Magnetically Driven Floating Foams for the Removal of Oil Contaminants from Water

In this study, we present a novel composite material based on commercially available polyurethane foams functionalized with colloidal superparamagnetic iron oxide nanoparticles and submicrometer polytetrafluoroethylene particles, which can efficiently separate oil from water. Untreated foam surfaces are inherently hydrophobic and oleophobic, but they can be rendered water-repellent and oil-absorbing by a solvent-free, electrostatic polytetrafluoroethylene particle deposition technique. It was found that combined functionalization of the polytetrafluoroethylene-treated foam surfaces with colloidal iron oxide nanoparticles significantly increases the speed of oil absorption. Detailed microscopic and wettability studies reveal that the combined effects of the surface morphology and of the chemistry of the functionalized foams greatly affect the oil-absorption dynamics. In particular, nanoparticle capping molecules are found to play a major role in this mechanism. In addition to the water-repellent and oil-absorbing capabilities, the functionalized foams exhibit also magnetic responsivity. Finally, due to their light weight, they float easily on water. Hence, by simply moving them around oil-polluted waters using a magnet, they can absorb the floating oil from the polluted regions, thereby purifying the water underneath. This low-cost process can easily be scaled up to clean large-area oil spills in wate

New evidence of mis 3 relative sea level changes from the messina strait, Calabria (Italy)

none12Investigation of sea-level positions during the highly-dynamic Marine Isotope Stage 3 (MIS 3: 29–61 kyrs BP) proves difficult because: (i) in stable and subsiding areas, coeval coastal sediments are currently submerged at depths of few to several tens of meters below the present sea level; (ii) in uplifting areas, the preservation of geomorphic features and sedimentary records is limited due to the erosion occurred during the Last Glacial Maximum (LGM) with sea level at a depth of −130 m, followed by marine transgression that determined the development of ravinement surfaces. This study discusses previous research in the Mediterranean and elsewhere, and describes new fossiliferous marine deposits overlaying the metamorphic bedrock at Cannitello (Calabria, Italy). Radiocarbon ages of marine shells (about 43 kyrs cal BP) indicate that these deposits, presently between 28 and 30 m above sea level, formed during MIS 3.1. Elevation correction of the Cannitello outcrops (considered in an intermediate-to-far-field position with respect to the ice sheet) with the local vertical tectonic rate and Glacial Isostatic Adjustment (GIA) rate allows the proposal of a revision of the eustatic depth for this highstand. Our results are consistent with recently proposed estimates based on a novel ice sheet modelling technique.openAntonioli F.; Calcagnile L.; Ferranti L.; Mastronuzzi G.; Monaco C.; Orru P.; Quarta G.; Pepe F.; Scardino G.; Scicchitano G.; Stocchi P.; Taviani M.Antonioli, F.; Calcagnile, L.; Ferranti, L.; Mastronuzzi, G.; Monaco, C.; Orru, P.; Quarta, G.; Pepe, F.; Scardino, G.; Scicchitano, G.; Stocchi, P.; Taviani, M

Interplay between non-coding rna transcription, stringent/relaxed phenotype and antibiotic production in streptomyces ambofaciens

While in recent years the key role of non-coding RNAs (ncRNAs) in the regulation of gene expression has become increasingly evident, their interaction with the global regulatory circuits is still obscure. Here we analyzed the structure and organization of the transcriptome of Streptomyces ambofaciens, the producer of spiramycin. We identified ncRNAs including 45 small-RNAs (sRNAs) and 119 antisense-RNAs (asRNAs I) that appear transcribed from dedicated promoters. Some sRNAs and asRNAs are unprecedented in Streptomyces and were predicted to target mRNAs encoding proteins involved in transcription, translation, ribosomal structure and biogenesis, and regulation of morphological and biochemical differentiation. We then compared ncRNA expression in three strains: (i) the wild-type strain; (ii) an isogenic pirA-defective mutant with central carbon metabolism imbalance, “relaxed” phenotype, and repression of antibiotic production; and (iii) a pirA-derivative strain harboring a “stringent” RNA polymerase that suppresses pirA-associated phenotypes. Data indicated that the expression of most ncRNAs was correlated to the stringent/relaxed phenotype suggesting novel effector mechanisms of the stringent response

Thermal neutron conversion by high purity 10B-enriched layers: PLD-growth, thickness-dependence and neutron-detection performances

Neutron applications and detection are of paramount importance in industry, medicine, scientific research, homeland security, production of extreme UV optics and so on. Neutron detection requires a converter element that, as a result of its interaction with neutrons, produces reaction products (mainly charged particles) whose detection can be correlated with the neutron flux. Reduced availability and increased cost of the most used converter element, 3He, have triggered research efforts for alternative materials, proper deposition methods and new detector architectures. 10B converter is a valid alternative to 3He thanks to its high thermal neutron cross section and relatively high Q value. In this paper we report on the room temperature Pulsed Laser Deposition (PLD) of high quality and uniform 10B films with the expected density, different thickness values (0.5, 1.0, 1.2, 1.5 and 2.0 μm) and uniform thickness over a circular area of about 30 mm in diameter. Additionally, they are adherent to the substrate with a negligible presence of contaminants. The conversion properties of such 10B coatings coupled to a Si solid state detector are studied upon exposure to a neutron flux from an Am-Be neutron source (2.2·106 n/s). The experimental results, compared with spectra simulated by using a GEANT4 code, present a good agreement and efficiencies of the order of a few percent

