517 research outputs found

    Effects of reducing dietary crude protein and metabolic energy in weaned piglets

    Get PDF
    The objective of this experiment was to determine the effects of a pure reduction in the dietary crude protein (CP) and metabolic energy (ME) contents on growth performance, nutrient digestibility, blood profile, faecal microflora and odour gas emission in weaned pigs. A total of 80 weaned piglets ((Landrace × Yorkshire) × Duroc) with a mean initial bodyweight (BW) of 6.8 ± 0.5 kg were randomly allotted to four treatments with four replicate pens of five piglets per pen (based on average BW) for 45 days. The dietary treatments consisted of i) CON: basal diet; ii) LME: reduction of 10% of ME in basal diet; iii) LCP: reduction of 10% of CP in basal diet; iv) MECP: reduction of 10% of CP and 10% of ME in basal diet. During the experimental period, average daily feed intake (ADFI) improved in piglets fed the LME and LCP diets, compared with those fed the CON diets. Average daily gain (ADG) and gain to feed (G : F) ratio decreased in piglets fed LCP, LME, and MECP diet, when compared with those fed the CON diet. However, during the total experimental period, ADG and G : F ratio were not affected by dietary treatment. With regard to nutrient digestibility, apparent total track digestibility (ATTD) of CP was not affected by experimental diets. The concentration of blood urea nitrogen (BUN) in blood decreased more in piglets fed LME, LCP, and MECP than those fed the CON diet. The emissions of ammonia (NH3), hydrogen sufide (H2S), and volatile fatty acids (VFAs) were lower in piglets fed LME, LCP, and MECP diet than those fed the CON diet. In conclusion, these results indicate that reduction in dietary CP and ME content did not decrease growth performance and nutrient digestibility, and they increased positive effects such as BUN and gas emission reduction.Keywords: Blood profile, digestibility, growth performance, odour emission, pi

    Enhancement of service life of polymer electrolyte fuel cells through application of nanodispersed ionomer

    Get PDF
    Copyright © 2020 The Authors, some rights reserved.In polymer electrolyte fuel cells (PEFCs), protons from the anode are transferred to the cathode through the ionomer membrane. By impregnating the ionomer into the electrodes, proton pathways are extended and high proton transfer efficiency can be achieved. Because the impregnated ionomer mechanically binds the catalysts within the electrode, the ionomer is also called a binder. To yield good electrochemical performance, the binder should be homogeneously dispersed in the electrode and maintain stable interfaces with other catalyst components and the membrane. However, conventional binder materials do not have good dispersion properties. In this study, a facile approach based on using a supercritical fluid is introduced to prepare a homogeneous nanoscale dispersion of the binder material in aqueous alcohol. The prepared binder exhibited high dispersion characteristics, crystallinity, and proton conductivity. High performance and durability were confirmed when the binder material was applied to a PEFC cathode electrode11sciescopu

    Spinor Field in Bianchi type-I Universe: regular solutions

    Get PDF
    Self-consistent solutions to the nonlinear spinor field equations in General Relativity has been studied for the case of Bianchi type-I (B-I) space-time. It has been shown that, for some special type of nonliearity the model provides regular solution, but this singularity-free solutions are attained at the cost of broken dominant energy condition in Hawking-Penrose theorem. It has also been shown that the introduction of Λ\Lambda-term in the Lagrangian generates oscillations of the B-I model, which is not the case in absence of Λ\Lambda term. Moreover, for the linear spinor field, the Λ\Lambda term provides oscillatory solutions, those are regular everywhere, without violating dominant energy condition. Key words: Nonlinear spinor field (NLSF), Bianch type -I model (B-I), Λ\Lambda term PACS 98.80.C CosmologyComment: RevTex, 21 page

    Graft immaturity and safety concerns in transplanted human kidney organoids

    Get PDF
    For chronic kidney disease, regeneration of lost nephrons with human kidney organoids derived from induced pluripotent stem (iPS) cells is proposed to be an attractive potential therapeutic option. It remains unclear, however, whether organoids transplanted into kidneys in vivo would be safe or functional. Here, we purified kidney organoids and transplanted them beneath the kidney capsules of immunodeficient mice to test their safety and maturity. Kidney organoid grafts survived for months after transplantation and became vascularized from host mouse endothelial cells. Nephron-like structures in grafts appeared more mature than kidney organoids in vitro, but remained immature compared with the neighboring mouse kidney tissue. Ultrastructural analysis revealed filtration barrier-like structures, capillary lumens, and tubules with brush border in the transplanted kidney organoids, which were more mature than those of the kidney organoids in vitro but not as organized as adult mammalian kidneys. Immaturity was a common feature of three separate differentiation protocols by immunofluorescence analysis and single cell RNA sequencing. Stroma of transplanted kidney organoid grafts were filled with vimentin-positive mesenchymal cells, and chondrogenesis, cystogenesis, and stromal expansion were observed in the long term. Transcription profiles showed that long-term maintenance after kidney organoid transplantation induced transcriptomic reprogramming with prominent suppression of cell-cycle-related genes and upregulation of extracellular matrix organization. Our data suggest that kidney organoids derived from iPS cells may be transplantable but strategies to improve nephron differentiation and purity are required before they can be applied in humans as a therapeutic option.11Ysciescopuskc

