The Impact of Improving Suicide Death Classification in South Korea: A Comparison with Japan and Hong Kong

Introduction The suicide rate of South Korea has increased dramatically during the past decades, as opposed to steadily decreasing trends in Japan and Hong Kong. Although the recent increase of suicide in South Korea may be related to changing socioeconomic conditions and other contextual factors, it may also reflect, in part, a reduction of misidentified suicide cases due to improving classification of manner of death. Method We compared the annual proportional change of suicide, undetermined death, and accidental death from South Korea with those of Japan and Hong Kong from 1992 to 2011; a greater proportional change of the manner-of-death categories during the period is indicative of a relatively less stable registration and hence a greater potential for misclassification bias on reported suicide trends. Subgroup analyses stratifying the deaths by methods were also conducted. To estimate the impact, the age-standardized rates of these three death categories in each site were calculated. Results We found that, during the 20-year observation period, the proportional change of suicide, undetermined death, and accidental death in South Korea was significantly greater than Japan and Hong Kong. Similar observations were made in subgroup analyses. While death rates of the three manners in Japan and Hong Kong generally moved in a parallel fashion, the increase of suicide in South Korea occurred concomitantly with a significant reduction of its accidental death rate. 43% of the increase in suicides could be attributed to the decrease in accidental deaths, while 57% of the increase could be due to fundamental causes. Conclusion Our data suggest that, during the mid-1990s and after, the increasing burden of suicide in South Korea initially was masked, in part, by misclassification. Thus, the later apparently rapid increase of suicides reflected steadily improving classification of manner of death, as well as a more fundamental increase in the suicide rate.published_or_final_versio

Selectively tunable optical Stark effect of anisotropic excitons in atomically thin ReS2

The optical Stark effect is a coherent light-matter interaction describing the modification of quantum states by non-resonant light illumination in atoms, solids and nanostructures. Researchers have strived to utilize this effect to control exciton states, aiming to realize ultra-high-speed optical switches and modulators. However, most studies have focused on the optical Stark effect of only the lowest exciton state due to lack of energy selectivity, resulting in low degree-of-freedom devices. Here, by applying a linearly polarized laser pulse to few-layer ReS2, where reduced symmetry leads to strong in-plane anisotropy of excitons, we control the optical Stark shift of two energetically separated exciton states. Especially, we selectively tune the Stark effect of an individual state with varying light polarization. This is possible because each state has a completely distinct dependence on light polarization due to different excitonic transition dipole moments. Our finding provides a methodology for energy-selective control of exciton states.111612Ysciescopu

Structure of a seeded palladium nanoparticle and its dynamics during the hydride phase transformation

Palladium absorbs large volumetric quantities of hydrogen at room temperature and ambient pressure, making the palladium hydride system a promising candidate for hydrogen storage. Here, we use Bragg coherent diffraction imaging to map the strain associated with defects in three dimensions before and during the hydride phase transformation of an individual octahedral palladium nanoparticle, synthesized using a seed-mediated approach. The displacement distribution imaging unveils the location of the seed nanoparticle in the final nanocrystal. By comparing our experimental results with a finite-element model, we verify that the seed nanoparticle causes a characteristic displacement distribution of the larger nanocrystal. During the hydrogen exposure, the hydride phase is predominantly formed on one tip of the octahedra, where there is a high number of lower coordinated Pd atoms. Our experimental and theoretical results provide an unambiguous method for future structure optimization of seed-mediated nanoparticle growth and in the design of palladium-based hydrogen storage systems

Reversed-phase high-performance liquid chromatography–fluorescence detection for the analysis of glutathione and its precursor γ-glutamyl cysteine in wines and model wines supplemented with oenological inactive dry yeast preparations

El pdf del artículo es la versión pre-print.A reversed-phase high-performance liquid chromatography-fluorescence detection methodology involving a pre-column derivatization procedure using 2,3-naphtalenedialdehyde in the presence of 5 and 0. 5 mM of dithiothreitol to determine total and reduced glutathione (GSH) and γ-glutamyl-cysteine (γ-glu-cys) in musts and wines has been set up and validated. The proposed method showed good linearity (R 2 >99% for reduced and total GSH, and R 2 >98% for γ-glu-cys) in synthetic wines, over a wide range of concentration (0-10 mg L -1). The limits of detection for reduced GSH in synthetic and real wines were almost the same (0. 13 and 0. 15 mg L -1, respectively) and slightly higher for γ-glu-cys (0. 24 mg L -1). The application of the method allowed knowing, for the first time, the amount of total and reduced GSH and γ-glu-cys released into synthetic wines by oenological preparations of commercial inactive dry yeast (IDY). In addition, the evolution of these three compounds during the winemaking and shelf life (0-9 months) of an industrially manufactured rosé wine supplemented with a GSH-enriched IDY showed that although GSH is effectively released from IDY, it is rapidly oxidized during alcoholic fermentation, contributing to the higher total GSH content determined in wines supplemented with GSH-enriched IDYs compared to control wines. © 2011 Springer Science+Business Media, LLC.IAO and JJRB acknowledge CAM and CSIC for their respective research grants. This work has been founded by PET2007-0134 project.Peer Reviewe

