Timescales of carbon turnover in soils with mixed crystalline mineralogies

Organic matter–mineral associations stabilize much of the carbon (C) stored globally in soils. Metastable short-range-order (SRO) minerals such as allophane and ferrihydrite provide one mechanism for long-term stabilization of organic matter in young soil. However, in soils with few SRO minerals and a predominance of crystalline aluminosilicate or Fe (and Al) oxyhydroxide, C turnover should be governed by chemisorption with those minerals. Here, we correlate mineral composition from soils containing small amounts of SRO minerals with mean turnover time (TT) of C estimated from radiocarbon (¹⁴C) in bulk soil, free light fraction and mineral-associated organic matter. We varied the mineral amount and composition by sampling ancient soils formed on different lithologies in arid to subhumid climates in Kruger National Park (KNP), South Africa. Mineral contents in bulk soils were assessed using chemical extractions to quantify Fe oxyhydroxides and SRO minerals. Because of our interest in the role of silicate clay mineralogy, particularly smectite (2 : 1) and kaolinite (1 : 1), we separately quantified the mineralogy of the clay-sized fraction using X-ray diffraction (XRD) and measured ¹⁴C on the same fraction. <br><br> Density separation demonstrated that mineral associated C accounted for 40–70 % of bulk soil organic C in A and B1 horizons for granite, nephelinite and arid-zone gabbro soils, and &gt; 80 % in other soils. Organic matter strongly associated with the isolated clay-sized fraction represented only 9–47 % of the bulk soil C. The mean TT of C strongly associated with the clay-sized fraction increased with the amount of smectite (2 : 1 clays); in samples with &gt; 40 % smectite it averaged 1020 ± 460 years. The C not strongly associated with clay-sized minerals, including a combination of low-density C, the C associated with minerals of sizes between 2 µm and 2 cm (including Fe oxyhydroxides as coatings), and C removed from clay-sized material by 2 % hydrogen peroxide had TTs averaging 190 ± 190 years in surface horizons. Summed over the bulk soil profile, we found that smectite content correlated with the mean TT of bulk soil C across varied lithologies. The SRO mineral content in KNP soils was generally very low, except for the soils developed on gabbros under more humid climate that also had very high Fe and C contents with a surprisingly short, mean C TTs. In younger landscapes, SRO minerals are metastable and sequester C for long timescales. We hypothesize that in the KNP, SRO minerals represent a transient stage of mineral evolution and therefore lock up C for a shorter time. <br><br> Overall, we found crystalline Fe-oxyhydroxides (determined as the difference between Fe in dithionate citrate and oxalate extractions) to be the strongest predictor for soil C content, while the mean TT of soil C was best predicted from the amount of smectite, which was also related to more easily measured bulk properties such as cation exchange capacity or pH. Combined with previous research on C turnover times in 2 : 1 vs. 1 : 1 clays, our results hold promise for predicting C inventory and persistence based on intrinsic timescales of specific carbon–mineral interactions

Who the hell was that? Stories, bodies and actions in the world

This article explores a two-way relationship between stories and the experiential actions of bodies in the world. Through an autoethnographic approach, the article presents a series of interlinked story fragments in an effort to show and evoke a feel for the ways in which stories, bodies, and actions influence and shape each other over time. It offers some reflections on the experiences the stories portray from the perspective of a social constructionist conception of narrative theory and suggest that while stories exert a powerful influence on the actions of our bodies, our bodies intrude on or ‘talk back’ to this process because bodies have an existence beyond stories

7-Li(p,n) Nuclear Data Library for Incident Proton Energies to 150 MeV

We describe evaluation methods that make use of experimental data, and nuclear model calculations, to develop an ENDF-formatted data library for the reaction p + Li7 for incident protons with energies up to 150 MeV. The important 7-Li(p,n_0) and 7-Li(p,n_1) reactions are evaluated from the experimental data, with their angular distributions represented using Lengendre polynomial expansions. The decay of the remaining reaction flux is estimated from GNASH nuclear model calculations. The evaluated ENDF-data are described in detail, and illustrated in numerous figures. We also illustrate the use of these data in a representative application by a radiation transport simulation with the code MCNPX.Comment: 11 pages, 8 figures, LaTeX, submitted to Proc. 2000 ANS/ENS International Meeting, Nuclear Applications of Accelerator Technology (AccApp00), November 12-16, Washington, DC, US

