Design, fabrication and test of liquid metal heat-pipe sandwich panels

Integral heat-pipe sandwich panels, which synergistically combine the thermal efficiency of heat pipes and the structural efficiency of honeycomb sandwich panel construction, were fabricated and tested. The designs utilize two different wickable honeycomb cores, facesheets with screen mesh sintered to the internal surfaces, and potassium or sodium as the working fluid. Panels were tested by radiant heating, and the results indicate successful heat pipe operation at temperatures of approximately 922K (1200F). These panels, in addition to solving potential thermal stress problems in an Airframe-Integrated Scramjet Engine, have potential applications as cold plates for electronic component cooling, as radiators for space platforms, and as low distortion, large area structures

Radiant heating tests of several liquid metal heat-pipe sandwich panels

Integral heat pipe sandwich panels, which synergistically combine the thermal efficiency of heat pipes and the structural efficiency of honeycomb sandwich construction, were conceived as a means of alleviating thermal stress problems in the Langley Scramjet Engine. Test panels which utilized two different wickable honeycomb cores, facesheets with screen mesh sintered to the internal surfaces, and a liquid metal working fluid (either sodium or potassium) were tested by radiant heating at various heat load levels. The heat pipe panels reduced maximum temperature differences by 31 percent with sodium working fluid and 45 percent with potassium working fluid. Results indicate that a heat pipe sandwich panel is a potential, simple solution to the engine thermal stress problem. Other interesting applications of the concept include: cold plates for electronic component and circuit card cooling, radiators for large space platforms, low distortion large area structures (e.g., space antennas) and laser mirrors

Elevated-temperature application of the IITRI compression test fixture for graphite/polyimide filamentary composites

Seventy-nine graphite/polyimide compression specimens were tested to investigate experimentally the IITRI test method for determining compressive properties of composite materials at room and elevated temperatures (589 K (600 F)). Minor modifications were made to the standard IITRI fixture and a high degree of precision was maintained in specimen fabrication and load alignment. Specimens included four symmetric laminate orientations. Various widths were tested to evaluate the effect of width on measured modulus and strength. In most cases three specimens of each width were tested at room and elevated temperature and a polynomial regression analysis was used to reduce the data. Scatter of replicate tests and back-to-back strain variations were low, and no specimens failed by instability. Variation of specimen width had a negligible effect on the measured ultimate strengths and initial moduli of the specimens. Measured compressive strength and stiffness values were sufficiently high for the material to be considered a usable structural material at temperatures as high as 589 K (600 F)

Giant enchondroma recurrence of the proximal phalanx of the fifth finger: A case report

Enchondroma (EC) is a benign and cartilage-forming tumor that causes intramedullary lesions. Moreover, EC is the most common bone tumor in the phalanges and metacarpal bones of the hand, deforming the structure and causing pain and functional limitation. The management of this neoplasia is the surgical treatment and the approach that is well-accepted consists in the curettage followed by the void augmentation with biological or synthetic fillers. The results from surgery are usually good and the recurrence rate is low (2-15%). In this article we report a case of EC recurrence of the proximal phalanx of the fifth finger of the hand after curettage and grafting. The patient was treated with the amputation of the fifth ray according to the Tsuge technique, obtaining a satisfying clinical result

Overview about E-Mobility Conducted Immunity Tests on ESA Communication Lines

Due to the complexity of the Automotive Electromagnetic Compatibility legislation in force, this article aims to describe a simplified overview of several technical standards relating to conducted immunity tests on electronic sub-assemblies, where communication lines are involved. The discussed automotive standards reported in this article are: ISO 11452-1 and ISO 11452-4 for continuous narrowband electromagnetic fields immunity test, bulk current injection and tubular wave coupler, IEC 61000-4-5 for immunity against surge events, IEC 61000-4-4 for electrical fast transient/burst events immunity, ISO 10605 for electrostatic discharge events immunity, ISO 7637-2 and ISO 7637-3 for transient disturbances events immunity. For each cited standard, disturbance bandwidth evaluation was performed. Practical examples are reported, with analysis and discussion of some of the adoptable disturbance countermeasures applicable on controlled area network communication lines, and possible design advantages and disadvantages with different types of filtering and suppression circuit solutions

Dynamical Bar-Mode Instability in Differentially Rotating Magnetized Neutron Stars

