Microcolony Imaging of Aspergillus fumigatus Treated with Echinocandins Reveals Both Fungistatic and Fungicidal Activities

Background: The echinocandins are lipopeptides that can be employed as antifungal drugs that inhibit the synthesis of 1,3b-glucans within the fungal cell wall. Anidulafungin and caspofungin are echinocandins used in the treatment of Candida infections and have activity against other fungi including Aspergillus fumigatus. The echinocandins are generally considered fungistatic against Aspergillus species. Methods: Culture of A. fumigatus from conidia to microcolonies on a support of porous aluminium oxide (PAO), combined with fluorescence microscopy and scanning electron microscopy, was used to investigate the effects of anidulafungin and caspofungin. The PAO was an effective matrix for conidial germination and microcolony growth. Additionally, PAO supports could be moved between agar plates containing different concentrations of echinocandins to change dosage and to investigate the recovery of fungal microcolonies from these drugs. Culture on PAO combined with microscopy and image analysis permits quantitative studies on microcolony growth with the flexibility of adding or removing antifungal agents, dyes, fixatives or osmotic stresses during growth with minimal disturbance of fungal microcolonies. Significance: Anidulafungin and caspofungin reduced but did not halt growth at the microcony level; additionally both drugs killed individual cells, particularly at concentrations around the MIC. Intact but not lysed cells showed rapid recovery when the drugs were removed. The classification of these drugs as either fungistatic or fungicidal is simplistic. Microcolon

Electronic structure and bonding properties of Si-doped hydrogenated amorphous carbon films

[[abstract]]This work investigates the C K-edge x-ray absorption near-edge structure (XANES), valence-band photoelectron spectroscopy (PES), and Fourier transform infrared (FTIR) spectra of Si-doped hydrogenated amorphous carbon films. The C K-edge XANES and valence-band PES spectra indicate that the sp2/sp3 population ratio decreases as the amount of tetramethylsilane vapor precursor increases during deposition, which suggest that Si doping% enhances sp3 and reduces sp2-bonding configurations. FTIR spectra show the formation of a polymeric sp3 C–Hn structure and Si–Hn bonds, which causes the Young’s modulus and hardness of the films to decrease with the increase of the Si content.[[incitationindex]]SCI[[booktype]]紙

Integrating Optoelectronic Tweezers for Individual Particle Manipulation with Digital Microfluidics Using Electrowetting-On-Dielectric (EWOD)

This paper presents the integration of two powerful technologies: manipulation of droplets (i.e., digital microfluidics) using electrowetting-on-dielectric (EWOD) and manipulation of individual particle inside the droplets using optoelectronic tweezers (OET). A novel platform for maintaining a viable cell culture environment is proposed as an application example, in which EWOD operations bring droplets containing cells, medium and waste into and out of the cell environment and OET operations address and manipulate the individual cells in coordination with the fluidic operations. Functions of EWOD and OET required to realize the concept are demonstrated. 1

Gradient lithography of engineered proteins to fabricate 2D and 3D cell culture microenvironments

Spatial patterning of proteins is a valuable technique for many biological applications and is the prevailing tool for defining microenvironments for cells in culture, a required procedure in developmental biology and tissue engineering research. However, it is still challenging to achieve protein patterns that closely mimic native microenvironments, such as gradient protein distributions with desirable mechanical properties. By combining projection dynamic mask lithography and protein engineering with non-canonical photosensitive amino acids, we demonstrate a simple, scalable strategy to fabricate any user-defined 2D or 3D stable gradient pattern with complex geometries from an artificial extracellular matrix (aECM) protein. We show that the elastic modulus and chemical nature of the gradient profile are biocompatible and allow useful applications in cell biological research

Effect of Aspect Ratio on Field Emission Properties of ZnO Nanorod Arrays

ZnO nanorod arrays are prepared on a silicon wafer through a multi-step hydrothermal process. The aspect ratios and densities of the ZnO nanorod arrays are controlled by adjusting the reaction times and concentrations of solution. The investigation of field emission properties of ZnO nanorod arrays revealed a strong dependency on the aspect ratio and their density. The aspect ratio and spacing of ZnO nanorod arrays are 39 and 167 nm (sample C), respectively, to exhibit the best field emission properties. The turn-on field and threshold field of the nanorod arrays are 3.83 V/μm and 5.65 V/μm, respectively. Importantly, the sample C shows a highest enhancement of factorβ, which is 2612. The result shows that an optimum density and aspect ratio of ZnO nanorod arrays have high efficiency of field emission