Investigation of some of the factors influencing fingermark detection

© 2018 Elsevier B.V. The primary aims of fingermark detection research are to improve the quality and increase the rate of detection of identifiable impressions. This is usually performed through the development of new methods and technologies to provide alternatives to or improve current procedures. While research of this nature is important to pursue, it fails to address the underlying question related to the factors that affect the detection of a latent fingermark. There has been significant research that has examined the differences between techniques, donors and fingermark age, as well as the composition of latent fingermarks. However, they tend not to focus on determining how these factors influence the quality of the developed mark. This study involved the development and evaluation of over 14,000 natural fingermarks deposited on a variety of surfaces to examine the effect of substrate, age, donor variability (both inter- and intra-), depletions and type of finger on fingermark development. Fingermarks were deposited on four substrates (two non-porous and two porous) and developed with either indanedione-zinc (IND-Zn) or cyanoacrylate followed by rhodamine 6G staining (CA + R6G). Three independent assessors graded each mark on the quality of development using an absolute scale proposed by the UK Centre for Applied Science and Technology (CAST). The data generated from these assessments were then analysed for trends or other useful insights. The results from this work reaffirm that individual substrate characteristics (and the choice of development technique) play a significant role in determining the number and quality of marks developed. It was found that fingermarks were more likely to be detected on porous substrates and to also be of a higher quality than on non-porous. The effect of fingermark donor variability was also explored, with significant differences observed between donors and within donors. This research shows that current detection techniques do not detect all available fingermarks, reinforcing the need for further research into the fundamentals of fingermark detection in order to gain a better understanding of the techniques currently used. The study has identified considerations for the development of novel techniques and how we need to account for variability when designing fingermark research experiments

Use of Styryl 11 and STaR 11 for the Luminescence Enhancement of Cyanoacrylate-Developed Fingermarks in the Visible and Near-Infrared Regions

Abstract: In current casework, most post-cyanoacrylate stains rely on luminescence emission in the visible region (400-700nm). While traditional stains such as rhodamine 6G work well under most circumstances, some surfaces may generate background luminescence under the same conditions. Detection in the near-infrared region (NIR>700nm) has shown to be effective in minimizing the interferences from such surfaces. The laser dye styryl 11 generated strongly luminescent fingermarks when applied after cyanoacrylate fuming on all surfaces tested. When compared to rhodamine 6G, the dye was superior only when viewed in the NIR. Styryl 11 was subsequently combined with rhodamine 6G, and the mixed stain formulation (named StaR 11 by the authors) induced stronger luminescence compared with styryl 11 alone with an ability to visualize in both the visible and NIR regions. Reliable and consistent results were obtained when using either styryl 11 alone or the STaR 11 mixture. The enhancement achieved did not otherwise vary depending on the source of the fingermark secretions. With visualization possible in both the visible and NIR regions, the styryl 11/rhodamine 6G mixture showed significant potential as a post-cyanoacrylate stain. © 2011 American Academy of Forensic Sciences

