34 research outputs found

    Frobenius norm regularization for the multivariate von Misses distribution

    Get PDF
    Penalizing the model complexity is necessary to avoid overfittingwhen the number of data samples is low with respect to the number of model parameters. In this paper, we introduce a penalization term that places an independent prior distribution for each parameter of the multivariate von Mises distribution.We also propose a circular distance that can be used to estimate the Kullback–Leibler divergence between any two circular distributions as goodness-of-fit measure. We compare the resulting regularized von Mises models on synthetic data and real neuroanatomical data to show that the distribution fitted using the penalized estimator generally achieves better results than nonpenalized multivariate von Mises estimator

    Regularized multivariate von Mises distribution

    Get PDF
    Regularization is necessary to avoid overfitting when the number of data samples is low compared to the number of parameters of the model. In this paper, we introduce a flexible L1 regularization for the multivariate von Mises distribution. We also propose a circular distance that can be used to estimate the Kullback-Leibler divergence between two circular distributions by means of sampling, and also serves as goodness-of-fit measure. We compare the models on synthetic data and real morphological data from human neurons and show that the regularized model achieves better results than non regularized von Mises model

    Efecto de los parámetros de soldadura en mallas de acero electrosoldadas

    Get PDF
    El hormigón armado es el material utilizado por excelencia en la industria de la construcción. El refuerzo delhormigón es en general barras de acero nervuradas. En ciertas aplicaciones, resulta conveniente el empleo demallas y son empleadas en la mayoría de las estructuras de hormigón armado (edificios, carreteras, túneles ycomponentes prefabricados). Estas mallas de acero son en general electrosoldadas (PW: Projection Welding),donde el calor generado para producir la unión surge de la resistencia que oponen las piezas de trabajo alpaso de la corriente eléctrica, bajo la acción de presión mecánica. Dicho proceso presenta diversos parámetrosoperativos los cuales afectan la calidad de las uniones soldadas y la evolución microestructural que tienelugar durante la soldadura. La norma IRAM-IAS U 500-06 establece los requerimientos que deben cumplirdichas mallas electrosoldadas. El objetivo de este trabajo es estudiar la influencia de los parámetros de procesosobre la evolución microestructural y las propiedades mecánicas de las uniones de mallas electrosoldadas.Para esto se soldaron alambres nervurados ATR 500M de 4 mm de diámetro mediante PW con diferentesparámetros de soldadura. Se evaluó la influencia de la corriente de soldadura, el tiempo de soldadura, la fuerzay el tiempo de presoldadura. Sobre las uniones soldadas, se caracterizó la macro y microestructura, se realizaronperfiles de microdureza y ensayos de arrancamiento. Se realizaron comparaciones con mallas comercialesy se verificó el cumplimiento de los requisitos de la mencionada norma. Se observó un fuerte efectodel tiempo y la corriente de soldadura y se obtuvo un procedimiento optimizado.Palabras clave: malla electrosoldada, parámetros de soldadura, propiedades mecánicas, macroestructur

    Aplicación de Nudges en la enseñanza de Finanzas

    Get PDF
    Este trabajo describe una iniciativa para crear una red de colaboración que denominaremos “Nudge Unit en Finanzas” con el objetivo de testar el uso de intervenciones costo-efectivas que mejoren el desempeño de los estudiantes en el área de Finanzas. En el ámbito de la Innovación Docente, se presenta esta idea de intervención en la que se pretende contestar a la pregunta: ¿Podemos ayudar a los estudiantes a mejorar su desempeño en Finanzas a través de nudges?We describe here an initiative to create a network on Nudging in Finance. The objective of this study is to test whether the use of nudges increases educational performance among students of Finance. In the area of Educational Innovation, we aim to answer the following question: Can we help students to improve their performance in Finance studies using nudge

    Determinación de producción de metano en caprinos alimentados con dietas con distintos cereales

    Full text link
    Three primiparous 1.5 year old Murciano-Granadina female goats in maintenance were used. Their average body weight was 33.08 ± 2.1 kg. The objective was to determine methane production in two diets differing of the type of cereal grain (barley or corn). Two consecutive digestibility trials were conducted using diets differing in the cereal type (barley or maize grains). The adaptation period has a duration of 7 days and the digestibility period 5 days. Methane production (CH4 ) was determined by indirect calorimetry with an open circuit mask adapted to small ruminants. Methane production was determined on day four of digestibility trial, before feeding and three more measurements every 35 minutes during feeding. There were no significant differences neither in dry matter intake (758 g MS/goat and day on average) nor in dry matter digestibility coefficients (CDMS= 69.2% on average). Significant differences (p<0.05) were observed in the methane production during the feeding time with levels of 0.69 and 0.77 l/h for the barley and maize based diets, respectively. No significant differences between diets were observed when CH4 was expressed on gross energy intake basis, and the value obtained for the experimental mixed diets was 4.8.Se utilizaron tres cabras primíparas de raza Murciano-Granadina de un año y medio de edad y en estado de mantenimiento, con un peso medio de 33,08 ± 2,1 kg, con el objeto de determinar la producción de metano al administrarles dos dietas que difirieron únicamente en el tipo de cereal (grano de cebada o maíz). Se realizaron dos pruebas de digestibilidad consecutivas mediante la administración de las dos dietas. Tras un periodo de adaptación de 7 días se analizó la digestibilidad aparente durante 5 días. La producción de metano (CH4) se determinó por calorimetría indirecta mediante una máscara de circuito abierto adaptada a pequeños rumiantes. El CH4 se midió el día 4 de la prueba de digestibilidad, antes de administrar la ración diaria y se realizaron tres medidas más cada 35 minutos mientras comían. No se observaron diferencias significativas en el consumo de materia seca (con 758 g MS/cabra y día de media), ni entre los coeficientes de digestibilidad de materia seca de las dos dietas (CDMS= 69,2% de media). Durante la comida se observaron diferencias (p<0,05) en la producción de metano con valores de 0,69 l/h para la dieta que contenía grano de cebada frente a 0,77 l/h para la dieta con grano de maíz. Cuando se expresó la producción de CH4 sobre la ingestión de energía (Ym) no se observaron diferencias significativas entre dietas, y el valor medio para las dietas mixtas estudiadas fue de 4,8.López Luján, MDC.; Ródenas Martínez, L.; Piquer Querol, O.; Cerisuelo, A.; Cervera Fras, MC.; Fernández Martínez, CJ. (2011). Determinación de producción de metano en caprinos alimentados con dietas con distintos cereales. Archivos de Zootecnia : Revista Trimestral. 60(232):943-951. http://hdl.handle.net/10251/45850S9439516023