The use of Versius CMR for pelvic surgery: a multicentric analysis of surgical setup and early outcomes

IntroductionVersius CMR is a novel robotic system characterized by an open surgical console and independent bedside units. The system has potentials of flexibility and versatility, and has been used in urological, gynecological, and general surgical procedure. The aim is to depict a comprehensive analysis of the Versius system for pelvic surgery.MethodsThis is a study involving two Institutions, ASST Santi Paolo and Carlo, Milan, and Apuane Hospital, Massa, Italy. All interventions performed in the pelvic area with the Versius were included. Data about indications, intra-, and post-operative course were prospectively collected and analyzed.ResultsA total of 171 interventions were performed with the Versius. Forty-two of them involved pelvic procedures. Twenty-two had an oncological indication (localized prostate cancer), the remaining had a non-oncological or functional purpose. The mostly performed pelvic procedure was radical prostatectomy (22) followed by annexectomy (9). No intra-operative complication nor conversion to other approaches occurred. A Clavien II complication and one Clavien IIIb were reported. Malfunctioning/alarms requiring a power cycle of the system occurred in 2 different cases. An adjustment in trocar placement according to patients' height was required in 2 patients undergoing prostatectomy, in which the trocar was moved caudally. In two cases, a pelvic prolapse was repaired concomitant with other gynecological procedures.ConclusionsPelvic surgery with the Versius is feasible without major complications; either dissection and reconstructive steps could be accomplished, provided a proper OR setup and trocar placement are pursued. Versius can be easily adopted by surgeons of different disciplines and backgrounds; a further multi-specialty implementation is presumed and long-term oncological and functional outcomes are awaited

Sodium-gold thyosolphatum therapy: an open, viewed, multicenter trial in rheumatoid arthritis patients followed for two years

n/

Rifting in heterogeneous lithosphere inferences from numerical modeling of the northern North Sea and the Oslo Graben.

Permian rifting and magmatism are widely documented across NW Europe. The different Permian basins often display contrasting structural styles and evolved in lithospheric domains with contrasting past evolution and contrasting thermotectonic ages. In particular, the Oslo Graben and the northern North Sea rift initiated in close areas of northern Europe. The Oslo Graben evolved in the cold and stable Precambrian lithosphere of Fennoscandia, whereas the northern North Sea rift took birth in freshly reworked Caledonian lithosphere. Huge volumes of magmatic rocks characterize the relatively narrow Oslo Graben. In contrast, little magmatism is documented for the wide northern North Sea rift. Differences in timing between both rifts are inferred but still debated. We present numerical thermomechanical models along a lithospheric E-W section that involves both the Oslo Graben and the northern North Sea area. Because the modeled section crosses the boundary between Caledonian and Proterozoic provinces, thermal and compositional heterogeneities are considered. As is suggested by various geophysical data sets, we also consider lithospheric thickness heterogeneities in the Precambrian lithosphere. Modeling results suggest that the northern North Sea was on top of "weak" lithosphere very sensitive to far-field stresses. Consequently, we suggest that rifting in the northern North Sea began as early as regional extension was effective (i.e., Late Carboniferous-Early Permian) and does not postdate the Oslo Graben as it is commonly assumed. Rifting in the "strong" Precambrian lithosphere is unexpected. Modeling results suggest that a pre-existing lithospheric thickness contrast within the Fennoscandian lithosphere favored rifting in the Oslo Graben

Advances in structure elucidation of small molecules using mass spectrometry

The structural elucidation of small molecules using mass spectrometry plays an important role in modern life sciences and bioanalytical approaches. This review covers different soft and hard ionization techniques and figures of merit for modern mass spectrometers, such as mass resolving power, mass accuracy, isotopic abundance accuracy, accurate mass multiple-stage MS(n) capability, as well as hybrid mass spectrometric and orthogonal chromatographic approaches. The latter part discusses mass spectral data handling strategies, which includes background and noise subtraction, adduct formation and detection, charge state determination, accurate mass measurements, elemental composition determinations, and complex data-dependent setups with ion maps and ion trees. The importance of mass spectral library search algorithms for tandem mass spectra and multiple-stage MS(n) mass spectra as well as mass spectral tree libraries that combine multiple-stage mass spectra are outlined. The successive chapter discusses mass spectral fragmentation pathways, biotransformation reactions and drug metabolism studies, the mass spectral simulation and generation of in silico mass spectra, expert systems for mass spectral interpretation, and the use of computational chemistry to explain gas-phase phenomena. A single chapter discusses data handling for hyphenated approaches including mass spectral deconvolution for clean mass spectra, cheminformatics approaches and structure retention relationships, and retention index predictions for gas and liquid chromatography. The last section reviews the current state of electronic data sharing of mass spectra and discusses the importance of software development for the advancement of structure elucidation of small molecules