A Wide-Field CCD Survey for Centaurs and Kuiper Belt Objects

A modified Baker-Nunn camera was used to conduct a wide-field survey of 1428 square degrees of sky near the ecliptic in search of bright Kuiper Belt objects and Centaurs. This area is an order of magnitude larger than any previously published CCD survey for Centaurs and Kuiper Belt Objects. No new objects brighter than red magnitude m=18.8 and moving at a rate 1"/hr to 20"/hr were discovered, although one previously discovered Centaur 1997 CU26 Chariklo was serendipitously detected. The parameters of the survey were characterized using both visual and automated techniques. From this survey the empirical projected surface density of Centaurs was found to be SigmaCentaur(m<18.8)=7.8(+16.0 -6.6)x10^-4 per square degree and we found a projected surface density 3sigma upper confidence limit for Kuiper Belt objects of SigmaKBO(m< 18.8)<4.1x10^-3 per square degree. We discuss the current state of the cumulative luminosity functions of both Centaurs and Kuiper Belt objects. Through a Monte Carlo simulation we show that the size distribution of Centaurs is consistent with a q=4 differential power law, similar to the size distribution of the parent Kuiper Belt Objects. The Centaur population is of order 10^7 (radius > 1 km) assuming a geometric albedo of 0.04. About 100 Centaurs are larger than 50 km in radius, of which only 4 are presently known. The current total mass of the Centaurs is 10^-4 Earth Masses. No dust clouds were detected resulting from Kuiper Belt object collisions, placing a 3sigma upper limit <600 collisionally produced clouds of m<18.8 per year.Comment: 13 pages, 5 figures, Accepted for Publication in A

An effective Physical Developer (PD) method for use in Australian laboratories

© 2018, © 2018 Australian Academy of Forensic Sciences. Physical Developer (PD) is an underutilized technique for the development of latent marks on porous surfaces that have been wet, or as a subsequent technique in a development sequence. It is a multistep technique that works by selectively reducing silver ions to silver metal at nucleating sites in fingermark residue. Its use is associated with a plethora of issues, largely surrounding the inherent instability of the working solution. Recently, one of the components of the working solution, Synperonic N, has ceased production, and the recommended replacement is Tween 20. This article addresses factors during PD processing using Tween 20, other than reagent formulations that should be considered when using the technique

Evaluation of one-step luminescent cyanoacrylate fuming

© 2016 Elsevier Ireland Ltd. One-step luminescent cyanoacrylates have recently been introduced as an alternative to the conventional cyanoacrylate fuming methods. These new techniques do not require the application of a luminescent post-treatment in order to enhance cyanoacrylate-developed fingermarks. In this study, three one-step polymer cyanoacrylates: CN Yellow Crystals (Aneval Inc.), PolyCyano UV (Foster + Freeman Ltd.) and PECA Multiband (BVDA), and one monomer cyanoacrylate: Lumikit™ (Crime Scene Technology), were evaluated against a conventional two-step cyanoacrylate fuming method (Cyanobloom (Foster + Freeman Ltd.) with rhodamine 6G stain). The manufacturers' recommended conditions or conditions compatible with the MVC™ 1000/D (Foster + Freeman Ltd.) were assessed with fingermarks aged for up to 8 weeks on non-porous and semi-porous substrates. Under white light, Cyanobloom generally gave better development than the one-step treatments across the substrates. Similarly when viewed under the respective luminescent conditions, Cyanobloom with rhodamine 6G stain resulted in improved contrast against the one-step treatments except on polystyrene, where PolyCyano UV and PECA Multiband gave better visualisation. Rhodamine 6G post-treatment of one-step samples did not significantly enhance the contrast of any of the one-step treatments against Cyanobloom/rhodamine 6G-treated samples

I Am Distinctive When I Belong: Meeting the Need for Optimal Distinctiveness through Team Identification

The development of stronger team identity has previously been explained through the social identity aspect of belonging. Although this has contributed much to our understanding of sport fans, it has neglected an alternative explanation for team identity, specifically the search for distinctiveness. How then do fans develop stronger team identity by \u27standing out\u27 as opposed to \u27fitting in\u27? This paper provides evidence of seven identity management strategies used by fans with a strong psychological connection to their chosen team. Saturation sampling was employed to interview 29 South African rugby union fans via semi-structured interviews, followed by a directed approach to content analysis. The results contribute a stronger explanation of how the psychological need for optimal distinctiveness functions within the attachment process towards stronger fan loyalty, and provides a more complete explanation for the way in which fans can \u27stand out\u27 while still belonging