    Crystallization Characteristics of CaO-Al2O3-Based Mold Flux and Their Effects on In-Mold Performance during High-Aluminum TRIP Steels Continuous Casting

    Get PDF
    Crystallization behaviors of the newly developed lime-alumina-based mold fluxes for high-aluminum transformation induced plasticity (TRIP) steels casting were experimentally studied, and compared with those of lime-silica-based mold fluxes. The effects of mold flux crystallization characteristics on heat transfer and lubrication performance in casting high-Al TRIP steels were also evaluated. The results show that the crystallization temperatures of lime-alumina-based mold fluxes are much lower than those of lime-silica-based mold fluxes. Increasing B2O3 addition suppresses the crystallization of lime-alumina-based mold fluxes, while Na2O exhibits an opposite effect. In continuous cooling of lime-alumina-based mold fluxes with high B2O3 contents and a CaO/Al2O3 ratio of 3.3, faceted cuspidine precipitates first, followed by needle-like CaO center dot B2O3 or 9CaO center dot 3B(2)O(3)center dot CaF2. In lime-alumina-based mold flux with low B2O3 content (5.4 mass pct) and a CaO/Al2O3 ratio of 1.2, the formation of fine CaF2 takes place first, followed by blocky interconnected CaO center dot 2Al(2)O(3) as the dominant crystalline phase, and rod-like 2CaO center dot B2O3 precipitates at lower temperature during continuous cooling of the mold flux. In B2O3-free mold flux, blocky interconnected 3CaO center dot Al2O3 precipitates after CaF2 and 3CaO center dot 2SiO(2) formation, and takes up almost the whole crystalline fraction. The casting trials show that the mold heat transfer rate significantly decreases near the meniscus during the continuous casting using lime-alumina-mold fluxes with higher crystallinity, which brings a great reduction of surface depressions on cast slabs. However, excessive crystallinity of mold flux causes poor lubrication between mold and solidifying steel shell, which induces various defects such as drag marks on cast slab. Among the studied mold fluxes, lime-alumina-based mold fluxes with higher B2O3 contents and a CaO/Al2O3 ratio of 3.3 show comparatively improved performance.ope

    Study of the B^0 Semileptonic Decay Spectrum at the Upsilon(4S) Resonance

    Full text link
    We have made a first measurement of the lepton momentum spectrum in a sample of events enriched in neutral B's through a partial reconstruction of B0 --> D*- l+ nu. This spectrum, measured with 2.38 fb**-1 of data collected at the Upsilon(4S) resonance by the CLEO II detector, is compared directly to the inclusive lepton spectrum from all Upsilon(4S) events in the same data set. These two spectra are consistent with having the same shape above 1.5 GeV/c. From the two spectra and two other CLEO measurements, we obtain the B0 and B+ semileptonic branching fractions, b0 and b+, their ratio, and the production ratio f+-/f00 of B+ and B0 pairs at the Upsilon(4S). We report b+/b0=0.950 (+0.117-0.080) +- 0.091, b0 = (10.78 +- 0.60 +- 0.69)%, and b+ = (10.25 +- 0.57 +- 0.65)%. b+/b0 is equivalent to the ratio of charged to neutral B lifetimes, tau+/tau0.Comment: 14 page, postscript file also available at http://w4.lns.cornell.edu/public/CLN

    Observation of the Ξc+\Xi_c^+ Charmed Baryon Decays to Σ+Kπ+\Sigma^+ K^-\pi^+, Σ+Kˉ0\Sigma^+ \bar{K}^{*0}, and ΛKπ+π+\Lambda K^-\pi^+\pi^+

    Full text link
    We have observed two new decay modes of the charmed baryon Ξc+\Xi_c^+ into Σ+Kπ+\Sigma^+ K^-\pi^+ and Σ+Kˉ0\Sigma^+ \bar{K}^{*0} using data collected with the CLEO II detector. We also present the first measurement of the branching fraction for the previously observed decay mode Ξc+ΛKπ+π+\Xi_c^+\to\Lambda K^-\pi^+\pi^+. The branching fractions for these three modes relative to Ξc+Ξπ+π+\Xi_c^+\to\Xi^-\pi^+\pi^+ are measured to be 1.18±0.26±0.171.18 \pm 0.26 \pm 0.17, 0.92±0.27±0.140.92 \pm 0.27 \pm 0.14, and 0.58±0.16±0.070.58 \pm 0.16 \pm 0.07, respectively.Comment: 12 page uuencoded postscript file, postscript file also available through http://w4.lns.cornell.edu/public/CLN
    corecore