This paper presents a numerical study over a wide parameter space of the likelihood of the dynamical bar-mode instability in differentially rotating magnetized neutron stars. The innovative aspect of this study is the incorporation of magnetic fields in such a context, which have thus far been neglected in the purely hydrodynamical simulations available in the literature. The investigation uses the Cosmos++ code which allows us to perform three dimensional simulations on a cylindrical grid at high resolution. A sample of Newtonian magneto-hydrodynamical simulations starting from a set of models previously analyzed by other authors without magnetic fields has been performed, providing estimates of the effects of magnetic fields on the dynamical bar-mode deformation of rotating neutron stars. Overall, our results suggest that the effect of magnetic fields are not likely to be very significant in realistic configurations. Only in the most extreme cases are the magnetic fields able to suppress growth of the bar mode.Comment: 12 pages, 16 figures. References added and minor edits made to match published versio

Migraine mediates the influence of C677T MTHFR genotypes on ischemic stroke risk with a stroke-subtype effect.

BACKGROUND AND PURPOSE: The objective was to investigate the role of C677T MTHFR polymorphism in migraine pathogenesis and in the migraine-ischemic stroke pathway. METHODS: A first genotype-migraine association study was conducted on 100 patients with migraine with aura (MA), 106 with migraine without aura (MO), and 105 subjects without migraine, which provided evidence in favor of association of the TT677 MTHFR genotype with increased risk of MA compared with both control subjects (OR, 2.48; 95% CI, 1.11 to 5.58) and patients with MO (OR, 2.21; 95% CI, 1.01 to 4.82). Based on these findings, mediational models of the genotype-migraine-stroke pathway were fitted on a group of 106 patients with spontaneous cervical artery dissection, 227 young patients whose ischemic stroke was unrelated to a spontaneous cervical artery dissection (noncervical artery dissection), and 187 control subjects, and a genotype-migraine partial mediation model was selected. RESULTS: Both migraine and the TT genotype were more strongly associated to the subgroup of patients with spontaneous cervical artery dissection (OR, 4.06; 95% CI, 1.63 to 10.02 for MA; OR, 5.45; 95% CI, 3.03 to 9.79 for MO; OR, 2.87; 95% CI, 1.45 to 5.68 for TT genotype) than to the subgroup of patients with noncervical artery dissection ischemic stroke (OR, 2.22; 95% CI, 1.00 to 4.96 for MA; OR, 1.81; 95% CI, 1.02 to 3.22 for TT genotype) as compared with controls. CONCLUSIONS: Migraine may act as mediator in the methylenetetrahydrofolate reductase-ischemic stroke pathway with a more prominent effect in the subgroup of patients with spontaneous artery dissection

Frequency dependence of the microwave surface resistance of MgB2 by coaxial cavity resonator

We report on the microwave (mw) properties of a cylindrical MgB2 rod prepared by the reactive liquid Mg infiltration technology. The MgB2 rod, 94.3 mm long, is used as inner conductor of a coaxial cavity having a Cu tube as external conductor. By analyzing the resonance curves of the cavity in the different resonant modes and at different temperatures, we have determined the temperature dependence of the mw surface resistance, Rs, of the MgB2 material, at fixed frequencies, and the frequency dependence of Rs, at fixed temperatures. Our results show that the Rs(f) curves follow a f^n law, where n decreases on increasing the temperature, starting from n=2, at T=4.2 K, down to n=0.7 at T>Tc. The double gap nature of MgB2 manifests itself in the presence of a wide low-T tail in the R(T) curves, which can be ascribed to the quasiparticles thermally excited through the pi gap even at relatively low temperatures

Three Dimensional Distorted Black Holes

We present three-dimensional, {\it non-axisymmetric} distorted black hole initial data which generalizes the axisymmetric, distorted, non-rotating [Bernstein93a] and rotating [Brandt94a] single black hole data developed by Bernstein, Brandt, and Seidel. These initial data should be useful for studying the dynamics of fully 3D, distorted black holes, such as those created by the spiraling coalescence of two black holes. We describe the mathematical construction of several families of such data sets, and show how to construct numerical solutions. We survey quantities associated with the numerically constructed solutions, such as ADM masses, apparent horizons, measurements of the horizon distortion, and the maximum possible radiation loss ($MRL$).Comment: 23 pages, 12 figures, accepted for publication in Classical and Quantum Gravit