the IPBES Assessment on Pollinators, Pollination and Food Production report presents the main outcomes of a Dialogue across Indigenous, local and scientific knowledge systems that revisited and reflected on the key messages derived from the Assessment Report on Pollinators, Pollination and Food Production of the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES). The Dialogue was hosted from the 21st to the 25th of January 2019 by the Karen community of Hin Lad Nai, Chiang Rai, Thailand, and it was co-convened and jointly designed by the Inter Mountain Peoples Education and Culture in Thailand Association (IMPECT) and Pgakenyaw Association for Sustainable Development (PASD) together with SwedBio at the Stockholm Resilience Centre and UNESCO Natural Science Sector

Impact echo data from bridge deck testing: Visualization and interpretation

Accurate assessment of the condition of bridges leads to their economic management. Ultrasonic seismic methods can be successfully used for this purpose through evaluation of changes in material characteristics and detection of the development of defects and zones of deterioration. The impact echo (IE) method is of special benefit in evaluation of corrosion-induced deck delamination, due to the method's nondestructive nature, speed of evaluation, and ability to detect delaminated zones at various stages of deterioration: from initial to progressed and developed. The traditional approach in condition assessment of bridge decks by IE on the basis of review of individual test point records and a new automated approach based on three-dimensional (3-D) data visualization are presented. The developed 3-D visualization platform allows both the advanced presentation and interpretation of IE data. The data presentation is provided as 3-D translucent visualizations of reflectors in a bridge deck section and horizontal and vertical cross sections through all distinctive zones, including a zone of delamination. The associated interpretation platform allows both (a) the overall assessment of the condition of the deck, through cumulative distributions and histograms of reflection intensity, and (b) identification of deteriorated zones of the deck for repair or rehabilitation in an efficient and intuitive way. The visualization platform effectively enables an IE device to be used as a type of bridge deck sonar device

Parallel Evaluation of Multi-join Queries

A number of execution strategies for parallel evaluation of multi-join queries have been proposed in the literature. In this paper we give a comparative performance evaluation of four execution strategies by implementing all of them on the same parallel database system, PRISMA/DB. Experiments have been done up to 80 processors. These strategies, coming from the literature, are named: Sequential Parallel, Synchronous Execution, Segmented Right-Deep, and Full Parallel. Based on the experiments clear guidelines are given when to use which strategy. This is an extended abstract; the full paper appeared in Proc. ACM SIGMOD'94, Minneapolis, Minnesota, May 24–27, 199

Comparación de frecuencias alélicas y genotípicas de los polimorfismos CAPN1-316 Y CAPN1-4751 del gen de la Calpaina en tres poblaciones de ganado criollo boliviano

La terneza de la carne está en parte determinada por el sistema proteico calpaína (CAPN1) / calpastatina (CAST). Bolivia posee en los llanos tres biotipos de ganado Criollo: los Yacumeños, los Chaqueños y los Saavedreños. El objetivo del presente trabajo fue determinar la frecuencia alélica y genotípica del gen de la CAPN1 en tres poblaciones de ganado Criollo de Bolivia. Se obtuvieron muestras de sangre de 28 Criollos del Chaco (CCH), 85 Criollos Yacumeños (CYA) y 30 Criollos Saavedreños (CSV). El ADN se extrajo utilizando el kit comercial Wizard® Genomic Purification, y posteriormente se tipificaron dos polimorfismos (CAPN1-316 y CAPN1-4751) del gen CAPN1 mediante el método ARMS-PCR. La frecuencias alélicas y genotípicas, las heterocigosidades esperadas y observadas, así como, el índice FIS y el desequilibrio de ligamiento (LD) fueron calculadas mediante los programas MS-Tools y Genepop. Las frecuencias de los alelos asociados a mayor terneza para las poblaciones de CCH, CYA y CSV fueron: 23%, 22% y 33 % para el alelo C del SNP CAPN1-316 y 75%, 76% y 60% para el alelo C del CAPN1-4751. La heterocigocidad observada en las tres poblaciones se hallan en un rango de 0,30 a 0,46 para el marcador CAPN1-316 y de 0,21 a 0,60 para el polimorfismo CAPN1-4751. Los resultados demuestran que los bovinos criollos en las poblaciones analizadas poseen altas frecuencias alélicas para las variantes asociadas a mayor terneza de la carne. Por otra parte, no se observaron valores significativos de LD (P>0,01) entre los dos polimorfismos tipificados en las poblaciones estudiadas. Sería necesario tipificar ambos polimorfismos en futuros programas de selección asistida por marcadores genéticos.Meat tenderness is in part determined by the calpain (CAPN1) / calpastatin (CAST) genes. In the lowlands of Bolivia, three well differentiated Creole cattle populations can be distinguished: the Yacumeños, Chaqueños and Saavedreños. The main objective of this research was to determine the allelic and genotypic frequencies of two polymorphisms of the calpain gene in three Creole cattle populations in Bolivia. Blood samples of 28 Creole cattle from Chaqueño cattle (CCH), 85 from Yacumeño cattle (CYA) and 30 from Saavadreño cattle (CSV) were collected. Total DNA was extracted using the commercial kit Wizard® Genomic Purification and subsequently two polymorphisms (CAPN1-316 and CAPN1- 4751) of the CAPN1 gene were genotyped by the amplification refractory mutation system (ARMS-PCR) method. Allelic and genotypic frequencies, expected and observed heterozygosities, the FIS index and the magnitude of linkage disequilibrium (LD) were calculated using the software MS-Tools and Genepop. The allelic frequencies of variants associated with tenderness in the three populations CCH, CYA and CSV were 23%, 22% and 23% for the CAPN1- 316 and 75%, 76% and 60% for the CAPN1-4751. The observed heterozygosities in the three populations fluctuated between 0.30 and 0.46 for the CAPN1-316 marker and between 0.21 and 0.60 for the CAPN1-4751 marker. The results showed that the analysed populations of Creole cattle presented high frequencies of the alleles previously associated with tenderness in meat. The analysis of LD, however, did not show evidence of linkage between the two markers. It is necessary to perform a genetic analysis for both polymorphisms if included in future selection programs.Fil: Pereira, J. A. C.. Universidad Autónoma Gabriel René Moreno; BoliviaFil: Falomir Lockhart, Agustin Horacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Instituto de Genética Veterinaria "Ingeniero Fernando Noel Dulout"; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias; ArgentinaFil: Loza, A.. Universidad Autónoma Gabriel René Moreno; BoliviaFil: Villegas Castagnasso, Egle Etel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Instituto de Genética Veterinaria "Ingeniero Fernando Noel Dulout"; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias; ArgentinaFil: Rojas, P.. Universidad Autónoma Gabriel René Moreno; BoliviaFil: Carino, M. . Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Instituto de Genética Veterinaria "Ingeniero Fernando Noel Dulout"; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias; ArgentinaFil: Ripoli, María Verónica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Instituto de Genética Veterinaria "Ingeniero Fernando Noel Dulout"; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias; ArgentinaFil: Giovambattista, Guillermo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Instituto de Genética Veterinaria "Ingeniero Fernando Noel Dulout"; Argentina. Universidad Nacional de La Plata. Facultad de Ciencias Veterinarias; Argentin