Whole genome sequencing reveals high clonal diversity of Escherichia coli isolated from patients in a tertiary care hospital in Moshi, Tanzania

Abstract Background Limited information regarding the clonality of circulating E. coli strains in tertiary care hospitals in low and middle-income countries is available. The purpose of this study was to determine the serotypes, antimicrobial resistance and virulence genes. Further, we carried out a phylogenetic tree reconstruction to determine relatedness of E. coli isolated from patients in a tertiary care hospital in Tanzania. Methods E. coli isolates from inpatients admitted at Kilimanjaro Christian Medical Centre between August 2013 and August 2015 were fully genome-sequenced at KCMC hospital. Sequence analysis was done for identification of resistance genes, Multi-Locus Sequence Typing, serotyping, and virulence genes. Phylogeny reconstruction using CSI Phylogeny was done to ascertain E. coli relatedness. Stata 13 (College Station, Texas 77,845 USA) was used to determine Cohen’s kappa coefficient of agreement between the phenotypically tested and whole genome sequence predicted antimicrobial resistance. Results Out of 38 E. coli isolates, 21 different sequence types (ST) were observed. Eight (21.1%) isolates belonged to ST131; of which 7 (87.5.%) were serotype O25:H4. Ten (18.4%) isolates belonged to ST10 clonal complex; of these, four (40.0%) were ST617 with serotype O89:H10. Twenty-eight (73.7%) isolates carried genes encoding beta-lactam resistance enzymes. On average, agreement across all drugs tested was 83.9%. Trimethoprim/sulphamethoxazole (co-trimoxazole) showed moderate agreement: 45.8%, kappa =15% and p = 0.08. Amoxicillin-clavulanate showed strongest agreement: 87.5%, kappa = 74% and p = 0.0001. Twenty-two (57.9%) isolates carried virulence factors for host cells adherence and 25 (65.7%) for factors that promote E. coli immune evasion by increasing survival in serum. The phylogeny analysis showed that ST131 clustering close together whereas ST10 clonal complex had a very clear segregation of the ST617 and a mix of the rest STs. Conclusion There is a high diversity of E. coli isolated from patients admitted to a tertiary care hospital in Tanzania. This underscores the necessity to routinely screen all bacterial isolates of clinical importance in tertiary health care facilities. WGS use for laboratory-based surveillance can be an effective early warning system for emerging pathogens and resistance mechanisms in LMICs

How to survey displaced workers in Switzerland ? Sources of bias and ways around them

Studying career outcomes after job loss is challenging because individually displaced worker form a self-selected group. Indeed, the same factors causing the workers to lose their jobs, such as lack of motivation, may also reduce their re-employment prospects. Using data from plant closures where all workers were displaced irrespective of their individual characteristics offers a way around this selection bias. There is no systematic data collection on workers displaced by plant closure in Switzerland. Accordingly, we conducted our own survey on 1200 manufacturing workers who had lost their job 2 years earlier. The analysis of observational data gives rise to a set of methodological challenges, in particular nonresponse bias. Our survey addressed this issue by mixing data collection modes and repeating contact attempts. In addition, we combined the survey data with data from the public unemployment register to examine the extent of nonresponse bias. Our analysis suggests that some of our adjustments helped to reduce bias. Repeated contact attempts increased the response rate, but did not reduce nonresponse bias. In contrast, using telephone interviews in addition to paper questionnaires helped to substantially improve the participation of typically underrepresented subgroups. However, the survey respondents still differ from nonrespondents in terms of age, education and occupation. Interestingly, these differences have no significant impact on the substantial conclusion about displaced workers' re-employment prospects

Thermal Properties of Carbon Nanotube–Copper Composites for Thermal Management Applications

Carbon nanotube–copper (CNT/Cu) composites have been successfully synthesized by means of a novel particles-compositing process followed by spark plasma sintering (SPS) technique. The thermal conductivity of the composites was measured by a laser flash technique and theoretical analyzed using an effective medium approach. The experimental results showed that the thermal conductivity unusually decreased after the incorporation of CNTs. Theoretical analyses revealed that the interfacial thermal resistance between the CNTs and the Cu matrix plays a crucial role in determining the thermal conductivity of bulk composites, and only small interfacial thermal resistance can induce a significant degradation in thermal conductivity for CNT/Cu composites. The influence of sintering condition on the thermal conductivity depended on the combined effects of multiple factors, i.e. porosity, CNTs distribution and CNT kinks or twists. The composites sintered at 600°C for 5 min under 50 MPa showed the maximum thermal conductivity. CNT/Cu composites are considered to be a promising material for thermal management applications