A multi-perspective dynamic feature concept in adaptive NC machining of complex freeform surfaces

This paper presents a new concept of feature for freeform surface machining that defines the changes in feature status during real manufacturing situations which have not been sufficiently addressed by current international standards and previous research in feature technology. These changes are multi-perspective, including (i) changes in depth-of-cut: the geometry of a feature in the depth-of-cut direction changes during different machining operations such as roughing, semi-finishing and finishing; (ii) changes across the surface: a surface may be divided into different machining regions (effectively sub-features) for the selection of appropriate manufacturing methods for each region such as different cutting tools, parameters, set-ups or machine tools; and (iii) changes in resources or manufacturing capabilities may require the re-planning of depth-of-cuts, division of machining regions and manufacturing operations (machines, tools, set-ups and parameters). Adding the above dynamic information to the part information models in current CAD systems (which only represent the final state of parts) would significantly improve the accuracy, efficiency and timeliness of manufacturing planning and optimisation, especially for the integrated NC machining planning for complex freeform surfaces. A case study in an aircraft manufacturing company will be included in this paper

Spatial autocorrelation analysis of health care hotspots in Taiwan in 2006

<p>Abstract</p> <p>Background</p> <p>Spatial analytical techniques and models are often used in epidemiology to identify spatial anomalies (hotspots) in disease regions. These analytical approaches can be used to not only identify the location of such hotspots, but also their spatial patterns.</p> <p>Methods</p> <p>In this study, we utilize spatial autocorrelation methodologies, including Global Moran's I and Local Getis-Ord statistics, to describe and map spatial clusters, and areas in which these are situated, for the 20 leading causes of death in Taiwan. In addition, we use the fit to a logistic regression model to test the characteristics of similarity and dissimilarity by gender.</p> <p>Results</p> <p>Gender is compared in efforts to formulate the common spatial risk. The mean found by local spatial autocorrelation analysis is utilized to identify spatial cluster patterns. There is naturally great interest in discovering the relationship between the leading causes of death and well-documented spatial risk factors. For example, in Taiwan, we found the geographical distribution of clusters where there is a prevalence of tuberculosis to closely correspond to the location of aboriginal townships.</p> <p>Conclusions</p> <p>Cluster mapping helps to clarify issues such as the spatial aspects of both internal and external correlations for leading health care events. This is of great aid in assessing spatial risk factors, which in turn facilitates the planning of the most advantageous types of health care policies and implementation of effective health care services.</p

Antimetastatic Effects of Norcantharidin on Hepatocellular Carcinoma by Transcriptional Inhibition of MMP-9 through Modulation of NF-kB Activity

The rate of morbidity and mortality of hepatocellular carcinoma (HCC) in Taiwan has not lessened because of difficulty in treating tumor metastasis. Norcantharidin (NCTD) is currently used as an anticancer drug for hepatoma, breast cancer, and colorectal adenocarcinoma. NCTD possesses various biological anticancer activities, including apoptosis. However, detailed effects and molecular mechanisms of NCTD on metastasis are unclear. Thus, HCC cells were subjected to treatment with NCTD and then analyzed to determine the effects of NCTD on cell metastasis.Modified Boyden chamber assays revealed that NCTD treatment inhibited cell migration and invasion capacities of HCC cells substantially. Results of zymography and western blotting showed that activities and protein levels of matrix metalloproteinase-9 (MMP-9) and urokinase plasminogen activator (u-PA) were inhibited by NCTD. Western blot analysis showed that NCTD inhibits phosphorylation of ERK1/2. Testing of mRNA level, quantitative real-time PCR, and promoter assays evaluated the inhibitory effects of NCTD on MMP-9 and u-PA expression in HCC cells. The chromatin immunoprecipitation (ChIP) assay for analyzing the genomic DNA sequences bound to these proteins was reactive to the transcription protein nuclear factor (NF)-kappaB, which was inhibited by NCTD. The expression of NF-kappa B was measured by western blot analysis, which revealed decreased nuclear-factor DNA-binding activity after NCTD treatment.NCTD inhibited MMP-9 and u-PA expression through the phosphorylation of ERK1/2 and NF-kappaB signaling pathway which serves as a powerful chemopreventive agent in HCC cell metastasis