    Diagnosis delay and follow-up strategies in colorectal cancer. Prognosis implications: a study protocol

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Controversy exists with regard to the impact that the different components of diagnosis delay may have on the degree of invasion and prognosis in patients with colorectal cancer. The follow-up strategies after treatment also vary considerably. The aims of this study are: a) to determine if the symptoms-to-diagnosis interval and the treatment delay modify the survival of patients with colorectal cancer, and b) to determine if different follow-up strategies are associated with a higher survival rate.</p> <p>Methods/Design</p> <p>Multi-centre study with prospective follow-up in five regions in Spain (Galicia, Balearic Islands, Catalonia, Aragón and Valencia) during the period 2010-2012. Incident cases are included with anatomopathological confirmation of colorectal cancer (International Classification of Diseases 9th revision codes 153-154) that formed a part of a previous study (n = 953).</p> <p>At the time of diagnosis, each patient was given a structured interview. Their clinical records will be reviewed during the follow-up period in order to obtain information on the explorations and tests carried out after treatment, and the progress of these patients.</p> <p>Symptoms-to-diagnosis interval is defined as the time calculated from the diagnosis of cancer and the first symptoms attributed to cancer. Treatment delay is defined as the time elapsed between diagnosis and treatment. In non-metastatic patients treated with curative intention, information will be obtained during the follow-up period on consultations performed in the digestive, surgery and oncology departments, as well as the endoscopies, tumour markers and imaging procedures carried out.</p> <p>Local recurrence, development of metastases in the follow-up, appearance of a new tumour and mortality will be included as outcome variables.</p> <p>Actuarial survival analysis with Kaplan-Meier curves, Cox regression and competitive risk survival analysis will be performed.</p> <p>Discussion</p> <p>This study will make it possible to verify if the different components of delay have an impact on survival rate in colon cancer and rectal cancer. In consequence, this multi-centre study will be able to detect the variability present in the follow-up of patients with colorectal cancer, and if this variability modifies the prognosis. Ideally, this study could determine which follow-up strategies are associated with a better prognosis in colorectal cancer.</p

    Des Forêts pour le Nouveau Millénaire - DES FORÊTS À GÉRER DANS L’INTÉRÊT DES GENS ET DE LA NATURE

    Get PDF
    LA FAÇON DONT LES FORÊTS SONT PERÇUES ET LEURS UTILISATIONS ONT BEAUCOUP CHANGÉ AU COURS DES DERNIÈRES ANNÉES. LES FORÊTS NE SONT PLUS CONSIDÉRÉES COMME ÉTANT UNIQUEMENT DES SOURCES DE BOIS MAIS DES ÉCOSYSTÈMES COMPLEXES QUI PERMETTENT À DES COMMUNAUTÉS DE SE DÉVELOPPER ET OFFRENT TOUTE UNE GAMME DE PRODUITS ET DE SERVICES ENVIRONNEMENTAUX. ON RECONNAÎT AUJOURD’HUI QUE LES FORÊTS PEUVENT CONTRIBUER AU DÉVELOPPEMENT RURAL ET À LA LUTTE CONTRE LA PAUVRETÉ.Forêt, économie

    Bosques para el Nuevo Milenio - BOSQUES QUE BENEFICIEN A LA GENTE Y SUSTENTEN LA NATURALEZA

    Get PDF
    LAS MANERAS DE PERCIBIR Y USAR LOS BOSQUES HAN CAMBIADO DRAMÁTICAMENTE DURANTE LOS ÚLTIMOS AÑOS. YA NO SE CONSIDERA MÁS A LOS BOSQUES SÓLO COMO UNA FUENTE DE MADERA, SINO COMO ECOSISTEMAS COMPLEJOS QUE SUSTENTAN LAS FORMAS DE VIDA HUMANA Y SUMINISTRAN UNA GAMA DE PRODUCTOS Y SERVICIOS AMBIENTALES. AHORA ES AMPLIAMENTE RECONOCIDO QUE LOS BOSQUES PUEDEN CONTRIBUIR AL DESARROLLO RURAL Y AYUDAN A ALIVIAR LA POBREZA.Forest, economics, livelihoods
    corecore