2,536 research outputs found
Joint Effects of Asymmetric Payoff and Reciprocity Mechanisms on Collective Cooperation in Water Sharing Interactions: A Game Theoretic Perspective
published_or_final_versio
Experiments in the position detection of linear switched reluctance motor
Author name used in this publication: S. W. ZhaoAuthor name used in this publication: N. C. CheungAuthor name used in this publication: W. C. GanAuthor name used in this publication: J. M. YangVersion of RecordPublishe
Design and simulation of a testing fixture for planar magnetic levitation system control using switched reluctance actuator
Author name used in this publication: Norbert C. CheungRefereed conference paper2008-2009 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe
Integral sliding mode control with integral switching gain for magnetic levitation apparatus
Author name used in this publication: Norbert C. CheungRefereed conference paper2008-2009 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe
Recommended from our members
Exploring the performance of thin-film superconducting multilayers as kinetic inductance detectors for low-frequency detection
We have solved numerically the diffusive Usadel equations that describe the spatially varying superconducting proximity effect in Ti-Al thin-film bi- and trilayers with thickness values that are suitable for kinetic inductance detectors (KIDs) to operate as photon detectors with detection thresholds in the frequency range of 50-90 GHz. Using Nam's extension of the Mattis-Bardeen calculation of the superconductor complex conductivity, we show how to calculate the surface impedance for the spatially varying case, and hence the surface impedance quality factor. In addition, we calculate energy-and spatially-averaged quasiparticle lifetimes at temperatures well-below the transition temperature and compare to calculation in Al. Our results for the pair-breaking threshold demonstrate differences between bilayers and trilayers with the same total film thicknesses. We also predict high quality factors and long multilayer-averaged quasiparticle recombination times compared to thin-film Al. Our calculations give a route for designing KIDs to operate in this scientifically-important frequency regime
Thermodynamic investigation of latent-heat stores for pumped-thermal energy storage
As a large-scale energy storage technology, pumped-thermal energy storage uses thermodynamic cycles and thermal stores to achieve energy storage and release. In this paper, we explore the thermodynamic feasibility and potential of exploiting cascaded latent-heat stores in Joule-Brayton cycle-based pumped-thermal energy storage systems. A thermodynamic model of cascaded latent-heat stores is developed, and the effects of the heat store arrangement (i.e., total stage number and stage area) and fluid velocity in the thermal store tubes as key parameters that affect the heat storage and release rates, as well as the roundtrip efficiency, are evaluated. A pure electricity-storage mode and a combined heating and power mode are proposed and investigated, which allows such technologies to transform from a pure electricity storage system to an energy management system supplying power and multi-grade thermal and cold energy, and also to integrate with external waste heat and/or cold sources. Results show that the roundtrip efficiency of cascaded latent-heat stores is higher in the combined heating and power mode than in the pure electricity-storage mode, and that roundtrip efficiencies ranging from 62 % to 100 % can be achieved in the combined heating and power mode, accompanied by a corresponding pressure loss gradient ranging from 10 Pa/m to 2270 Pa/m. A comparison with packed-bed and liquid sensible-heat stores is also performed, and the results indicate that if these can be well designed, cascaded latent-heat stores can deliver comparable performance in terms of the total heat storage and release rates, roundtrip efficiency and flow resistance loss. Therefore, it is concluded that cascaded latent-heat stores can be considered for use in Joule-Brayton cycle-based pumped-thermal energy storage systems aimed at intelligent energy management for the provision of power and multi-grade heat and cold, if the costs can justify this decision
Recommended from our members
In situ measurements of HCN and CH3CN over the Pacific Ocean: Sources, sinks, and budgets
We report the first in situ measurements of hydrogen cyanide (HCN) and methyl cyanide (CH3CN, acetonitrile) from the Pacific troposphere (0-12 km) obtained during the NASA Transport and Chemical Evolution over the Pacific (TRACE-P) airborne mission (February-April 2001). Mean HCN and CH3CN mixing ratios of 243 ± 118 (median 218) ppt and 149 ± 56 (median 138) ppt, respectively, were measured. These in situ observations correspond to a mean tropospheric HCN column of 4.2 × 1015 molecules cm-2 and a CH3CN column of 2.5 × 1015 molecules cm-2. This is in good agreement with the 0-12 km HCN column of 4.4 (±0.6) × 1015 molecules cm-2 derived from infrared solar spectroscopic observations over Japan. Mixing ratios of HCN and CH3CN were greatly enhanced in pollution outflow from Asia and were well correlated with each other as well as with known tracers of biomass combustion (e.g., CH3Cl, CO). Volumetric enhancement (or emission) ratios (ERs) relative to CO in free tropospheric plumes, likely originating from fires, were 0.34% for HCN and 0.17% for CH3CN. ERs with respect to CH3Cl and CO in selected biomass burning (BB) plumes in the free troposphere and in boundary layer pollution episodes are used to estimate a global BB source of 0.8 ± 0.4 Tg (N) yr-1 for HCN and 0.4 ± 0.1 Tg (N) yr-1 for CH3CN. In comparison, emissions from industry and fossil fuel combustion are quite small (<0.05 Tg (N) yr-1). The vertical structure of HCN and CH3CN indicated reduced mixing ratios in the marine boundary layer (MBL). Using a simple box model, the observed gradients across the top of the MBL are used to derive an oceanic loss rate of 8.8 × 10-15 g (N) cm-2 s-1 for HCN and 3.4 × 10-15 g (N) cm-2 s-1 for CH3CN. An air-sea exchange model is used to conclude that this flux can be maintained if the oceans are undersaturated in HCN and CH3CN by 27% and 6%, respectively. These observations also correspond to an open ocean mean deposition velocity (vd) of 0.12 cm s-1 for HCN and 0.06 cm s-1 for CH3CN. It is inferred that oceanic loss is a dominant sink for these cyanides and that they deposit some 1.4 Tg (N) of nitrogen annually to the oceans. Assuming loss to the oceans and reaction with OH radicals as the major removal processes, a mean atmospheric residence time of 5.0 months for HCN and 6.6 months for CH3CN is calculated. A global budget analysis shows that the sources and sinks of HCN and CH3CN are roughly in balance but large uncertainties remain in part due to a lack of observational data from the atmosphere and the oceans. Pathways leading to the oceanic (and soil) degradation of these cyanides are poorly known but are expected to be biological in nature
Recommended from our members
Suppressed-gap millimetre wave kinetic inductance detectors using DC-bias current
Funder: CSC Cambridge ScholarshipIn this study, we evaluate the suitability of using DC-biased aluminium
resonators as low-frequency kinetic inductance detectors operating in the
frequency range of 50 - 120 GHz. Our analysis routine for supercurrent-biased
resonators is based on the Usadel equations and gives outputs including density
of states, complex conductivities, transmission line properties, and
quasiparticle lifetimes. Results from our analysis confirm previous
experimental observations on resonant frequency tuneability and retention of
high quality factor. Crucially, our analysis suggests that DC-biased resonators
demonstrate significantly suppressed superconducting density of states gap.
Consequently these resonators have lower frequency detection threshold and are
suitable materials for low-frequency kinetic inductance detectors
- …