Simultaneous junction formation

High-risk, high-payoff improvements to a baseline process sequence of simultaneous junction formation of silicon solar cells are discussed. The feasibility of simultaneously forming front and back junctions of solar cells using liquid dopants on dendritic web silicon was studied. Simultaneous diffusion was compared to sequential diffusion. A belt furnace for the diffusion process was tested

Dendritic web-type solar cell mini-modules

Twenty-five minimodules composed of dendritic web solar cells with nominal glass size of 12 by 40 cm were provided for study. The modules were identical with respect to design, materials, and manufacturing and assembly processes to full scale modules. The modules were also electrically functional. These minimodules were fabricated to provide test vehicle for environmental testing and to assess reliability of process and design procedures. The module design and performance are outlined

Process research of non-Czochralski silicon material

Simultaneous diffusion of liquid precursors containing phosphorus and boron into dendritic web silicon to form solar cell structures was investigated. A simultaneous junction formation techniques was developed. It was determined that to produce high quality cells, an annealing cycle (nominal 800 C for 30 min) should follow the diffusion process to anneal quenched-in defects. Two ohm-cm n-base cells were fabricated with efficiencies greater than 15%. A cost analysis indicated that the simultansous diffusion process costs can be as low as 65% of the costs of the sequential diffusion process

Whatever happened to silicon carbide

The progress made in silicon carbide semiconductor devices in the 1955 to 1975 time frame is examined and reasons are given for the present lack of interest in the material. Its physical and chemical properties and methods of preparation are discussed. Fabrication techniques and the characteristics of silicon carbide devices are reviewed. It is concluded that a combination of economic factors and the lack of progress in fabrication techniques leaves no viable market for SiC devices in the near future

Process research of non-CZ silicon material

Advanced processing techniques for non-CZ silicon sheet material that might improve the cost effectiveness of photovoltaic module production were investigated. Specifically, the simultaneous diffusion of liquid boron and liquid phosphorus organometallic precursors into n-type dendritic silicon web was examined. The simultaneous junction formation method for solar cells was compared with the sequential junction formation method. The electrical resistivity of the n-n and p-n junctions was discussed. Further research activities for this program along with a program documentation schedule are given

Collimated beam manifold with the number of output beams variable at a given output angle

An optical manifold is described which transforms a collimated beam, such as a laser beam, into a plurality of parallel beams having uniform intensity or having a desired intensity ratio. The manifold comprises an optical substrate coated on its rear surface with a fully reflective layer and on its front surface with a partially reflecting layer having a reflectivity gradient. An input collimated beam entering the rear surface and impinging on the front surface is reflected, multiply between the front and rear surfaces producing a plurality of parallel beams that emerge from the front surface. The intensities of the emerging beams have a relationship that depends on the reflectivity of the front surface at the points where the beams emerge. By properly selecting the reflectivity gradient, the emerging beams have uniform intensity or a desired intensity ratio

Conceptual development of the Laser Beam Manifold (LBM)

The laser beam manifold, a device for transforming a single, narrow, collimated beam of light into several beams of desired intensity ratios is described. The device consists of a single optical substrate with a metallic coating on both optical surfaces. By changing the entry point, the number of outgoing beams can be varied

The Array Automated Assembly Task for the Low Cost Solar Array Project, Phase 2

During the program a process sequence was proposed and tested for the fabrication of dendritic welb silicon into solar modules. This sequence was analyzed as to yield and cost and these data suggest that the price goals of 1986 are attainable. Specifically, it was shown that a low cost POCL3 is a suitable replacement for the semiconductor grade, and that a suitable CVD oxide can be deposited from a silane/air mixture using a Silox reactor. A dip coating method was developed for depositing an antireflection coating from a metalorganic precursor. Application of photoresist to define contact grids was made cost effective through use of a dip coating technique. Electroplating of both Ag and Cu was shown feasible and cost effective for producing the conductive metal grids on the solar cells. Laser scribing was used to separate the cells from the dendrites without degradation. Ultrasonic welding methods were shown to be feasible for interconnecting the cells. A study of suitable low cost materials for encapsulation suggest that soda lime glass and phenolic filled board are preferred

The Tactical and Strategic Value of Commodity Futures

Historically, commodity futures have had excess returns similar to those of equities. But what should we expect in the future? The usual risk factors are unable to explain the time-series variation in excess returns. In addition, our evidence suggests that commodity futures are an inconsistent, if not tenuous, hedge against unexpected inflation. Further, the historically high average returns to a commodity futures portfolio are largely driven by the choice of weighting schemes. Indeed, an equally weighted long-only portfolio of commodity futures returns has approximately a zero excess return over the past 25 years. Our portfolio analysis suggests that the a long-only strategic allocation to commodities as a general asset class is a bet on the future term structure of commodity prices, in general, and on specific portfolio weighting schemes, in particular. In contrast, we provide evidence that there are distinct benefits to an asset allocation overlay that tactically allocates using commodity futures exposures. We examine three trading strategies that use both momentum and the term structure of futures prices. We find that the tactical strategies provide higher average returns and lower risk than a long-only commodity futures exposure.

The effect of human activities on moisture content of soils and underlying permafrost from the McMurdo Sound region, Antarctica

Soils and the underlying permafrost from undisturbed sites and sites that had been disturbed by construction activities at Marble Point and Pram Point in the McMurdo Sound region were sampled from excavated pits and drill cores. Gravimetric moisture (ice) contents and particle size distribution were determined. Volumetric moisture contents were calculated from these results. At undisturbed sites soil moisture contents within the active layer (to c. 60 cm depth) were low and ranged from 0.5% by weight at the soil surface to 10% above the permafrost. The permafrost was generally completely saturated with ice, but sometimes contained considerable excess ice, with ice contents rising as high as 80% by volume. At disturbed sites, soil moisture contents within the active layer were similar to those of the undisturbed sites (generally <10% by weight) but within the permafrost, moisture contents were lower and less variable than in the undisturbed sites, rarely exceeding 20% by weight. The release of considerable quantities of water from the permafrost as a result of land disturbance during construction activities caused stream flows, soil shrinkage, land slumping and salinisation, resulting in significant permanent environmental damage. At Marble Point there has been no significant re-establishment of icy permafrost in the disturbed soils in the 30 years since land disturbance occurred